[Sun Dec 18 23:08:23 2011] Detection parameters:
  Position = (245.0, 261.4) = 7 58 51.68 37 42 58.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.6 +/- 17.9
  Background counts = 110.7
  Rate = 0.002 +/- 0.0004

[Sun Dec 18 23:08:24 2011] Off-axis axis estimate = 4.71'
[Mon Dec 19 00:32:33 2011] Using EEF radius (= 8.79 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 00:32:33 2011] Initial guess for spatial extent in simple fitting = 8.79"
[Mon Dec 19 00:32:33 2011] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.787
[Mon Dec 19 00:32:33 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 8.79"
[Mon Dec 19 01:02:28 2011] fullrun_mos2_xmm0602390101_pi300-10000_cl_pass0_src21.ximg exists
[Mon Dec 19 01:02:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602390101_pi300-10000_cl_pass0_src21.csv
[Mon Dec 19 01:02:28 2011] fullrun_mos2_xmm0602390101_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Dec 19 01:02:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602390101_pi300-10000_cl_pass0_src21.csv
[Mon Dec 19 01:02:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602390101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602390101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 01:02:28 2011] fullrun_mos2_xmm0602390101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Dec 19 01:02:28 2011] fullrun_mos2_xmm0602390101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Dec 19 01:02:28 2011] Fit fullrun_mos2_xmm0602390101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Mon Dec 19 01:02:42 2011] Source 20 is offset by -0.551081 and -8.639025 pixels which is larger than
2 X fitted extent = 4.012055 x 4.012055, not incorporating fit results
[Mon Dec 19 01:02:42 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 01:02:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 01:02:42 2011] Assessing source extent using major
[Mon Dec 19 01:02:42 2011] Source does appear to be extended
[Mon Dec 19 01:02:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 02:20:57 2011] Using EEF radius (= 8.79 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 02:20:57 2011] Initial guess for spatial extent in simple fitting = 8.79"
[Mon Dec 19 02:20:57 2011] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.787
[Mon Dec 19 02:20:57 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 8.79"
[Mon Dec 19 02:56:52 2011] fullrun_mos2_xmm0602390101_pi300-10000_cl_pass1_src21.ximg exists
[Mon Dec 19 02:56:52 2011] fullrun_mos2_xmm0602390101_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon Dec 19 02:56:52 2011] Fit fullrun_mos2_xmm0602390101_pi300-10000_cl_pass1_src21 appears to have run properly
[Mon Dec 19 02:56:53 2011] fullrun_mos2_xmm0602390101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon Dec 19 02:56:53 2011] fullrun_mos2_xmm0602390101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Dec 19 02:56:53 2011] Fit fullrun_mos2_xmm0602390101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Mon Dec 19 02:57:12 2011] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 68.920400 pixels away
[Mon Dec 19 02:57:12 2011] Source 20 is offset by -0.531136 and -8.639025 pixels which is larger than
2 X fitted extent = 4.081393 x 4.081393, not incorporating fit results
[Mon Dec 19 02:57:12 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 02:57:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 02:57:12 2011] Assessing source extent using major
[Mon Dec 19 02:57:12 2011] Source does appear to be extended
[Mon Dec 19 02:57:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 05:00:03 2011] XMMSAS src. selection expression = ellipse(21262.485596, 22696.782867, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 19 05:00:03 2011] Writing source region out to fullrun_mos2_xmm0602390101_pi300-10000_pass1_cl_src20_src.reg
[Mon Dec 19 05:00:03 2011] Extracting stamp from image fullrun_mos2_xmm0602390101_pi300-10000_cl_sm2.00.img.gz, (207, 224) - (282, 299)
[Mon Dec 19 05:00:03 2011] XMMSAS bgd. selection expression = annulus(21262.485596, 22696.782867, 1087.500000, 2175.000000, X, Y) && !ellipse(19100.235260, 21881.294200, 385.904011, 385.904011, 0.000000, X, Y)
[Mon Dec 19 05:00:03 2011] Writing fullrun_mos2_xmm0602390101_pi300-10000_pass1_cl_src20.gif
[Mon Dec 19 05:05:42 2011] Mean detx,y = (6127.83, -4231.01) 
[Mon Dec 19 05:05:43 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 05:05:57 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 05:05:57 2011] Setting source spectrum file to fullrun_mos2_xmm0602390101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Dec 19 05:05:57 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0602390101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Mon Dec 19 05:26:23 2011] Not generating rmf since there are only 88 counts
[Mon Dec 19 05:26:23 2011] rmf not generated due to insufficient counts
[Mon Dec 19 05:28:48 2011] Updating aperture counts using extracted products
[Mon Dec 19 05:28:48 2011] Error reading totcts from fullrun_mos2_xmm0602390101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Dec 19 05:28:49 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 05:28:49 2011] Using photon index=1.80, rate=0.0019, arf fullrun_mos2_xmm0602390101_pi300-10000_pass1_cl_src20.arf
[Mon Dec 19 05:28:49 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 05:28:49 2011] Updating source flux to 2.9e-14
[Mon Dec 19 05:29:20 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting