[Sat Feb 25 10:42:51 2012] Detection parameters:
  Position = (351.5, 279.1) = 10 32 8.02 53 19 36.6
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 172.3 +/- 25.2
  Background counts = 1070.9
  Rate = 0.01 +/- 0.002

[Sat Feb 25 10:42:51 2012] Off-axis axis estimate = 4.09'
[Sat Feb 25 11:06:24 2012] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 11:06:24 2012] Initial guess for spatial extent in simple fitting = 8.48"
[Sat Feb 25 11:06:24 2012] source mask rpix=1.9, npix_max = 23, mask sum = 19, frac = 0.792
[Sat Feb 25 11:06:24 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.48"
[Sat Feb 25 11:35:48 2012] fullrun_mos1_xmm0602340301_pi300-10000_cl_pass0_src5.ximg exists
[Sat Feb 25 11:35:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602340301_pi300-10000_cl_pass0_src5.csv
[Sat Feb 25 11:35:48 2012] fullrun_mos1_xmm0602340301_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Feb 25 11:35:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602340301_pi300-10000_cl_pass0_src5.csv
[Sat Feb 25 11:35:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602340301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602340301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 11:35:48 2012] fullrun_mos1_xmm0602340301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Feb 25 11:35:48 2012] fullrun_mos1_xmm0602340301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Feb 25 11:35:48 2012] Fit fullrun_mos1_xmm0602340301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Feb 25 15:17:13 2012] Source 10 is offset by -7.236345 and -3.170055 pixels which is larger than
2 X fitted extent = 0.974235 x 0.974235, not incorporating fit results
[Sat Feb 25 15:17:13 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 15:17:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 15:17:13 2012] Assessing source extent using major
[Sat Feb 25 15:17:13 2012] Source does appear to be extended
[Sat Feb 25 15:17:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 15:35:13 2012] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 15:35:13 2012] Initial guess for spatial extent in simple fitting = 8.48"
[Sat Feb 25 15:35:13 2012] source mask rpix=1.9, npix_max = 23, mask sum = 19, frac = 0.792
[Sat Feb 25 15:35:13 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 8.48"
[Sat Feb 25 16:03:55 2012] fullrun_mos1_xmm0602340301_pi300-10000_cl_pass1_src4.ximg exists
[Sat Feb 25 16:03:55 2012] fullrun_mos1_xmm0602340301_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Feb 25 16:03:55 2012] Fit fullrun_mos1_xmm0602340301_pi300-10000_cl_pass1_src4 appears to have run properly
[Sat Feb 25 16:03:55 2012] fullrun_mos1_xmm0602340301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Feb 25 16:03:55 2012] fullrun_mos1_xmm0602340301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Feb 25 16:03:55 2012] Fit fullrun_mos1_xmm0602340301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sat Feb 25 20:30:12 2012] Source 10 is offset by -7.293862 and -3.095729 pixels which is larger than
2 X fitted extent = 0.974235 x 0.974235, not incorporating fit results
[Sat Feb 25 20:30:12 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 20:30:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 20:30:12 2012] Assessing source extent using major
[Sat Feb 25 20:30:12 2012] Source does appear to be extended
[Sat Feb 25 20:30:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 20:37:49 2012] XMMSAS src. selection expression = ellipse(30532.000000, 24233.357178, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Feb 25 20:37:49 2012] Writing source region out to fullrun_mos1_xmm0602340301_pi300-10000_pass1_cl_src10_src.reg
[Sat Feb 25 20:37:49 2012] Extracting stamp from image fullrun_mos1_xmm0602340301_pi300-10000_cl_sm2.00.img.gz, (276, 204) - (426, 354)
[Sat Feb 25 20:37:49 2012] XMMSAS bgd. selection expression = annulus(30532.000000, 24233.357178, 2175.000000, 4350.000000, X, Y)
[Sat Feb 25 20:37:49 2012] Writing fullrun_mos1_xmm0602340301_pi300-10000_pass1_cl_src10.gif
[Sat Feb 25 20:40:01 2012] Mean detx,y = (-5621.33, 758.56) 
[Sat Feb 25 20:40:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 25 20:40:51 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 25 20:40:51 2012] Setting source spectrum file to fullrun_mos1_xmm0602340301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Feb 25 20:40:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602340301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Feb 25 20:48:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Feb 25 20:48:34 2012] rmf not generated due to insufficient counts
[Sat Feb 25 22:29:26 2012] Updating aperture counts using extracted products
[Sat Feb 25 22:29:26 2012] Error reading totcts from fullrun_mos1_xmm0602340301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Feb 25 22:29:27 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 22:29:27 2012] Using photon index=1.80, rate=0.0116, arf fullrun_mos1_xmm0602340301_pi300-10000_pass1_cl_src10.arf
[Sat Feb 25 22:29:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 25 22:29:27 2012] Updating source flux to 1.3e-13
[Sat Feb 25 22:29:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Feb 25 22:29:35 2012] xmm0602340301/analysis//spectral/fullrun_mos1_xmm0602340301_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete