[Sun Dec 18 23:07:41 2011] Detection parameters:
  Position = (309.6, 334.6) = 7 58 27.98 37 48 10.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.4 +/- 15.8
  Background counts = 98.2
  Rate = 0.003 +/- 0.0004

[Sun Dec 18 23:07:41 2011] Off-axis axis estimate = 2.74'
[Sun Dec 18 23:12:38 2011] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 23:12:38 2011] Initial guess for spatial extent in simple fitting = 7.80"
[Sun Dec 18 23:12:38 2011] source mask rpix=1.8, npix_max = 21, mask sum = 17, frac = 0.808
[Sun Dec 18 23:12:38 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 7.80"
[Mon Dec 19 00:17:35 2011] fullrun_pn_xmm0602390101_pi300-10000_cl_pass0_src23.ximg exists
[Mon Dec 19 00:17:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602390101_pi300-10000_cl_pass0_src23.csv
[Mon Dec 19 00:17:35 2011] fullrun_pn_xmm0602390101_pi300-10000_cl_pass0_src23_1.ximg exists
[Mon Dec 19 00:17:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602390101_pi300-10000_cl_pass0_src23.csv
[Mon Dec 19 00:17:35 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602390101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602390101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 00:17:35 2011] fullrun_pn_xmm0602390101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Mon Dec 19 00:17:35 2011] fullrun_pn_xmm0602390101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Mon Dec 19 00:17:35 2011] Fit fullrun_pn_xmm0602390101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Mon Dec 19 01:02:36 2011] Source 24 is offset by -5.365843 and 6.782256 pixels which is larger than
2 X fitted extent = 2.144515 x 2.144515, not incorporating fit results
[Mon Dec 19 01:02:37 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 01:02:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 01:02:37 2011] Assessing source extent using major
[Mon Dec 19 01:02:37 2011] Source does appear to be extended
[Mon Dec 19 01:02:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 01:02:52 2011] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 01:02:52 2011] Initial guess for spatial extent in simple fitting = 7.80"
[Mon Dec 19 01:02:52 2011] source mask rpix=1.8, npix_max = 21, mask sum = 17, frac = 0.808
[Mon Dec 19 01:02:52 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 7.80"
[Mon Dec 19 02:03:01 2011] fullrun_pn_xmm0602390101_pi300-10000_cl_pass1_src23.ximg exists
[Mon Dec 19 02:03:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602390101_pi300-10000_cl_pass1_src23.csv
[Mon Dec 19 02:03:01 2011] fullrun_pn_xmm0602390101_pi300-10000_cl_pass1_src23_1.ximg exists
[Mon Dec 19 02:03:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602390101_pi300-10000_cl_pass1_src23.csv
[Mon Dec 19 02:03:01 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602390101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602390101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 02:03:01 2011] fullrun_pn_xmm0602390101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Mon Dec 19 02:03:01 2011] fullrun_pn_xmm0602390101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Mon Dec 19 02:03:01 2011] Fit fullrun_pn_xmm0602390101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Mon Dec 19 02:57:03 2011] Spatial fit model total counts = 812.832000, observed total counts = 813.000000
[Mon Dec 19 02:57:03 2011] Offset between fit and detection position for source 24 = 6.245659 pixels
[Mon Dec 19 02:57:03 2011] 791.168000 total counts/ 550.943000 bgd. counts: snr = 10.234458
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 6.245659 pixels
  Position = (304.0, 337.4) = 7 58 30.04 37 48 27.4
  Extent = 15.6 (15.6-31.2)", rotation angle = 0
  Source counts = 240.2 +/- 28.1
  Background counts = 550.9
  Rate = 0.005 +/- 0.0006
[Mon Dec 19 02:57:03 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 02:57:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 02:57:03 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 02:57:03 2011] Source does appear to be extended
[Mon Dec 19 02:57:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 02:57:28 2011] XMMSAS src. selection expression = ellipse(26396.364000, 29303.162000, 936.054027, 936.054027, 0.000000, X, Y)
[Mon Dec 19 02:57:28 2011] Writing source region out to fullrun_pn_xmm0602390101_pi300-10000_pass1_cl_src24_src.reg
[Mon Dec 19 02:57:28 2011] Extracting stamp from image fullrun_pn_xmm0602390101_pi300-10000_cl_sm2.00.img.gz, (250, 284) - (358, 391)
[Mon Dec 19 02:57:28 2011] XMMSAS bgd. selection expression = annulus(26396.364000, 29303.162000, 1560.090045, 3120.180090, X, Y) && !ellipse(26826.572560, 27772.746200, 477.682414, 477.682414, 0.000000, X, Y) && !ellipse(24781.912400, 32632.025800, 381.141611, 381.141611, 0.000000, X, Y) && !ellipse(28040.503400, 31767.702200, 444.630413, 444.630413, 0.000000, X, Y) && !ellipse(27612.633580, 29133.569800, 440.105613, 440.105613, 0.000000, X, Y) && !ellipse(25191.911200, 28938.795400, 1229.528035, 1229.528035, 0.000000, X, Y) && !ellipse(27374.040200, 26927.674000, 375.092011, 375.092011, 0.000000, X, Y) && !ellipse(26726.644745, 26385.579681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26395.034241, 25886.081055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22515.059387, 25880.186890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25114.463165, 25386.088593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26159.356000, 25434.200000, 1058.648030, 1058.648030, 0.000000, X, Y)
[Mon Dec 19 02:57:28 2011] Writing fullrun_pn_xmm0602390101_pi300-10000_pass1_cl_src24.gif
[Mon Dec 19 03:18:23 2011] Mean detx,y = (-206.59, -1778.14) 
[Mon Dec 19 03:18:29 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 03:19:13 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 03:19:13 2011] Setting source spectrum file to fullrun_pn_xmm0602390101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon Dec 19 03:19:13 2011] Setting bgd. spectrum file to fullrun_pn_xmm0602390101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Mon Dec 19 05:28:46 2011] Updating aperture counts using extracted products
[Mon Dec 19 05:28:46 2011] Error reading totcts from fullrun_pn_xmm0602390101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon Dec 19 05:28:47 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 05:28:47 2011] Using photon index=1.80, rate=0.00499, arf fullrun_pn_xmm0602390101_pi300-10000_pass1_cl_src24.arf
[Mon Dec 19 05:28:47 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 05:28:47 2011] Updating source flux to 1.3e-14
[Mon Dec 19 05:29:59 2011] Flag b found in src. 24 procflags, skipping spectral fitting