[Thu Feb 16 06:55:45 2012] Detection parameters:
  Position = (368.9, 314.4) = 18 18 38.56 74 33 47.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.2 +/- 21.1
  Background counts = 165.7
  Rate = 0.009 +/- 0.002

[Thu Feb 16 06:55:45 2012] Off-axis axis estimate = 5.24'
[Thu Feb 16 07:13:13 2012] Using EEF radius (= 9.05 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 07:13:13 2012] Initial guess for spatial extent in simple fitting = 9.05"
[Thu Feb 16 07:13:13 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.127
[Thu Feb 16 07:13:13 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.05"
[Thu Feb 16 07:27:31 2012] fullrun_mos1_xmm0602420601_pi300-10000_cl_pass0_src1.ximg exists
[Thu Feb 16 07:27:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602420601_pi300-10000_cl_pass0_src1.csv
[Thu Feb 16 07:27:31 2012] fullrun_mos1_xmm0602420601_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Feb 16 07:27:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602420601_pi300-10000_cl_pass0_src1.csv
[Thu Feb 16 07:27:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602420601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602420601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 07:27:31 2012] fullrun_mos1_xmm0602420601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Feb 16 07:27:31 2012] fullrun_mos1_xmm0602420601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Feb 16 07:27:31 2012] Fit fullrun_mos1_xmm0602420601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Feb 16 07:28:54 2012] Spatial fit model total counts = 1546.000000, observed total counts = 1546.000000
[Thu Feb 16 07:28:54 2012] Offset between fit and detection position for source 5 = 0.491878 pixels
[Thu Feb 16 07:28:54 2012] 1552.433000 total counts/ 1476.280000 bgd. counts: snr = 1.981995
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.491878 pixels
  Position = (369.3, 314.7) = 18 18 38.15 74 33 49.0
  Extent = 6.0 (3.8-8.5)", rotation angle = 0
  Source counts = 76.2 +/- 39.4
  Background counts = 1476.3
  Rate = 0.007 +/- 0.004
[Thu Feb 16 07:28:54 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 07:28:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 07:28:54 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 07:28:54 2012] Source does appear to be extended
[Thu Feb 16 07:28:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 08:10:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 08:10:37 2012] Initial guess for spatial extent in simple fitting = 5.95"
[Thu Feb 16 08:10:37 2012] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.146
[Thu Feb 16 08:10:37 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.95"
[Thu Feb 16 08:34:12 2012] fullrun_mos1_xmm0602420601_pi300-10000_cl_pass1_src1.ximg exists
[Thu Feb 16 08:34:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602420601_pi300-10000_cl_pass1_src1.csv
[Thu Feb 16 08:34:13 2012] fullrun_mos1_xmm0602420601_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Feb 16 08:34:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602420601_pi300-10000_cl_pass1_src1.csv
[Thu Feb 16 08:34:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602420601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602420601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 08:34:13 2012] fullrun_mos1_xmm0602420601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Feb 16 08:34:13 2012] fullrun_mos1_xmm0602420601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Feb 16 08:34:13 2012] Fit fullrun_mos1_xmm0602420601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Feb 16 08:35:24 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Thu Feb 16 08:35:24 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 08:35:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 08:35:24 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 08:35:24 2012] Source does appear to be extended
[Thu Feb 16 08:35:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 08:54:26 2012] XMMSAS src. selection expression = ellipse(32081.071000, 27331.001400, 357.102010, 357.102010, 0.000000, X, Y)
[Thu Feb 16 08:54:26 2012] Writing source region out to fullrun_mos1_xmm0602420601_pi300-10000_pass1_cl_src5_src.reg
[Thu Feb 16 08:54:26 2012] Extracting stamp from image fullrun_mos1_xmm0602420601_pi300-10000_cl_sm2.00.img.gz, (349, 294) - (390, 335)
[Thu Feb 16 08:54:26 2012] XMMSAS bgd. selection expression = annulus(32081.071000, 27331.001400, 595.170017, 1190.340034, X, Y)
[Thu Feb 16 08:54:26 2012] Writing fullrun_mos1_xmm0602420601_pi300-10000_pass1_cl_src5.gif
[Thu Feb 16 08:54:31 2012] Mean detx,y = (-3769.35, 4505.96) 
[Thu Feb 16 08:54:32 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 08:54:38 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 08:54:38 2012] Setting source spectrum file to fullrun_mos1_xmm0602420601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Feb 16 08:54:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602420601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Feb 16 08:57:40 2012] Not generating rmf since there are only 76 counts
[Thu Feb 16 08:57:40 2012] rmf not generated due to insufficient counts
[Thu Feb 16 09:09:06 2012] Updating aperture counts using extracted products
[Thu Feb 16 09:09:06 2012] Error reading totcts from fullrun_mos1_xmm0602420601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Feb 16 09:09:06 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 09:09:06 2012] Using photon index=1.80, rate=0.0074, arf fullrun_mos1_xmm0602420601_pi300-10000_pass1_cl_src5.arf
[Thu Feb 16 09:09:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 09:09:06 2012] Updating source flux to 1e-13
[Thu Feb 16 09:09:07 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Feb 16 09:10:15 2012] xmm0602420601/analysis//spectral/fullrun_mos1_xmm0602420601_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete