[Wed May 30 17:40:43 2012] Detection parameters:
  Position = (208.8, 149.8) = 11 7 26.27 52 19 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 286.4 +/- 22.3
  Background counts = 43.9
  Rate = 0.01 +/- 0.001

[Wed May 30 17:40:43 2012] Off-axis axis estimate = 12.59'
[Wed May 30 18:05:40 2012] Using EEF radius (= 12.72 ")to estimate initial spatial extent for simple fitting
[Wed May 30 18:05:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 18:05:40 2012] Initial guess for spatial extent in simple fitting = 12.72"
[Wed May 30 18:05:40 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.045
[Wed May 30 18:05:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.72"
[Wed May 30 18:12:41 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 30 18:12:41 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 30 18:12:41 2012] Fit fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_src1 appears to have run properly
[Wed May 30 18:12:41 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 30 18:12:41 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 30 18:12:41 2012] Fit fullrun_mos2_xmm0602340401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May 30 18:12:46 2012] Spatial fit model total counts = 339.723000, observed total counts = 332.000000
[Wed May 30 18:12:46 2012] Offset between fit and detection position for source 1 = 0.196746 pixels
[Wed May 30 18:12:46 2012] 339.762000 total counts/ 190.252000 bgd. counts: snr = 10.839410
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.196746 pixels
  Position = (209.0, 149.7) = 11 7 26.18 52 19 32.0
  Extent = 5.0 (4.4-5.9)", rotation angle = 0
  Source counts = 149.5 +/- 18.4
  Background counts = 190.3
  Rate = 0.01 +/- 0.001
[Wed May 30 18:12:46 2012] Vigneting correction estimate = 1.000000
[Wed May 30 18:12:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 18:12:46 2012] Assessing source extent using major axis lower bound
[Wed May 30 18:12:46 2012] Source does appear to be extended
[Wed May 30 18:12:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 18:36:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 18:36:00 2012] Initial guess for spatial extent in simple fitting = 5.04"
[Wed May 30 18:36:00 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.091
[Wed May 30 18:36:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.04"
[Wed May 30 18:42:55 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 30 18:42:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_src1.csv
[Wed May 30 18:42:55 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 30 18:42:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_src1.csv
[Wed May 30 18:42:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 18:42:55 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 30 18:42:55 2012] fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 30 18:42:55 2012] Fit fullrun_mos2_xmm0602340401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May 30 18:43:00 2012] Spatial fit model total counts = 261.620000, observed total counts = 257.000000
[Wed May 30 18:43:00 2012] Offset between fit and detection position for source 1 = 0.034290 pixels
[Wed May 30 18:43:00 2012] 262.601000 total counts/ 121.008000 bgd. counts: snr = 12.871665
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.034290 pixels
  Position = (209.0, 149.7) = 11 7 26.19 52 19 32.0
  Extent = 4.7 (4.1-5.6)", rotation angle = 0
  Source counts = 141.6 +/- 16.2
  Background counts = 121.0
  Rate = 0.009 +/- 0.001
[Wed May 30 18:43:00 2012] Vigneting correction estimate = 1.000000
[Wed May 30 18:43:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 18:43:00 2012] Assessing source extent using major axis lower bound
[Wed May 30 18:43:00 2012] Source does appear to be extended
[Wed May 30 18:43:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 18:57:55 2012] XMMSAS src. selection expression = ellipse(18133.827592, 12979.110800, 282.774008, 282.774008, 0.000000, X, Y)
[Wed May 30 18:57:55 2012] Writing source region out to fullrun_mos2_xmm0602340401_pi300-10000_pass1_cl_src1_src.reg
[Wed May 30 18:57:55 2012] Extracting stamp from image fullrun_mos2_xmm0602340401_pi300-10000_cl_sm2.00.img.gz, (193, 133) - (225, 166)
[Wed May 30 18:57:55 2012] XMMSAS bgd. selection expression = annulus(18133.827592, 12979.110800, 471.290014, 942.580027, X, Y)
[Wed May 30 18:57:55 2012] Writing fullrun_mos2_xmm0602340401_pi300-10000_pass1_cl_src1.gif
[Wed May 30 18:57:57 2012] Mean detx,y = (-10913.75, 7392.06) 
[Wed May 30 18:57:58 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 18:58:07 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 18:58:07 2012] Setting source spectrum file to fullrun_mos2_xmm0602340401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 30 18:58:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602340401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 30 19:03:22 2012] Updating aperture counts using extracted products
[Wed May 30 19:03:22 2012] Error reading totcts from fullrun_mos2_xmm0602340401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 30 19:03:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 19:03:22 2012] Using photon index=1.80, rate=0.00918, arf fullrun_mos2_xmm0602340401_pi300-10000_pass1_cl_src1.arf
[Wed May 30 19:03:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 19:03:22 2012] Updating source flux to 2.9e-13
[Wed May 30 19:03:34 2012] Reading fit data from xmm0602340401/analysis//spectral/fullrun_mos2_xmm0602340401_pi300-10000_pass1_cl_src1_pl.csv
[Wed May 30 19:03:34 2012] Spectral fit parameter nH value = 1.30093e+13
[Wed May 30 19:03:34 2012] Spectral fit parameter PhoIndex value = 1.74221
[Wed May 30 19:03:34 2012] Failed to get F(0.3-8.0) from xmm0602340401/analysis//spectral/fullrun_mos2_xmm0602340401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed May 30 19:03:34 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 19:03:34 2012] Using Nh = 1.3e+13, photon index=1.74, rate=0.00918, arf fullrun_mos2_xmm0602340401_pi300-10000_pass1_cl_src1.arf
[Wed May 30 19:03:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 19:03:34 2012] Updating source flux to 3e-13