[Wed May 30 17:40:43 2012] Detection parameters:
  Position = (299.2, 259.1) = 11 6 43.37 52 27 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.0 +/- 14.4
  Background counts = 54.8
  Rate = 0.004 +/- 0.0007

[Wed May 30 17:40:43 2012] Off-axis axis estimate = 2.85'
[Wed May 30 18:05:40 2012] Using EEF radius (= 7.85 ")to estimate initial spatial extent for simple fitting
[Wed May 30 18:05:40 2012] Initial guess for spatial extent in simple fitting = 7.85"
[Wed May 30 18:05:40 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.941
[Wed May 30 18:05:40 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.85"
[Wed May 30 18:12:41 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 30 18:12:41 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 30 18:12:41 2012] Fit fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_src3 appears to have run properly
[Wed May 30 18:12:41 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 30 18:12:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 30 18:12:41 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 30 18:12:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 30 18:12:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 18:12:46 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.744470 pixels away
[Wed May 30 18:12:46 2012] Vigneting correction estimate = 1.000000
[Wed May 30 18:12:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 18:12:46 2012] Assessing source extent using major
[Wed May 30 18:12:46 2012] Source does appear to be extended
[Wed May 30 18:12:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 18:36:00 2012] Using EEF radius (= 7.85 ")to estimate initial spatial extent for simple fitting
[Wed May 30 18:36:00 2012] Initial guess for spatial extent in simple fitting = 7.85"
[Wed May 30 18:36:00 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.941
[Wed May 30 18:36:00 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.85"
[Wed May 30 18:42:55 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 30 18:42:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_src3.csv
[Wed May 30 18:42:55 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 30 18:42:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_src3.csv
[Wed May 30 18:42:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 18:42:55 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 30 18:42:55 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 30 18:42:55 2012] Fit fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed May 30 18:43:00 2012] Spatial fit model total counts = 135.566000, observed total counts = 127.000000
[Wed May 30 18:43:00 2012] Offset between fit and detection position for source 3 = 0.669882 pixels
[Wed May 30 18:43:00 2012] 128.102500 total counts/ 91.807200 bgd. counts: snr = 3.788018
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.669882 pixels
  Position = (299.7, 259.6) = 11 6 43.16 52 27 30.5
  Extent = 3.6 (2.8-4.8)", rotation angle = 0
  Source counts = 36.3 +/- 11.3
  Background counts = 91.8
  Rate = 0.002 +/- 0.0007
[Wed May 30 18:43:00 2012] Vigneting correction estimate = 1.000000
[Wed May 30 18:43:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 18:43:00 2012] Assessing source extent using major axis lower bound
[Wed May 30 18:43:00 2012] Source does appear to be extended
[Wed May 30 18:43:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 18:57:55 2012] XMMSAS src. selection expression = ellipse(26023.738000, 22538.919600, 216.119406, 216.119406, 0.000000, X, Y)
[Wed May 30 18:57:55 2012] Writing source region out to fullrun_mos2_xmm0602340401_pi300-10000_pass1_cl_src3_src.reg
[Wed May 30 18:57:55 2012] Extracting stamp from image fullrun_mos2_xmm0602340401_pi300-10000_cl_sm2.00.img.gz, (287, 247) - (312, 272)
[Wed May 30 18:57:55 2012] XMMSAS bgd. selection expression = annulus(26023.738000, 22538.919600, 360.199010, 720.398021, X, Y)
[Wed May 30 18:57:55 2012] Writing fullrun_mos2_xmm0602340401_pi300-10000_pass1_cl_src3.gif
[Wed May 30 18:58:19 2012] Mean detx,y = (13.88, 1545.21) 
[Wed May 30 18:58:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 18:58:25 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 18:58:25 2012] Setting source spectrum file to fullrun_mos2_xmm0602340401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 30 18:58:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602340401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed May 30 19:02:33 2012] Not generating rmf since there are only 36 counts
[Wed May 30 19:02:33 2012] rmf not generated due to insufficient counts
[Wed May 30 19:03:22 2012] Updating aperture counts using extracted products
[Wed May 30 19:03:22 2012] Error reading totcts from fullrun_mos2_xmm0602340401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 30 19:03:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 19:03:22 2012] Using photon index=1.80, rate=0.00235, arf fullrun_mos2_xmm0602340401_pi300-10000_pass1_cl_src3.arf
[Wed May 30 19:03:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 19:03:22 2012] Updating source flux to 3.2e-14
[Wed May 30 19:03:29 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting