[Thu Aug 16 08:09:42 2012] Detection parameters:
  Position = (144.3, 198.2) = 9 12 48.43 0 23 27.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 294.1 +/- 22.6
  Background counts = 30.1
  Rate = 0.01 +/- 0.0009

[Thu Aug 16 08:09:43 2012] Off-axis axis estimate = 13.33'
[Thu Aug 16 08:55:28 2012] Using EEF radius (= 13.09 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 08:55:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 16 08:55:28 2012] Initial guess for spatial extent in simple fitting = 13.09"
[Thu Aug 16 08:55:28 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.994
[Thu Aug 16 08:55:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.09"
[Thu Aug 16 09:28:51 2012] fullrun_mos2_xmm0602340201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug 16 09:28:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602340201_pi300-10000_cl_pass0_src1.csv
[Thu Aug 16 09:28:51 2012] fullrun_mos2_xmm0602340201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug 16 09:28:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602340201_pi300-10000_cl_pass0_src1.csv
[Thu Aug 16 09:28:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602340201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602340201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 09:28:51 2012] fullrun_mos2_xmm0602340201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug 16 09:28:51 2012] fullrun_mos2_xmm0602340201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug 16 09:28:51 2012] Fit fullrun_mos2_xmm0602340201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Aug 16 09:29:03 2012] Spatial fit model total counts = 456.553000, observed total counts = 435.000000
[Thu Aug 16 09:29:03 2012] Offset between fit and detection position for source 1 = 0.245029 pixels
[Thu Aug 16 09:29:03 2012] 403.023000 total counts/ 256.581000 bgd. counts: snr = 9.142257
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.245029 pixels
  Position = (144.5, 198.4) = 9 12 48.37 0 23 27.0
  Extent = 5.4 (4.7-6.4)", rotation angle = 0
  Source counts = 146.4 +/- 20.1
  Background counts = 256.6
  Rate = 0.007 +/- 0.001
[Thu Aug 16 09:29:03 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 09:29:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 09:29:03 2012] Assessing source extent using major axis lower bound
[Thu Aug 16 09:29:03 2012] Source does appear to be extended
[Thu Aug 16 09:29:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 09:29:03 2012] Source is confused with source 17
[Thu Aug 16 10:21:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 16 10:21:00 2012] Initial guess for spatial extent in simple fitting = 5.37"
[Thu Aug 16 10:21:00 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.748
[Thu Aug 16 10:21:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.37"
[Thu Aug 16 11:05:57 2012] fullrun_mos2_xmm0602340201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug 16 11:05:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602340201_pi300-10000_cl_pass1_src1.csv
[Thu Aug 16 11:05:57 2012] fullrun_mos2_xmm0602340201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug 16 11:05:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602340201_pi300-10000_cl_pass1_src1.csv
[Thu Aug 16 11:05:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602340201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602340201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 11:05:57 2012] fullrun_mos2_xmm0602340201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug 16 11:05:57 2012] fullrun_mos2_xmm0602340201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug 16 11:05:57 2012] Fit fullrun_mos2_xmm0602340201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug 16 11:06:16 2012] Spatial fit model total counts = 315.162000, observed total counts = 309.000000
[Thu Aug 16 11:06:16 2012] Offset between fit and detection position for source 1 = 0.024084 pixels
[Thu Aug 16 11:06:16 2012] 251.025000 total counts/ 109.568000 bgd. counts: snr = 13.513958
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.024084 pixels
  Position = (144.5, 198.4) = 9 12 48.38 0 23 27.1
  Extent = 5.2 (4.5-6.2)", rotation angle = 0
  Source counts = 141.5 +/- 15.8
  Background counts = 109.6
  Rate = 0.007 +/- 0.0008
[Thu Aug 16 11:06:16 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 11:06:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 11:06:16 2012] Assessing source extent using major axis lower bound
[Thu Aug 16 11:06:16 2012] Source does appear to be extended
[Thu Aug 16 11:06:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 11:55:44 2012] XMMSAS src. selection expression = ellipse(12524.586400, 17209.790800, 311.044809, 311.044809, 0.000000, X, Y)
[Thu Aug 16 11:55:44 2012] Writing source region out to fullrun_mos2_xmm0602340201_pi300-10000_pass1_cl_src1_src.reg
[Thu Aug 16 11:55:44 2012] Extracting stamp from image fullrun_mos2_xmm0602340201_pi300-10000_cl_sm2.00.img.gz, (127, 180) - (162, 216)
[Thu Aug 16 11:55:44 2012] XMMSAS bgd. selection expression = annulus(12524.586400, 17209.790800, 518.408015, 1036.816030, X, Y) && !ellipse(12000.880524, 17185.196930, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 16 11:55:44 2012] Writing fullrun_mos2_xmm0602340201_pi300-10000_pass1_cl_src1.gif
[Thu Aug 16 11:55:46 2012] Mean detx,y = (-14512.88, 1315.34) 
[Thu Aug 16 11:55:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 11:55:54 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 11:55:54 2012] Setting source spectrum file to fullrun_mos2_xmm0602340201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug 16 11:55:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602340201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Aug 16 12:13:34 2012] Updating aperture counts using extracted products
[Thu Aug 16 12:13:34 2012] Error reading totcts from fullrun_mos2_xmm0602340201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug 16 12:13:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 12:13:35 2012] Using photon index=1.80, rate=0.00689, arf fullrun_mos2_xmm0602340201_pi300-10000_pass1_cl_src1.arf
[Thu Aug 16 12:13:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 12:13:35 2012] Updating source flux to 2e-13
[Thu Aug 16 12:13:43 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Aug 16 12:13:59 2012] Reading fit data from xmm0602340201/analysis//spectral/fullrun_mos2_xmm0602340201_pi300-10000_pass1_cl_src1_pl.csv
[Thu Aug 16 12:13:59 2012] Spectral fit parameter nH value = 3.40032e+21
[Thu Aug 16 12:13:59 2012] Spectral fit parameter PhoIndex value = 1.68703
[Thu Aug 16 12:13:59 2012] Failed to get F(0.3-8.0) from xmm0602340201/analysis//spectral/fullrun_mos2_xmm0602340201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Aug 16 12:13:59 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 12:13:59 2012] Using Nh = 3.4e+21, photon index=1.69, rate=0.00689, arf fullrun_mos2_xmm0602340201_pi300-10000_pass1_cl_src1.arf
[Thu Aug 16 12:13:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 12:13:59 2012] Updating source flux to 2.8e-13