[Fri Mar 23 19:16:39 2012] Detection parameters:
  Position = (443.5, 299.9) = 22 37 44.76 35 18 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.0 +/- 12.2
  Background counts = 30.8
  Rate = 0.006 +/- 0.001

[Fri Mar 23 19:16:40 2012] Off-axis axis estimate = 10.52'
[Fri Mar 23 19:19:29 2012] Using EEF radius (= 11.69 ")to estimate initial spatial extent for simple fitting
[Fri Mar 23 19:19:29 2012] Initial guess for spatial extent in simple fitting = 11.69"
[Fri Mar 23 19:19:29 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.034
[Fri Mar 23 19:19:29 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 11.69"
[Fri Mar 23 20:49:43 2012] fullrun_pn_xmm0602390301_pi300-10000_cl_pass0_src23.ximg exists
[Fri Mar 23 20:49:43 2012] fullrun_pn_xmm0602390301_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Mar 23 20:49:43 2012] Fit fullrun_pn_xmm0602390301_pi300-10000_cl_pass0_src23 appears to have run properly
[Fri Mar 23 20:49:44 2012] fullrun_pn_xmm0602390301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Mar 23 20:49:44 2012] fullrun_pn_xmm0602390301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Mar 23 20:49:44 2012] Fit fullrun_pn_xmm0602390301_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Mar 23 22:45:18 2012] Source 25 is offset by 7.549967 and 2.078065 pixels which is larger than
2 X fitted extent = 1.346214 x 1.346214, not incorporating fit results
[Fri Mar 23 22:45:18 2012] Spatial fit model total counts = 330.984000, observed total counts = 332.000000
[Fri Mar 23 22:45:18 2012] Offset between fit and detection position for source 25 = 0.170025 pixels
[Fri Mar 23 22:45:18 2012] 329.997500 total counts/ 278.094000 bgd. counts: snr = 3.112439
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.170025 pixels
  Position = (443.4, 299.9) = 22 37 44.82 35 18 50.3
  Extent = 5.5 (4.1-7.8)", rotation angle = 0
  Source counts = 51.9 +/- 18.2
  Background counts = 278.1
  Rate = 0.002 +/- 0.0008
[Fri Mar 23 22:45:18 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 22:45:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 22:45:18 2012] Assessing source extent using major axis lower bound
[Fri Mar 23 22:45:18 2012] Source does appear to be extended
[Fri Mar 23 22:45:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 22:45:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 23 22:45:51 2012] Initial guess for spatial extent in simple fitting = 5.46"
[Fri Mar 23 22:45:51 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.973
[Fri Mar 23 22:45:51 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 5.46"
[Sat Mar 24 00:10:32 2012] fullrun_pn_xmm0602390301_pi300-10000_cl_pass1_src23.ximg exists
[Sat Mar 24 00:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602390301_pi300-10000_cl_pass1_src23.csv
[Sat Mar 24 00:10:32 2012] fullrun_pn_xmm0602390301_pi300-10000_cl_pass1_src23_1.ximg exists
[Sat Mar 24 00:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602390301_pi300-10000_cl_pass1_src23.csv
[Sat Mar 24 00:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602390301_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602390301_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 00:10:33 2012] fullrun_pn_xmm0602390301_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sat Mar 24 00:10:33 2012] fullrun_pn_xmm0602390301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sat Mar 24 00:10:33 2012] Fit fullrun_pn_xmm0602390301_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sat Mar 24 02:10:02 2012] Spatial fit model total counts = 338.890000, observed total counts = 339.000000
[Sat Mar 24 02:10:02 2012] Offset between fit and detection position for source 25 = 0.092524 pixels
[Sat Mar 24 02:10:02 2012] 340.987600 total counts/ 289.528000 bgd. counts: snr = 3.024274
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.092524 pixels
  Position = (443.3, 299.9) = 22 37 44.83 35 18 49.9
  Extent = 5.4 (4.1-7.5)", rotation angle = 0
  Source counts = 51.5 +/- 18.5
  Background counts = 289.5
  Rate = 0.002 +/- 0.0008
[Sat Mar 24 02:10:02 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 02:10:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 02:10:02 2012] Assessing source extent using major axis lower bound
[Sat Mar 24 02:10:02 2012] Source does appear to be extended
[Sat Mar 24 02:10:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 02:10:36 2012] XMMSAS src. selection expression = ellipse(38522.122800, 26039.611400, 326.122209, 326.122209, 0.000000, X, Y)
[Sat Mar 24 02:10:36 2012] Writing source region out to fullrun_pn_xmm0602390301_pi300-10000_pass1_cl_src25_src.reg
[Sat Mar 24 02:10:36 2012] Extracting stamp from image fullrun_pn_xmm0602390301_pi300-10000_cl_sm2.00.img.gz, (425, 281) - (462, 319)
[Sat Mar 24 02:10:36 2012] XMMSAS bgd. selection expression = annulus(38522.122800, 26039.611400, 543.537016, 1087.074031, X, Y) && !ellipse(37023.522736, 26635.996735, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 24 02:10:36 2012] Writing fullrun_pn_xmm0602390301_pi300-10000_pass1_cl_src25.gif
[Sat Mar 24 02:46:32 2012] Mean detx,y = (10912.52, -2461.64) 
[Sat Mar 24 02:46:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 24 02:47:03 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 24 02:47:04 2012] Setting source spectrum file to fullrun_pn_xmm0602390301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Mar 24 02:47:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0602390301_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sat Mar 24 04:09:45 2012] Not generating rmf since there are only 51 counts
[Sat Mar 24 04:09:45 2012] rmf not generated due to insufficient counts
[Sat Mar 24 05:08:12 2012] Updating aperture counts using extracted products
[Sat Mar 24 05:08:12 2012] Error reading totcts from fullrun_pn_xmm0602390301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Mar 24 05:08:15 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 24 05:08:15 2012] Using photon index=1.80, rate=0.00223, arf fullrun_pn_xmm0602390301_pi300-10000_pass1_cl_src25.arf
[Sat Mar 24 05:08:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 24 05:08:15 2012] Updating source flux to 1.2e-14
[Sat Mar 24 05:09:26 2012] Flag b found in src. 25 procflags, skipping spectral fitting
[Sat Mar 24 05:09:26 2012] Source 25 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Mar 24 05:09:41 2012] xmm0602390301/analysis//spectral/fullrun_pn_xmm0602390301_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete