[Wed May 30 17:40:43 2012] Detection parameters:
  Position = (399.9, 256.0) = 11 5 55.47 52 27 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.6 +/- 13.4
  Background counts = 38.7
  Rate = 0.007 +/- 0.001

[Wed May 30 17:40:43 2012] Off-axis axis estimate = 7.97'
[Wed May 30 18:05:40 2012] Using EEF radius (= 10.42 ")to estimate initial spatial extent for simple fitting
[Wed May 30 18:05:40 2012] Initial guess for spatial extent in simple fitting = 10.42"
[Wed May 30 18:05:40 2012] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.045
[Wed May 30 18:05:40 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.42"
[Wed May 30 18:12:41 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_src2.ximg exists
[Wed May 30 18:12:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_src2.csv
[Wed May 30 18:12:41 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May 30 18:12:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_src2.csv
[Wed May 30 18:12:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 18:12:41 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May 30 18:12:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May 30 18:12:41 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May 30 18:12:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May 30 18:12:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 18:12:46 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 12.934125 pixels away
[Wed May 30 18:12:46 2012] Vigneting correction estimate = 1.000000
[Wed May 30 18:12:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 18:12:46 2012] Assessing source extent using major
[Wed May 30 18:12:46 2012] Source does appear to be extended
[Wed May 30 18:12:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 18:36:00 2012] Using EEF radius (= 10.42 ")to estimate initial spatial extent for simple fitting
[Wed May 30 18:36:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 18:36:00 2012] Initial guess for spatial extent in simple fitting = 10.42"
[Wed May 30 18:36:00 2012] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.045
[Wed May 30 18:36:00 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.42"
[Wed May 30 18:42:55 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_src2.ximg exists
[Wed May 30 18:42:55 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed May 30 18:42:55 2012] Fit fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_src2 appears to have run properly
[Wed May 30 18:42:55 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed May 30 18:42:55 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed May 30 18:42:55 2012] Fit fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed May 30 18:43:00 2012] Spatial fit model total counts = 117.799000, observed total counts = 112.000000
[Wed May 30 18:43:00 2012] Offset between fit and detection position for source 4 = 0.334156 pixels
[Wed May 30 18:43:00 2012] 119.062400 total counts/ 81.674000 bgd. counts: snr = 4.137090
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.334156 pixels
  Position = (399.7, 256.3) = 11 5 55.57 52 27 15.2
  Extent = 4.5 (3.5-6.2)", rotation angle = 0
  Source counts = 37.4 +/- 10.9
  Background counts = 81.7
  Rate = 0.002 +/- 0.0007
[Wed May 30 18:43:00 2012] Vigneting correction estimate = 1.000000
[Wed May 30 18:43:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 18:43:00 2012] Assessing source extent using major axis lower bound
[Wed May 30 18:43:00 2012] Source does appear to be extended
[Wed May 30 18:43:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 18:57:55 2012] XMMSAS src. selection expression = ellipse(34723.862600, 22245.684200, 268.533008, 268.533008, 0.000000, X, Y)
[Wed May 30 18:57:55 2012] Writing source region out to fullrun_mos2_xmm0602340401_pi300-10000_pass1_cl_src4_src.reg
[Wed May 30 18:57:55 2012] Extracting stamp from image fullrun_mos2_xmm0602340401_pi300-10000_cl_sm2.00.img.gz, (384, 241) - (415, 272)
[Wed May 30 18:57:55 2012] XMMSAS bgd. selection expression = annulus(34723.862600, 22245.684200, 447.555013, 895.110026, X, Y)
[Wed May 30 18:57:55 2012] Writing fullrun_mos2_xmm0602340401_pi300-10000_pass1_cl_src4.gif
[Wed May 30 18:58:09 2012] Mean detx,y = (7950.52, 5103.09) 
[Wed May 30 18:58:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 18:58:17 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 18:58:17 2012] Setting source spectrum file to fullrun_mos2_xmm0602340401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed May 30 18:58:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602340401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed May 30 19:02:30 2012] Not generating rmf since there are only 37 counts
[Wed May 30 19:02:30 2012] rmf not generated due to insufficient counts
[Wed May 30 19:03:22 2012] Updating aperture counts using extracted products
[Wed May 30 19:03:22 2012] Error reading totcts from fullrun_mos2_xmm0602340401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed May 30 19:03:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 19:03:22 2012] Using photon index=1.80, rate=0.00242, arf fullrun_mos2_xmm0602340401_pi300-10000_pass1_cl_src4.arf
[Wed May 30 19:03:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 19:03:22 2012] Updating source flux to 6.9e-14
[Wed May 30 19:03:29 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting