[Mon Jul  9 13:57:44 2012] Detection parameters:
  Position = (150.9, 238.8) = 2 10 24.69 35 44 37.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.4 +/- 10.0
  Background counts = 13.0
  Rate = 0.003 +/- 0.0007

[Mon Jul  9 13:57:44 2012] Off-axis axis estimate = 11.54'
[Mon Jul  9 14:39:52 2012] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 14:39:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  9 14:39:52 2012] Initial guess for spatial extent in simple fitting = 12.20"
[Mon Jul  9 14:39:52 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.962
[Mon Jul  9 14:39:52 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 12.20"
[Mon Jul  9 15:03:29 2012] fullrun_mos1_xmm0602390201_pi300-10000_cl_pass0_src12.ximg exists
[Mon Jul  9 15:03:29 2012] fullrun_mos1_xmm0602390201_pi300-10000_cl_pass0_src12_1.ximg exists
[Mon Jul  9 15:03:29 2012] Fit fullrun_mos1_xmm0602390201_pi300-10000_cl_pass0_src12 appears to have run properly
[Mon Jul  9 15:03:29 2012] fullrun_mos1_xmm0602390201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Mon Jul  9 15:03:29 2012] fullrun_mos1_xmm0602390201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Jul  9 15:03:29 2012] Fit fullrun_mos1_xmm0602390201_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Mon Jul  9 15:33:40 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 14.207726 pixels away
[Mon Jul  9 15:33:40 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 15:33:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 15:33:40 2012] Assessing source extent using major
[Mon Jul  9 15:33:40 2012] Source does appear to be extended
[Mon Jul  9 15:33:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 16:16:08 2012] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 16:16:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  9 16:16:08 2012] Initial guess for spatial extent in simple fitting = 12.20"
[Mon Jul  9 16:16:08 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.962
[Mon Jul  9 16:16:08 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 12.20"
[Mon Jul  9 16:38:36 2012] fullrun_mos1_xmm0602390201_pi300-10000_cl_pass1_src12.ximg exists
[Mon Jul  9 16:38:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602390201_pi300-10000_cl_pass1_src12.csv
[Mon Jul  9 16:38:36 2012] fullrun_mos1_xmm0602390201_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon Jul  9 16:38:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602390201_pi300-10000_cl_pass1_src12.csv
[Mon Jul  9 16:38:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602390201_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602390201_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 16:38:36 2012] fullrun_mos1_xmm0602390201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon Jul  9 16:38:36 2012] fullrun_mos1_xmm0602390201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon Jul  9 16:38:36 2012] Fit fullrun_mos1_xmm0602390201_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Mon Jul  9 17:02:36 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 11.894540 pixels away
[Mon Jul  9 17:02:36 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 17:02:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 17:02:36 2012] Assessing source extent using major
[Mon Jul  9 17:02:36 2012] Source does appear to be extended
[Mon Jul  9 17:02:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 17:41:37 2012] XMMSAS src. selection expression = ellipse(13081.611526, 20723.675278, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul  9 17:41:37 2012] Writing source region out to fullrun_mos1_xmm0602390201_pi300-10000_pass1_cl_src14_src.reg
[Mon Jul  9 17:41:37 2012] Extracting stamp from image fullrun_mos1_xmm0602390201_pi300-10000_cl_sm2.00.img.gz, (113, 201) - (188, 276)
[Mon Jul  9 17:41:37 2012] XMMSAS bgd. selection expression = annulus(13081.611526, 20723.675278, 1087.500000, 2175.000000, X, Y) && !ellipse(15930.249542, 22101.922226, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul  9 17:41:37 2012] Writing fullrun_mos1_xmm0602390201_pi300-10000_pass1_cl_src14.gif
[Mon Jul  9 17:44:22 2012] Mean detx,y = (7291.07, 9460.62) 
[Mon Jul  9 17:44:23 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  9 17:44:32 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  9 17:44:32 2012] Setting source spectrum file to fullrun_mos1_xmm0602390201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Jul  9 17:44:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602390201_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Mon Jul  9 17:53:29 2012] Not generating rmf since there are only 48 counts
[Mon Jul  9 17:53:29 2012] rmf not generated due to insufficient counts
[Mon Jul  9 18:13:00 2012] Updating aperture counts using extracted products
[Mon Jul  9 18:13:00 2012] Error reading totcts from fullrun_mos1_xmm0602390201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Jul  9 18:13:00 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 18:13:00 2012] Using photon index=1.80, rate=0.00347, arf fullrun_mos1_xmm0602390201_pi300-10000_pass1_cl_src14.arf
[Mon Jul  9 18:13:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 18:13:00 2012] Updating source flux to 5.9e-14
[Mon Jul  9 18:13:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting