[Mon Feb 13 22:39:52 2012] Detection parameters:
  Position = (290.9, 410.6) = 18 44 50.50 -2 47 16.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.4 +/- 14.5
  Background counts = 55.3
  Rate = 0.002 +/- 0.0004

[Mon Feb 13 22:39:53 2012] Off-axis axis estimate = 8.15'
[Mon Feb 13 23:24:04 2012] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 23:24:04 2012] Initial guess for spatial extent in simple fitting = 10.50"
[Mon Feb 13 23:24:04 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.883
[Mon Feb 13 23:24:04 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 10.50"
[Mon Feb 13 23:39:57 2012] fullrun_mos2_xmm0602350101_pi300-10000_cl_pass0_src17.ximg exists
[Mon Feb 13 23:39:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602350101_pi300-10000_cl_pass0_src17.csv
[Mon Feb 13 23:39:57 2012] fullrun_mos2_xmm0602350101_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Feb 13 23:39:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602350101_pi300-10000_cl_pass0_src17.csv
[Mon Feb 13 23:39:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602350101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602350101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 23:39:57 2012] fullrun_mos2_xmm0602350101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Feb 13 23:39:57 2012] fullrun_mos2_xmm0602350101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Feb 13 23:39:57 2012] Fit fullrun_mos2_xmm0602350101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Feb 13 23:40:06 2012] Spatial fit model total counts = 397.994000, observed total counts = 398.000000
[Mon Feb 13 23:40:06 2012] Offset between fit and detection position for source 1 = 0.240705 pixels
[Mon Feb 13 23:40:06 2012] 398.725900 total counts/ 355.375000 bgd. counts: snr = 2.299613
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.240705 pixels
  Position = (290.8, 410.3) = 18 44 50.53 -2 47 17.7
  Extent = 6.3 (3.2-14.4)", rotation angle = 0
  Source counts = 43.4 +/- 20.0
  Background counts = 355.4
  Rate = 0.0007 +/- 0.0003
[Mon Feb 13 23:40:06 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 23:40:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 23:40:06 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 23:40:06 2012] Source does appear to be extended
[Mon Feb 13 23:40:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 00:29:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 14 00:29:37 2012] Initial guess for spatial extent in simple fitting = 6.27"
[Tue Feb 14 00:29:37 2012] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.062
[Tue Feb 14 00:29:37 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 6.27"
[Tue Feb 14 00:44:57 2012] fullrun_mos2_xmm0602350101_pi300-10000_cl_pass1_src16.ximg exists
[Tue Feb 14 00:44:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602350101_pi300-10000_cl_pass1_src16.csv
[Tue Feb 14 00:44:57 2012] fullrun_mos2_xmm0602350101_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue Feb 14 00:44:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602350101_pi300-10000_cl_pass1_src16.csv
[Tue Feb 14 00:44:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602350101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602350101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 00:44:57 2012] fullrun_mos2_xmm0602350101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue Feb 14 00:44:57 2012] fullrun_mos2_xmm0602350101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Feb 14 00:44:57 2012] Fit fullrun_mos2_xmm0602350101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Tue Feb 14 00:45:06 2012] Warning, spatial fit 16 centroid is now closest to src. 3
[Tue Feb 14 00:45:06 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 00:45:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 00:45:06 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 00:45:06 2012] Source does appear to be extended
[Tue Feb 14 00:45:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 01:31:25 2012] XMMSAS src. selection expression = ellipse(25249.123620, 35651.464400, 376.095011, 376.095011, 0.000000, X, Y)
[Tue Feb 14 01:31:25 2012] Writing source region out to fullrun_mos2_xmm0602350101_pi300-10000_pass1_cl_src1_src.reg
[Tue Feb 14 01:31:25 2012] Extracting stamp from image fullrun_mos2_xmm0602350101_pi300-10000_cl_sm2.00.img.gz, (269, 389) - (312, 432)
[Tue Feb 14 01:31:25 2012] XMMSAS bgd. selection expression = annulus(25249.123620, 35651.464400, 626.825018, 1253.650036, X, Y)
[Tue Feb 14 01:31:25 2012] Writing fullrun_mos2_xmm0602350101_pi300-10000_pass1_cl_src1.gif
[Tue Feb 14 01:34:55 2012] Mean detx,y = (-1082.28, -11114.88) 
[Tue Feb 14 01:34:56 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 14 01:35:09 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 14 01:35:09 2012] Setting source spectrum file to fullrun_mos2_xmm0602350101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Feb 14 01:35:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602350101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Feb 14 01:46:51 2012] Not generating rmf since there are only 43 counts
[Tue Feb 14 01:46:51 2012] rmf not generated due to insufficient counts
[Tue Feb 14 01:48:21 2012] Updating aperture counts using extracted products
[Tue Feb 14 01:48:21 2012] Error reading totcts from fullrun_mos2_xmm0602350101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Feb 14 01:48:21 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 01:48:21 2012] Using photon index=1.80, rate=0.000747, arf fullrun_mos2_xmm0602350101_pi300-10000_pass1_cl_src1.arf
[Tue Feb 14 01:48:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 01:48:21 2012] Updating source flux to 1.5e-14
[Tue Feb 14 01:48:32 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting