[Mon Dec 26 03:14:44 2011] Detection parameters:
  Position = (130.3, 247.0) = 12 15 49.91 67 6 24.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1775.7 +/- 49.6
  Background counts = 13.2
  Rate = 0.1 +/- 0.004

[Mon Dec 26 03:14:46 2011] Off-axis axis estimate = 12.75'
[Mon Dec 26 03:19:53 2011] Using EEF radius (= 12.80 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 03:19:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 26 03:19:53 2011] Initial guess for spatial extent in simple fitting = 12.80"
[Mon Dec 26 03:19:53 2011] source mask rpix=2.9, npix_max = 47, mask sum = 38, frac = 0.801
[Mon Dec 26 03:19:53 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 12.80"
[Mon Dec 26 04:19:49 2011] fullrun_pn_xmm0602340701_pi300-10000_cl_pass0_src1.ximg exists
[Mon Dec 26 04:19:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602340701_pi300-10000_cl_pass0_src1.csv
[Mon Dec 26 04:19:49 2011] fullrun_pn_xmm0602340701_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Dec 26 04:19:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602340701_pi300-10000_cl_pass0_src1.csv
[Mon Dec 26 04:19:49 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602340701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602340701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 04:19:49 2011] fullrun_pn_xmm0602340701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Dec 26 04:19:49 2011] fullrun_pn_xmm0602340701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Dec 26 04:19:49 2011] Fit fullrun_pn_xmm0602340701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Dec 26 05:00:14 2011] Spatial fit model total counts = 1812.270000, observed total counts = 1832.000000
[Mon Dec 26 05:00:14 2011] Offset between fit and detection position for source 1 = 0.263937 pixels
[Mon Dec 26 05:00:14 2011] 1834.517000 total counts/ 409.117000 bgd. counts: snr = 70.471415
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.263937 pixels
  Position = (130.5, 246.8) = 12 15 49.77 67 6 23.5
  Extent = 7.6 (7.3-8.0)", rotation angle = 0
  Source counts = 1425.4 +/- 42.8
  Background counts = 409.1
  Rate = 0.2 +/- 0.006
[Mon Dec 26 05:00:14 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 05:00:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 05:00:14 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 05:00:14 2011] Source does appear to be extended
[Mon Dec 26 05:00:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 05:00:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 26 05:00:31 2011] Initial guess for spatial extent in simple fitting = 7.64"
[Mon Dec 26 05:00:31 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.982
[Mon Dec 26 05:00:31 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.64"
[Mon Dec 26 05:58:26 2011] fullrun_pn_xmm0602340701_pi300-10000_cl_pass1_src1.ximg exists
[Mon Dec 26 05:58:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602340701_pi300-10000_cl_pass1_src1.csv
[Mon Dec 26 05:58:26 2011] fullrun_pn_xmm0602340701_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Dec 26 05:58:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602340701_pi300-10000_cl_pass1_src1.csv
[Mon Dec 26 05:58:26 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602340701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602340701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 05:58:26 2011] fullrun_pn_xmm0602340701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Dec 26 05:58:26 2011] fullrun_pn_xmm0602340701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Dec 26 05:58:26 2011] Fit fullrun_pn_xmm0602340701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Dec 26 06:31:51 2011] Spatial fit model total counts = 1672.800000, observed total counts = 1696.000000
[Mon Dec 26 06:31:51 2011] Offset between fit and detection position for source 1 = 0.083317 pixels
[Mon Dec 26 06:31:51 2011] 1710.108000 total counts/ 432.588000 bgd. counts: snr = 61.422922
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.083317 pixels
  Position = (130.4, 246.8) = 12 15 49.82 67 6 23.7
  Extent = 6.8 (6.4-7.0)", rotation angle = 0
  Source counts = 1277.5 +/- 41.4
  Background counts = 432.6
  Rate = 0.2 +/- 0.005
[Mon Dec 26 06:31:51 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 06:31:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 06:31:51 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 06:31:51 2011] Source does appear to be extended
[Mon Dec 26 06:31:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 06:32:12 2011] Counts = 1277.520000, rescaling region sizes by 2.000000
[Mon Dec 26 06:32:12 2011] XMMSAS src. selection expression = ellipse(11295.457600, 21423.992420, 811.794663, 811.794663, 0.000000, X, Y)
[Mon Dec 26 06:32:12 2011] Writing source region out to fullrun_pn_xmm0602340701_pi300-10000_pass1_cl_src1_src.reg
[Mon Dec 26 06:32:12 2011] Extracting stamp from image fullrun_pn_xmm0602340701_pi300-10000_cl_sm2.00.img.gz, (84, 200) - (177, 293)
[Mon Dec 26 06:32:12 2011] XMMSAS bgd. selection expression = annulus(11295.457600, 21423.992420, 2705.982210, 5411.964419, X, Y) && !ellipse(13216.672867, 17580.269272, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 26 06:32:12 2011] Writing fullrun_pn_xmm0602340701_pi300-10000_pass1_cl_src1.gif
[Mon Dec 26 06:32:28 2011] Mean detx,y = (12214.57, 9008.49) 
[Mon Dec 26 06:32:34 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 06:34:53 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 06:34:54 2011] Setting source spectrum file to fullrun_pn_xmm0602340701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 26 06:34:54 2011] Setting bgd. spectrum file to fullrun_pn_xmm0602340701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Dec 26 07:54:04 2011] Updating aperture counts using extracted products
[Mon Dec 26 07:54:04 2011] Error reading totcts from fullrun_pn_xmm0602340701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 26 07:54:06 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 07:54:06 2011] Using photon index=1.80, rate=0.168, arf fullrun_pn_xmm0602340701_pi300-10000_pass1_cl_src1.arf
[Mon Dec 26 07:54:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 07:54:06 2011] Updating source flux to 1.2e-12
[Mon Dec 26 07:56:17 2011] Reading fit data from xmm0602340701/analysis//spectral/fullrun_pn_xmm0602340701_pi300-10000_pass1_cl_src1_pl.csv
[Mon Dec 26 07:56:17 2011] Spectral fit parameter nH value = 39877900000.0
[Mon Dec 26 07:56:17 2011] Spectral fit parameter PhoIndex value = 1.85566
[Mon Dec 26 07:56:17 2011] Failed to get F(0.3-8.0) from xmm0602340701/analysis//spectral/fullrun_pn_xmm0602340701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Dec 26 07:56:17 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 07:56:17 2011] Using Nh = 4e+10, photon index=1.86, rate=0.168, arf fullrun_pn_xmm0602340701_pi300-10000_pass1_cl_src1.arf
[Mon Dec 26 07:56:17 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 07:56:17 2011] Updating source flux to 1.1e-12