[Fri Mar 23 19:16:42 2012] Detection parameters:
  Position = (337.9, 322.3) = 22 38 22.28 35 20 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 208.2 +/- 17.7
  Background counts = 11.1
  Rate = 0.009 +/- 0.0008

[Fri Mar 23 19:16:43 2012] Off-axis axis estimate = 3.35'
[Fri Mar 23 20:49:44 2012] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Fri Mar 23 20:49:44 2012] Initial guess for spatial extent in simple fitting = 8.10"
[Fri Mar 23 20:49:44 2012] source mask rpix=1.9, npix_max = 22, mask sum = 18, frac = 0.806
[Fri Mar 23 20:49:44 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.10"
[Fri Mar 23 21:58:05 2012] fullrun_mos1_xmm0602390301_pi300-10000_cl_pass0_src3.ximg exists
[Fri Mar 23 21:58:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602390301_pi300-10000_cl_pass0_src3.csv
[Fri Mar 23 21:58:05 2012] fullrun_mos1_xmm0602390301_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Mar 23 21:58:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602390301_pi300-10000_cl_pass0_src3.csv
[Fri Mar 23 21:58:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602390301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602390301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 21:58:05 2012] fullrun_mos1_xmm0602390301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Mar 23 21:58:05 2012] fullrun_mos1_xmm0602390301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Mar 23 21:58:05 2012] Fit fullrun_mos1_xmm0602390301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Mar 23 22:45:26 2012] Source 11 is offset by 9.223646 and -1.392565 pixels which is larger than
2 X fitted extent = 1.464874 x 1.464874, not incorporating fit results
[Fri Mar 23 22:45:26 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 10.984141 pixels away
[Fri Mar 23 22:45:26 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 22:45:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 22:45:26 2012] Assessing source extent using major
[Fri Mar 23 22:45:26 2012] Source does appear to be extended
[Fri Mar 23 22:45:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 00:10:33 2012] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Sat Mar 24 00:10:33 2012] Initial guess for spatial extent in simple fitting = 8.10"
[Sat Mar 24 00:10:33 2012] source mask rpix=1.9, npix_max = 22, mask sum = 18, frac = 0.806
[Sat Mar 24 00:10:33 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.10"
[Sat Mar 24 01:19:44 2012] fullrun_mos1_xmm0602390301_pi300-10000_cl_pass1_src3.ximg exists
[Sat Mar 24 01:19:44 2012] fullrun_mos1_xmm0602390301_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Mar 24 01:19:44 2012] Fit fullrun_mos1_xmm0602390301_pi300-10000_cl_pass1_src3 appears to have run properly
[Sat Mar 24 01:19:45 2012] fullrun_mos1_xmm0602390301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Mar 24 01:19:45 2012] fullrun_mos1_xmm0602390301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Mar 24 01:19:45 2012] Fit fullrun_mos1_xmm0602390301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Mar 24 02:10:11 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 11.061655 pixels away
[Sat Mar 24 02:10:11 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 02:10:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 02:10:11 2012] Assessing source extent using major
[Sat Mar 24 02:10:11 2012] Source does appear to be extended
[Sat Mar 24 02:10:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 04:18:54 2012] XMMSAS src. selection expression = ellipse(29352.511200, 27993.900848, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 24 04:18:54 2012] Writing source region out to fullrun_mos1_xmm0602390301_pi300-10000_pass1_cl_src11_src.reg
[Sat Mar 24 04:18:54 2012] Extracting stamp from image fullrun_mos1_xmm0602390301_pi300-10000_cl_sm2.00.img.gz, (300, 285) - (375, 360)
[Sat Mar 24 04:18:54 2012] XMMSAS bgd. selection expression = annulus(29352.511200, 27993.900848, 1087.500000, 2175.000000, X, Y) && !ellipse(27581.771400, 27163.290000, 770.072822, 770.072822, 0.000000, X, Y) && !ellipse(27675.299988, 27445.908112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27439.055481, 30641.586334, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 24 04:18:54 2012] Writing fullrun_mos1_xmm0602390301_pi300-10000_pass1_cl_src11.gif
[Sat Mar 24 04:19:32 2012] Mean detx,y = (1642.09, 1260.21) 
[Sat Mar 24 04:19:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 24 04:19:45 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 24 04:19:45 2012] Setting source spectrum file to fullrun_mos1_xmm0602390301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Mar 24 04:19:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602390301_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Mar 24 04:37:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 24 04:37:14 2012] rmf not generated due to insufficient counts
[Sat Mar 24 05:08:16 2012] Updating aperture counts using extracted products
[Sat Mar 24 05:08:17 2012] Error reading totcts from fullrun_mos1_xmm0602390301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Mar 24 05:08:19 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 24 05:08:19 2012] Using photon index=1.80, rate=0.0092, arf fullrun_mos1_xmm0602390301_pi300-10000_pass1_cl_src11.arf
[Sat Mar 24 05:08:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 24 05:08:19 2012] Updating source flux to 9.6e-14
[Sat Mar 24 05:08:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting