[Sun Jun  2 01:30:19 2013] Detection parameters:
  Position = (392.8, 244.8) = 18 18 0.35 74 28 56.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.7 +/- 16.6
  Background counts = 41.1
  Rate = 0.02 +/- 0.002

[Sun Jun  2 01:30:20 2013] Off-axis axis estimate = 7.87'
[Sun Jun  2 01:44:00 2013] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 01:44:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  2 01:44:00 2013] Initial guess for spatial extent in simple fitting = 10.36"
[Sun Jun  2 01:44:00 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.083
[Sun Jun  2 01:44:00 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.36"
[Sun Jun  2 01:49:41 2013] fullrun_mos2_xmm0602420401_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun  2 01:49:41 2013] fullrun_mos2_xmm0602420401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun  2 01:49:41 2013] Fit fullrun_mos2_xmm0602420401_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun Jun  2 01:49:41 2013] fullrun_mos2_xmm0602420401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun  2 01:49:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602420401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun  2 01:49:41 2013] fullrun_mos2_xmm0602420401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun  2 01:49:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602420401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun  2 01:49:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602420401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602420401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 01:49:46 2013] Spatial fit model total counts = 461.880000, observed total counts = 462.000000
[Sun Jun  2 01:49:46 2013] Offset between fit and detection position for source 1 = 0.260628 pixels
[Sun Jun  2 01:49:46 2013] 461.164500 total counts/ 384.279000 bgd. counts: snr = 3.922122
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.260628 pixels
  Position = (392.6, 244.8) = 18 18 0.63 74 28 56.4
  Extent = 7.1 (4.5-9.5)" x 4.7 (3.3-7.9)", rotation angle = 103 (90-90) degrees
  Source counts = 76.9 +/- 21.5
  Background counts = 384.3
  Rate = 0.007 +/- 0.002
[Sun Jun  2 01:49:46 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 01:49:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 01:49:46 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 01:49:46 2013] Source does appear to be extended
[Sun Jun  2 01:49:46 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.57
[Sun Jun  2 01:56:49 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  2 01:56:49 2013] Initial guess for spatial extent in simple fitting = 5.92"
[Sun Jun  2 01:56:49 2013] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.867
[Sun Jun  2 01:56:49 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.92"
[Sun Jun  2 02:02:32 2013] fullrun_mos2_xmm0602420401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun  2 02:02:32 2013] fullrun_mos2_xmm0602420401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun  2 02:02:32 2013] Fit fullrun_mos2_xmm0602420401_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Jun  2 02:02:32 2013] fullrun_mos2_xmm0602420401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun  2 02:02:32 2013] fullrun_mos2_xmm0602420401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun  2 02:02:32 2013] Fit fullrun_mos2_xmm0602420401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun  2 02:02:37 2013] Spatial fit model total counts = 354.999000, observed total counts = 355.000000
[Sun Jun  2 02:02:37 2013] Offset between fit and detection position for source 1 = 0.089963 pixels
[Sun Jun  2 02:02:37 2013] 355.257100 total counts/ 286.531000 bgd. counts: snr = 4.060092
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.089963 pixels
  Position = (392.6, 244.8) = 18 18 0.56 74 28 56.6
  Extent = 5.2 (4.0-7.2)", rotation angle = 0
  Source counts = 68.7 +/- 18.8
  Background counts = 286.5
  Rate = 0.006 +/- 0.002
[Sun Jun  2 02:02:37 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 02:02:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 02:02:37 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 02:02:37 2013] Source does appear to be extended
[Sun Jun  2 02:02:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 02:10:02 2013] XMMSAS src. selection expression = ellipse(34110.933600, 21251.293000, 311.371809, 311.371809, 0.000000, X, Y)
[Sun Jun  2 02:10:02 2013] Writing source region out to fullrun_mos2_xmm0602420401_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun  2 02:10:02 2013] Extracting stamp from image fullrun_mos2_xmm0602420401_pi300-10000_cl_sm2.00.img.gz, (375, 227) - (411, 263)
[Sun Jun  2 02:10:02 2013] XMMSAS bgd. selection expression = annulus(34110.933600, 21251.293000, 518.953015, 1037.906030, X, Y)
[Sun Jun  2 02:10:02 2013] Writing fullrun_mos2_xmm0602420401_pi300-10000_pass1_cl_src1.gif
[Sun Jun  2 02:10:04 2013] Mean detx,y = (1324.07, -11074.20) 
[Sun Jun  2 02:10:06 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 02:10:18 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 02:10:18 2013] Setting source spectrum file to fullrun_mos2_xmm0602420401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun  2 02:10:18 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0602420401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun  2 02:10:57 2013] Not generating rmf since there are only 68 counts
[Sun Jun  2 02:10:57 2013] rmf not generated due to insufficient counts
[Sun Jun  2 02:11:59 2013] Updating aperture counts using extracted products
[Sun Jun  2 02:11:59 2013] Total counts from fullrun_mos2_xmm0602420401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 115.00
[Sun Jun  2 02:11:59 2013] Total counts from fullrun_mos2_xmm0602420401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 374.00
[Sun Jun  2 02:11:59 2013] Got source and background scale factors 307200.000000, 2542400.000000
[Sun Jun  2 02:11:59 2013] User source parameters:
  Position = (392.6, 244.8) = 18 18 0.56 74 28 56.6
  Extent = 5.2 (4.0-7.2)", rotation angle = 0
  Source aperture counts = 69.8 +/- 11.8
  Background aperture counts = 45.2
  Rate = 0.006 +/- 0.001

[Sun Jun  2 02:12:00 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 02:12:00 2013] Using photon index=1.80, rate=0.00617, arf fullrun_mos2_xmm0602420401_pi300-10000_pass1_cl_src1.arf
[Sun Jun  2 02:12:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 02:12:00 2013] Updating source flux to 1.5e-13
[Sun Jun  2 02:12:02 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  2 02:12:03 2013] xmm0602420401/analysis//spectral/fullrun_mos2_xmm0602420401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete