[Sun Dec 18 23:08:23 2011] Detection parameters:
  Position = (408.3, 302.0) = 7 57 51.76 37 45 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 375.1 +/- 28.0
  Background counts = 117.1
  Rate = 0.008 +/- 0.0006

[Sun Dec 18 23:08:24 2011] Off-axis axis estimate = 7.97'
[Mon Dec 19 00:32:33 2011] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 00:32:33 2011] Initial guess for spatial extent in simple fitting = 10.41"
[Mon Dec 19 00:32:33 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.075
[Mon Dec 19 00:32:33 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 10.41"
[Mon Dec 19 01:02:28 2011] fullrun_mos2_xmm0602390101_pi300-10000_cl_pass0_src5.ximg exists
[Mon Dec 19 01:02:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602390101_pi300-10000_cl_pass0_src5.csv
[Mon Dec 19 01:02:28 2011] fullrun_mos2_xmm0602390101_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Dec 19 01:02:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602390101_pi300-10000_cl_pass0_src5.csv
[Mon Dec 19 01:02:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602390101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602390101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 01:02:28 2011] fullrun_mos2_xmm0602390101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Dec 19 01:02:28 2011] fullrun_mos2_xmm0602390101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Dec 19 01:02:28 2011] Fit fullrun_mos2_xmm0602390101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Dec 19 01:02:42 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 14.027388 pixels away
[Mon Dec 19 01:02:42 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 01:02:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 01:02:42 2011] Assessing source extent using major
[Mon Dec 19 01:02:42 2011] Source does appear to be extended
[Mon Dec 19 01:02:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 02:20:57 2011] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 02:20:57 2011] Initial guess for spatial extent in simple fitting = 10.41"
[Mon Dec 19 02:20:57 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.075
[Mon Dec 19 02:20:57 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 10.41"
[Mon Dec 19 02:56:52 2011] fullrun_mos2_xmm0602390101_pi300-10000_cl_pass1_src5.ximg exists
[Mon Dec 19 02:56:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602390101_pi300-10000_cl_pass1_src5.csv
[Mon Dec 19 02:56:52 2011] fullrun_mos2_xmm0602390101_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Dec 19 02:56:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602390101_pi300-10000_cl_pass1_src5.csv
[Mon Dec 19 02:56:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602390101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602390101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 02:56:52 2011] fullrun_mos2_xmm0602390101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Dec 19 02:56:52 2011] fullrun_mos2_xmm0602390101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Dec 19 02:56:52 2011] Fit fullrun_mos2_xmm0602390101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Dec 19 02:57:12 2011] Spatial fit model total counts = 471.000000, observed total counts = 471.000000
[Mon Dec 19 02:57:12 2011] Offset between fit and detection position for source 14 = 0.208591 pixels
[Mon Dec 19 02:57:12 2011] 469.138000 total counts/ 252.742000 bgd. counts: snr = 13.611642
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.208591 pixels
  Position = (408.4, 302.2) = 7 57 51.75 37 45 54.1
  Extent = 5.5 (4.9-6.5)", rotation angle = 0
  Source counts = 216.4 +/- 21.7
  Background counts = 252.7
  Rate = 0.004 +/- 0.0004
[Mon Dec 19 02:57:12 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 02:57:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 02:57:12 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 02:57:12 2011] Source does appear to be extended
[Mon Dec 19 02:57:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 05:00:03 2011] XMMSAS src. selection expression = ellipse(35478.316200, 26246.406600, 330.235210, 330.235210, 0.000000, X, Y)
[Mon Dec 19 05:00:03 2011] Writing source region out to fullrun_mos2_xmm0602390101_pi300-10000_pass1_cl_src14_src.reg
[Mon Dec 19 05:00:03 2011] Extracting stamp from image fullrun_mos2_xmm0602390101_pi300-10000_cl_sm2.00.img.gz, (389, 283) - (427, 321)
[Mon Dec 19 05:00:03 2011] XMMSAS bgd. selection expression = annulus(35478.316200, 26246.406600, 550.392016, 1100.784032, X, Y)
[Mon Dec 19 05:00:03 2011] Writing fullrun_mos2_xmm0602390101_pi300-10000_pass1_cl_src14.gif
[Mon Dec 19 05:01:06 2011] Mean detx,y = (-8315.94, -2611.22) 
[Mon Dec 19 05:01:08 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 05:01:12 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 05:01:12 2011] Setting source spectrum file to fullrun_mos2_xmm0602390101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Dec 19 05:01:12 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0602390101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Mon Dec 19 05:28:48 2011] Updating aperture counts using extracted products
[Mon Dec 19 05:28:48 2011] Error reading totcts from fullrun_mos2_xmm0602390101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Dec 19 05:28:49 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 05:28:49 2011] Using photon index=1.80, rate=0.00401, arf fullrun_mos2_xmm0602390101_pi300-10000_pass1_cl_src14.arf
[Mon Dec 19 05:28:49 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 05:28:49 2011] Updating source flux to 7.2e-14