[Thu Feb 16 06:55:45 2012] Detection parameters:
  Position = (479.1, 371.7) = 18 16 37.69 74 37 54.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.8 +/- 19.9
  Background counts = 93.7
  Rate = 0.007 +/- 0.001

[Thu Feb 16 06:55:45 2012] Off-axis axis estimate = 14.13'
[Thu Feb 16 07:13:13 2012] Using EEF radius (= 13.49 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 07:13:13 2012] Initial guess for spatial extent in simple fitting = 13.49"
[Thu Feb 16 07:13:13 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.079
[Thu Feb 16 07:13:13 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.49"
[Thu Feb 16 07:27:31 2012] fullrun_mos1_xmm0602420601_pi300-10000_cl_pass0_src3.ximg exists
[Thu Feb 16 07:27:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602420601_pi300-10000_cl_pass0_src3.csv
[Thu Feb 16 07:27:31 2012] fullrun_mos1_xmm0602420601_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Feb 16 07:27:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602420601_pi300-10000_cl_pass0_src3.csv
[Thu Feb 16 07:27:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602420601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602420601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 07:27:31 2012] fullrun_mos1_xmm0602420601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Feb 16 07:27:31 2012] fullrun_mos1_xmm0602420601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Feb 16 07:27:31 2012] Fit fullrun_mos1_xmm0602420601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Feb 16 07:28:54 2012] Spatial fit model total counts = 1410.720000, observed total counts = 1410.000000
[Thu Feb 16 07:28:54 2012] Offset between fit and detection position for source 2 = 4.003205 pixels
[Thu Feb 16 07:28:54 2012] 1374.378000 total counts/ 1162.890000 bgd. counts: snr = 6.201781
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 4.003205 pixels
  Position = (477.3, 375.2) = 18 16 39.63 74 38 7.9
  Extent = 27.0 (26.9-54.0)", rotation angle = 0
  Source counts = 211.5 +/- 37.1
  Background counts = 1162.9
  Rate = 0.02 +/- 0.004
[Thu Feb 16 07:28:54 2012] Source 2 is offset by -2.590625 and 0.363471 pixels which is larger than
2 X fitted extent = 1.553517 x 1.553517, not incorporating fit results
[Thu Feb 16 07:28:54 2012] Source 2 is offset by 2.354443 and 2.086391 pixels which is larger than
2 X fitted extent = 1.520248 x 1.520248, not incorporating fit results
[Thu Feb 16 07:28:54 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 07:28:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 07:28:54 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 07:28:54 2012] Source does appear to be extended
[Thu Feb 16 07:28:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 07:28:54 2012] Source is confused with source 6
[Thu Feb 16 08:10:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 08:10:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 16 08:10:37 2012] Initial guess for spatial extent in simple fitting = 26.99"
[Thu Feb 16 08:10:37 2012] source mask rpix=6.2, npix_max = 179, mask sum = 169, frac = 0.940
[Thu Feb 16 08:10:37 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 26.99"
[Thu Feb 16 08:34:13 2012] fullrun_mos1_xmm0602420601_pi300-10000_cl_pass1_src3.ximg exists
[Thu Feb 16 08:34:13 2012] fullrun_mos1_xmm0602420601_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Feb 16 08:34:13 2012] Fit fullrun_mos1_xmm0602420601_pi300-10000_cl_pass1_src3 appears to have run properly
[Thu Feb 16 08:34:13 2012] fullrun_mos1_xmm0602420601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Feb 16 08:34:13 2012] fullrun_mos1_xmm0602420601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Feb 16 08:34:13 2012] Fit fullrun_mos1_xmm0602420601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Feb 16 08:35:24 2012] Warning, spatial fit 3 centroid is now closest to src. 1
[Thu Feb 16 08:35:24 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 08:35:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 08:35:24 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 08:35:24 2012] Source does appear to be extended
[Thu Feb 16 08:35:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 08:54:26 2012] XMMSAS src. selection expression = ellipse(41472.903600, 32597.936000, 1619.340047, 1619.340047, 0.000000, X, Y)
[Thu Feb 16 08:54:26 2012] Writing source region out to fullrun_mos1_xmm0602420601_pi300-10000_pass1_cl_src2_src.reg
[Thu Feb 16 08:54:26 2012] Extracting stamp from image fullrun_mos1_xmm0602420601_pi300-10000_cl_sm2.00.img.gz, (384, 282) - (570, 468)
[Thu Feb 16 08:54:26 2012] XMMSAS bgd. selection expression = annulus(41472.903600, 32597.936000, 2698.900078, 5397.800155, X, Y) && !ellipse(41588.918000, 34213.701200, 2192.944063, 786.412023, 65.202000, X, Y) && !ellipse(42558.970000, 31093.098000, 2162.496062, 2162.496062, 0.000000, X, Y) && !ellipse(42092.462189, 32635.853180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41318.237061, 31292.323395, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 08:54:26 2012] Writing fullrun_mos1_xmm0602420601_pi300-10000_pass1_cl_src2.gif
[Thu Feb 16 08:55:41 2012] Mean detx,y = (-4741.28, 14953.34) 
[Thu Feb 16 08:55:42 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 08:56:22 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 08:56:23 2012] Setting source spectrum file to fullrun_mos1_xmm0602420601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Feb 16 08:56:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602420601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Feb 16 09:09:06 2012] Updating aperture counts using extracted products
[Thu Feb 16 09:09:06 2012] Error reading totcts from fullrun_mos1_xmm0602420601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Feb 16 09:09:06 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 09:09:06 2012] Using photon index=1.80, rate=0.0206, arf fullrun_mos1_xmm0602420601_pi300-10000_pass1_cl_src2.arf
[Thu Feb 16 09:09:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 09:09:06 2012] Updating source flux to 4e-13
[Thu Feb 16 09:09:07 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Thu Feb 16 09:09:07 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Thu Feb 16 09:10:15 2012] xmm0602420601/analysis//spectral/fullrun_mos1_xmm0602420601_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete