[Sun Dec 18 23:07:41 2011] Detection parameters:
  Position = (176.1, 347.7) = 7 59 16.97 37 49 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 214.7 +/- 20.5
  Background counts = 78.1
  Rate = 0.003 +/- 0.0003

[Sun Dec 18 23:07:41 2011] Off-axis axis estimate = 9.56'
[Sun Dec 18 23:12:38 2011] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 23:12:38 2011] Initial guess for spatial extent in simple fitting = 11.21"
[Sun Dec 18 23:12:38 2011] source mask rpix=2.6, npix_max = 37, mask sum = 30, frac = 0.792
[Sun Dec 18 23:12:38 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 11.21"
[Mon Dec 19 00:17:35 2011] fullrun_pn_xmm0602390101_pi300-10000_cl_pass0_src19.ximg exists
[Mon Dec 19 00:17:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602390101_pi300-10000_cl_pass0_src19.csv
[Mon Dec 19 00:17:35 2011] fullrun_pn_xmm0602390101_pi300-10000_cl_pass0_src19_1.ximg exists
[Mon Dec 19 00:17:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602390101_pi300-10000_cl_pass0_src19.csv
[Mon Dec 19 00:17:35 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602390101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602390101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 00:17:35 2011] fullrun_pn_xmm0602390101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Mon Dec 19 00:17:35 2011] fullrun_pn_xmm0602390101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Mon Dec 19 00:17:35 2011] Fit fullrun_pn_xmm0602390101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Mon Dec 19 01:02:36 2011] Source 20 is offset by -3.365093 and -0.147765 pixels which is larger than
2 X fitted extent = 1.482281 x 1.482281, not incorporating fit results
[Mon Dec 19 01:02:36 2011] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 14.554517 pixels away
[Mon Dec 19 01:02:37 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 01:02:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 01:02:37 2011] Assessing source extent using major
[Mon Dec 19 01:02:37 2011] Source does appear to be extended
[Mon Dec 19 01:02:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 01:02:37 2011] Source is confused with source 5
[Mon Dec 19 01:02:52 2011] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 01:02:52 2011] Initial guess for spatial extent in simple fitting = 11.21"
[Mon Dec 19 01:02:52 2011] source mask rpix=2.6, npix_max = 37, mask sum = 30, frac = 0.792
[Mon Dec 19 01:02:52 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 11.21"
[Mon Dec 19 02:03:01 2011] fullrun_pn_xmm0602390101_pi300-10000_cl_pass1_src19.ximg exists
[Mon Dec 19 02:03:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602390101_pi300-10000_cl_pass1_src19.csv
[Mon Dec 19 02:03:01 2011] fullrun_pn_xmm0602390101_pi300-10000_cl_pass1_src19_1.ximg exists
[Mon Dec 19 02:03:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602390101_pi300-10000_cl_pass1_src19.csv
[Mon Dec 19 02:03:01 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602390101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602390101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 02:03:01 2011] fullrun_pn_xmm0602390101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Mon Dec 19 02:03:01 2011] fullrun_pn_xmm0602390101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Mon Dec 19 02:03:01 2011] Fit fullrun_pn_xmm0602390101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Mon Dec 19 02:57:03 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 11.731635 pixels away
[Mon Dec 19 02:57:03 2011] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 11.648685 pixels away
[Mon Dec 19 02:57:03 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 02:57:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 02:57:03 2011] Assessing source extent using major
[Mon Dec 19 02:57:03 2011] Source does appear to be extended
[Mon Dec 19 02:57:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 02:57:28 2011] XMMSAS src. selection expression = ellipse(15274.240921, 30205.442017, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 19 02:57:28 2011] Writing source region out to fullrun_pn_xmm0602390101_pi300-10000_pass1_cl_src20_src.reg
[Mon Dec 19 02:57:28 2011] Extracting stamp from image fullrun_pn_xmm0602390101_pi300-10000_cl_sm2.00.img.gz, (139, 310) - (214, 385)
[Mon Dec 19 02:57:28 2011] XMMSAS bgd. selection expression = annulus(15274.240921, 30205.442017, 1087.500000, 2175.000000, X, Y) && !ellipse(14698.969086, 30048.808563, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 19 02:57:28 2011] Writing fullrun_pn_xmm0602390101_pi300-10000_pass1_cl_src20.gif
[Mon Dec 19 03:14:26 2011] Mean detx,y = (-11195.96, -4311.73) 
[Mon Dec 19 03:14:30 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 03:14:53 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 03:14:53 2011] Setting source spectrum file to fullrun_pn_xmm0602390101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Dec 19 03:14:53 2011] Setting bgd. spectrum file to fullrun_pn_xmm0602390101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Mon Dec 19 04:02:01 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec 19 04:02:01 2011] rmf not generated due to insufficient counts
[Mon Dec 19 05:28:46 2011] Updating aperture counts using extracted products
[Mon Dec 19 05:28:46 2011] Error reading totcts from fullrun_pn_xmm0602390101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Dec 19 05:28:47 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 05:28:47 2011] Using photon index=1.80, rate=0.00334, arf fullrun_pn_xmm0602390101_pi300-10000_pass1_cl_src20.arf
[Mon Dec 19 05:28:47 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 05:28:47 2011] Updating source flux to 2e-14
[Mon Dec 19 05:29:59 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting