[Mon Jul  9 13:58:05 2012] Detection parameters:
  Position = (321.0, 440.9) = 2 9 23.89 35 59 15.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.7 +/- 9.2
  Background counts = 12.6
  Rate = 0.002 +/- 0.0004

[Mon Jul  9 13:58:06 2012] Off-axis axis estimate = 10.45'
[Mon Jul  9 15:03:30 2012] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 15:03:30 2012] Initial guess for spatial extent in simple fitting = 11.66"
[Mon Jul  9 15:03:30 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.890
[Mon Jul  9 15:03:30 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 11.66"
[Mon Jul  9 15:33:29 2012] fullrun_mos2_xmm0602390201_pi300-10000_cl_pass0_src24.ximg exists
[Mon Jul  9 15:33:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602390201_pi300-10000_cl_pass0_src24.csv
[Mon Jul  9 15:33:29 2012] fullrun_mos2_xmm0602390201_pi300-10000_cl_pass0_src24_1.ximg exists
[Mon Jul  9 15:33:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602390201_pi300-10000_cl_pass0_src24.csv
[Mon Jul  9 15:33:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602390201_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602390201_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 15:33:30 2012] fullrun_mos2_xmm0602390201_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Mon Jul  9 15:33:30 2012] fullrun_mos2_xmm0602390201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Mon Jul  9 15:33:30 2012] Fit fullrun_mos2_xmm0602390201_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Mon Jul  9 15:33:44 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.741907 pixels away
[Mon Jul  9 15:33:44 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 15:33:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 15:33:44 2012] Assessing source extent using major
[Mon Jul  9 15:33:44 2012] Source does appear to be extended
[Mon Jul  9 15:33:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 16:38:36 2012] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 16:38:36 2012] Initial guess for spatial extent in simple fitting = 11.66"
[Mon Jul  9 16:38:36 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.890
[Mon Jul  9 16:38:36 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 11.66"
[Mon Jul  9 17:02:29 2012] fullrun_mos2_xmm0602390201_pi300-10000_cl_pass1_src20.ximg exists
[Mon Jul  9 17:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602390201_pi300-10000_cl_pass1_src20.csv
[Mon Jul  9 17:02:29 2012] fullrun_mos2_xmm0602390201_pi300-10000_cl_pass1_src20_1.ximg exists
[Mon Jul  9 17:02:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602390201_pi300-10000_cl_pass1_src20.csv
[Mon Jul  9 17:02:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602390201_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602390201_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 17:02:29 2012] fullrun_mos2_xmm0602390201_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Mon Jul  9 17:02:29 2012] fullrun_mos2_xmm0602390201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Mon Jul  9 17:02:29 2012] Fit fullrun_mos2_xmm0602390201_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Mon Jul  9 17:02:39 2012] Spatial fit model total counts = 151.438000, observed total counts = 146.000000
[Mon Jul  9 17:02:39 2012] Offset between fit and detection position for source 5 = 0.619324 pixels
[Mon Jul  9 17:02:39 2012] 148.455700 total counts/ 113.639000 bgd. counts: snr = 3.266058
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.619324 pixels
  Position = (320.4, 440.9) = 2 9 24.11 35 59 17.0
  Extent = 6.3 (4.4-10.4)", rotation angle = 0
  Source counts = 34.8 +/- 12.2
  Background counts = 113.6
  Rate = 0.001 +/- 0.0005
[Mon Jul  9 17:02:39 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 17:02:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 17:02:39 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 17:02:39 2012] Source does appear to be extended
[Mon Jul  9 17:02:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 17:54:01 2012] XMMSAS src. selection expression = ellipse(27825.036660, 38312.742200, 375.319211, 375.319211, 0.000000, X, Y)
[Mon Jul  9 17:54:01 2012] Writing source region out to fullrun_mos2_xmm0602390201_pi300-10000_pass1_cl_src5_src.reg
[Mon Jul  9 17:54:01 2012] Extracting stamp from image fullrun_mos2_xmm0602390201_pi300-10000_cl_sm2.00.img.gz, (299, 419) - (342, 463)
[Mon Jul  9 17:54:01 2012] XMMSAS bgd. selection expression = annulus(27825.036660, 38312.742200, 625.532018, 1251.064036, X, Y)
[Mon Jul  9 17:54:01 2012] Writing fullrun_mos2_xmm0602390201_pi300-10000_pass1_cl_src5.gif
[Mon Jul  9 17:59:33 2012] Mean detx,y = (-631.26, -14032.18) 
[Mon Jul  9 17:59:34 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  9 17:59:48 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  9 17:59:49 2012] Setting source spectrum file to fullrun_mos2_xmm0602390201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jul  9 17:59:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602390201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Jul  9 18:12:21 2012] Not generating rmf since there are only 34 counts
[Mon Jul  9 18:12:21 2012] rmf not generated due to insufficient counts
[Mon Jul  9 18:13:00 2012] Updating aperture counts using extracted products
[Mon Jul  9 18:13:00 2012] Error reading totcts from fullrun_mos2_xmm0602390201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jul  9 18:13:00 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 18:13:00 2012] Using photon index=1.80, rate=0.00137, arf fullrun_mos2_xmm0602390201_pi300-10000_pass1_cl_src5.arf
[Mon Jul  9 18:13:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 18:13:00 2012] Updating source flux to 3.8e-14
[Mon Jul  9 18:13:13 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting