[Thu Feb 16 06:55:29 2012] Detection parameters:
  Position = (268.4, 302.1) = 18 20 28.08 74 32 55.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.6 +/- 32.5
  Background counts = 468.0
  Rate = 0.02 +/- 0.004

[Thu Feb 16 06:55:30 2012] Off-axis axis estimate = 2.20'
[Thu Feb 16 07:00:29 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 07:00:29 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Thu Feb 16 07:00:29 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.005
[Thu Feb 16 07:00:29 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.53"
[Thu Feb 16 07:13:13 2012] fullrun_pn_xmm0602420601_pi300-10000_cl_pass0_src3.ximg exists
[Thu Feb 16 07:13:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602420601_pi300-10000_cl_pass0_src3.csv
[Thu Feb 16 07:13:13 2012] fullrun_pn_xmm0602420601_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Feb 16 07:13:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602420601_pi300-10000_cl_pass0_src3.csv
[Thu Feb 16 07:13:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602420601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602420601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 07:13:13 2012] fullrun_pn_xmm0602420601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Feb 16 07:13:13 2012] fullrun_pn_xmm0602420601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Feb 16 07:13:13 2012] Fit fullrun_pn_xmm0602420601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Feb 16 07:28:53 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.227995 pixels away
[Thu Feb 16 07:28:53 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 07:28:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 07:28:53 2012] Assessing source extent using major
[Thu Feb 16 07:28:53 2012] Source does appear to be extended
[Thu Feb 16 07:28:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 07:28:59 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 07:28:59 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Thu Feb 16 07:28:59 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.005
[Thu Feb 16 07:28:59 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.53"
[Thu Feb 16 08:10:37 2012] fullrun_pn_xmm0602420601_pi300-10000_cl_pass1_src3.ximg exists
[Thu Feb 16 08:10:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602420601_pi300-10000_cl_pass1_src3.csv
[Thu Feb 16 08:10:37 2012] fullrun_pn_xmm0602420601_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Feb 16 08:10:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602420601_pi300-10000_cl_pass1_src3.csv
[Thu Feb 16 08:10:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602420601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602420601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 08:10:37 2012] fullrun_pn_xmm0602420601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Feb 16 08:10:37 2012] fullrun_pn_xmm0602420601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Feb 16 08:10:37 2012] Fit fullrun_pn_xmm0602420601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Feb 16 08:35:23 2012] Spatial fit model total counts = 1475.730000, observed total counts = 1481.000000
[Thu Feb 16 08:35:23 2012] Offset between fit and detection position for source 3 = 3.575899 pixels
[Thu Feb 16 08:35:23 2012] 1495.423000 total counts/ 969.675000 bgd. counts: snr = 16.883580
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.575899 pixels
  Position = (265.3, 303.9) = 18 20 31.46 74 33 2.5
  Extent = 15.1 (15.0-30.1)", rotation angle = 0
  Source counts = 525.7 +/- 38.7
  Background counts = 969.7
  Rate = 0.2 +/- 0.01
[Thu Feb 16 08:35:23 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 08:35:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 08:35:23 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 08:35:23 2012] Source does appear to be extended
[Thu Feb 16 08:35:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 08:35:29 2012] XMMSAS src. selection expression = ellipse(23030.512000, 26387.476200, 903.174026, 903.174026, 0.000000, X, Y)
[Thu Feb 16 08:35:29 2012] Writing source region out to fullrun_pn_xmm0602420601_pi300-10000_pass1_cl_src3_src.reg
[Thu Feb 16 08:35:29 2012] Extracting stamp from image fullrun_pn_xmm0602420601_pi300-10000_cl_sm2.00.img.gz, (213, 252) - (317, 356)
[Thu Feb 16 08:35:29 2012] XMMSAS bgd. selection expression = annulus(23030.512000, 26387.476200, 1505.290043, 3010.580087, X, Y)
[Thu Feb 16 08:35:29 2012] Writing fullrun_pn_xmm0602420601_pi300-10000_pass1_cl_src3.gif
[Thu Feb 16 08:36:56 2012] Mean detx,y = (-3093.60, -397.09) 
[Thu Feb 16 08:36:59 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 08:37:44 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 08:37:44 2012] Setting source spectrum file to fullrun_pn_xmm0602420601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Feb 16 08:37:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0602420601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Feb 16 09:09:06 2012] Updating aperture counts using extracted products
[Thu Feb 16 09:09:06 2012] Error reading totcts from fullrun_pn_xmm0602420601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Feb 16 09:09:06 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 09:09:06 2012] Using photon index=1.80, rate=0.204, arf fullrun_pn_xmm0602420601_pi300-10000_pass1_cl_src3.arf
[Thu Feb 16 09:09:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 09:09:06 2012] Updating source flux to 6.2e-13
[Thu Feb 16 09:11:24 2012] Reading fit data from xmm0602420601/analysis//spectral/fullrun_pn_xmm0602420601_pi300-10000_pass1_cl_src3_pl.csv
[Thu Feb 16 09:11:24 2012] Spectral fit parameter nH value = 3.72492e+21
[Thu Feb 16 09:11:24 2012] Spectral fit parameter PhoIndex value = 0.621543
[Thu Feb 16 09:11:24 2012] Failed to get F(0.3-8.0) from xmm0602420601/analysis//spectral/fullrun_pn_xmm0602420601_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu Feb 16 09:11:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 09:11:24 2012] Using Nh = 3.7e+21, photon index=0.62, rate=0.204, arf fullrun_pn_xmm0602420601_pi300-10000_pass1_cl_src3.arf
[Thu Feb 16 09:11:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 09:11:24 2012] Updating source flux to 1.9e-12