[Fri Mar 23 19:16:41 2012] Detection parameters:
  Position = (499.6, 373.1) = 22 37 24.74 35 24 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.9 +/- 10.1
  Background counts = 11.5
  Rate = 0.002 +/- 0.0004

[Fri Mar 23 19:16:43 2012] Off-axis axis estimate = 15.56'
[Fri Mar 23 20:49:44 2012] Using EEF radius (= 14.21 ")to estimate initial spatial extent for simple fitting
[Fri Mar 23 20:49:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 23 20:49:44 2012] Initial guess for spatial extent in simple fitting = 14.21"
[Fri Mar 23 20:49:44 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.987
[Fri Mar 23 20:49:44 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 14.21"
[Fri Mar 23 21:58:05 2012] fullrun_mos1_xmm0602390301_pi300-10000_cl_pass0_src22.ximg exists
[Fri Mar 23 21:58:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602390301_pi300-10000_cl_pass0_src22.csv
[Fri Mar 23 21:58:05 2012] fullrun_mos1_xmm0602390301_pi300-10000_cl_pass0_src22_1.ximg exists
[Fri Mar 23 21:58:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602390301_pi300-10000_cl_pass0_src22.csv
[Fri Mar 23 21:58:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602390301_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602390301_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 21:58:05 2012] fullrun_mos1_xmm0602390301_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Fri Mar 23 21:58:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602390301_pi300-10000_cl_pass0_tfrozen_src22.csv
[Fri Mar 23 21:58:05 2012] fullrun_mos1_xmm0602390301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Fri Mar 23 21:58:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602390301_pi300-10000_cl_pass0_tfrozen_src22.csv
[Fri Mar 23 21:58:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602390301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602390301_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 22:45:26 2012] Spatial fit model total counts = 208.669000, observed total counts = 165.000000
[Fri Mar 23 22:45:26 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 23 22:45:26 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 22:45:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 22:45:26 2012] Assessing source extent using major
[Fri Mar 23 22:45:26 2012] Source does appear to be extended
[Fri Mar 23 22:45:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 00:10:33 2012] Using EEF radius (= 14.21 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 00:10:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 24 00:10:33 2012] Initial guess for spatial extent in simple fitting = 14.21"
[Sat Mar 24 00:10:33 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.987
[Sat Mar 24 00:10:33 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 14.21"
[Sat Mar 24 01:19:44 2012] fullrun_mos1_xmm0602390301_pi300-10000_cl_pass1_src22.ximg exists
[Sat Mar 24 01:19:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602390301_pi300-10000_cl_pass1_src22.csv
[Sat Mar 24 01:19:44 2012] fullrun_mos1_xmm0602390301_pi300-10000_cl_pass1_src22_1.ximg exists
[Sat Mar 24 01:19:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602390301_pi300-10000_cl_pass1_src22.csv
[Sat Mar 24 01:19:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602390301_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602390301_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 01:19:45 2012] fullrun_mos1_xmm0602390301_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sat Mar 24 01:19:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602390301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sat Mar 24 01:19:45 2012] fullrun_mos1_xmm0602390301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sat Mar 24 01:19:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602390301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sat Mar 24 01:19:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602390301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602390301_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 24 02:10:11 2012] Spatial fit model total counts = 208.132000, observed total counts = 165.000000
[Sat Mar 24 02:10:11 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar 24 02:10:11 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 02:10:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 02:10:11 2012] Assessing source extent using major
[Sat Mar 24 02:10:11 2012] Source does appear to be extended
[Sat Mar 24 02:10:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 04:18:54 2012] XMMSAS src. selection expression = ellipse(43421.014954, 32413.762634, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 24 04:18:54 2012] Writing source region out to fullrun_mos1_xmm0602390301_pi300-10000_pass1_cl_src7_src.reg
[Sat Mar 24 04:18:54 2012] Extracting stamp from image fullrun_mos1_xmm0602390301_pi300-10000_cl_sm2.00.img.gz, (462, 336) - (537, 411)
[Sat Mar 24 04:18:54 2012] XMMSAS bgd. selection expression = annulus(43421.014954, 32413.762634, 1087.500000, 2175.000000, X, Y)
[Sat Mar 24 04:18:54 2012] Writing fullrun_mos1_xmm0602390301_pi300-10000_pass1_cl_src7.gif
[Sat Mar 24 04:27:15 2012] Mean detx,y = (10096.13, 13255.48) 
[Sat Mar 24 04:27:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 24 04:27:49 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 24 04:27:50 2012] Setting source spectrum file to fullrun_mos1_xmm0602390301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Mar 24 04:27:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602390301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Mar 24 04:39:40 2012] Not generating rmf since there are only 47 counts
[Sat Mar 24 04:39:40 2012] rmf not generated due to insufficient counts
[Sat Mar 24 05:08:18 2012] Updating aperture counts using extracted products
[Sat Mar 24 05:08:18 2012] Error reading totcts from fullrun_mos1_xmm0602390301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Mar 24 05:08:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 24 05:08:20 2012] Using photon index=1.80, rate=0.00195, arf fullrun_mos1_xmm0602390301_pi300-10000_pass1_cl_src7.arf
[Sat Mar 24 05:08:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 24 05:08:20 2012] Updating source flux to 5.3e-14
[Sat Mar 24 05:08:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting