[Thu Aug 16 08:09:20 2012] Detection parameters:
  Position = (144.6, 198.0) = 9 12 48.35 0 23 25.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 338.2 +/- 23.9
  Background counts = 38.6
  Rate = 0.01 +/- 0.0009

[Thu Aug 16 08:09:20 2012] Off-axis axis estimate = 13.32'
[Thu Aug 16 08:39:42 2012] Using EEF radius (= 13.09 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 08:39:42 2012] Initial guess for spatial extent in simple fitting = 13.09"
[Thu Aug 16 08:39:42 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.995
[Thu Aug 16 08:39:42 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.09"
[Thu Aug 16 08:55:28 2012] fullrun_mos1_xmm0602340201_pi300-10000_cl_pass0_src3.ximg exists
[Thu Aug 16 08:55:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602340201_pi300-10000_cl_pass0_src3.csv
[Thu Aug 16 08:55:28 2012] fullrun_mos1_xmm0602340201_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Aug 16 08:55:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602340201_pi300-10000_cl_pass0_src3.csv
[Thu Aug 16 08:55:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602340201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602340201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 08:55:28 2012] fullrun_mos1_xmm0602340201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Aug 16 08:55:28 2012] fullrun_mos1_xmm0602340201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Aug 16 08:55:28 2012] Fit fullrun_mos1_xmm0602340201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Aug 16 09:28:59 2012] Spatial fit model total counts = 430.138000, observed total counts = 428.000000
[Thu Aug 16 09:28:59 2012] Offset between fit and detection position for source 10 = 0.117039 pixels
[Thu Aug 16 09:28:59 2012] 431.477000 total counts/ 268.304000 bgd. counts: snr = 9.961729
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.117039 pixels
  Position = (144.7, 198.0) = 9 12 48.32 0 23 25.7
  Extent = 5.1 (4.3-6.3)", rotation angle = 0
  Source counts = 163.2 +/- 20.8
  Background counts = 268.3
  Rate = 0.008 +/- 0.001
[Thu Aug 16 09:28:59 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 09:28:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 09:28:59 2012] Assessing source extent using major axis lower bound
[Thu Aug 16 09:28:59 2012] Source does appear to be extended
[Thu Aug 16 09:28:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 09:57:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 16 09:57:22 2012] Initial guess for spatial extent in simple fitting = 5.08"
[Thu Aug 16 09:57:22 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.080
[Thu Aug 16 09:57:22 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.08"
[Thu Aug 16 10:20:59 2012] fullrun_mos1_xmm0602340201_pi300-10000_cl_pass1_src3.ximg exists
[Thu Aug 16 10:20:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602340201_pi300-10000_cl_pass1_src3.csv
[Thu Aug 16 10:20:59 2012] fullrun_mos1_xmm0602340201_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Aug 16 10:20:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602340201_pi300-10000_cl_pass1_src3.csv
[Thu Aug 16 10:20:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602340201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602340201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 10:20:59 2012] fullrun_mos1_xmm0602340201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Aug 16 10:20:59 2012] fullrun_mos1_xmm0602340201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Aug 16 10:20:59 2012] Fit fullrun_mos1_xmm0602340201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Aug 16 11:06:11 2012] Spatial fit model total counts = 387.812000, observed total counts = 386.000000
[Thu Aug 16 11:06:11 2012] Offset between fit and detection position for source 10 = 0.037777 pixels
[Thu Aug 16 11:06:11 2012] 386.498000 total counts/ 229.370000 bgd. counts: snr = 10.374932
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.037777 pixels
  Position = (144.7, 198.1) = 9 12 48.33 0 23 25.8
  Extent = 4.9 (4.1-6.0)", rotation angle = 0
  Source counts = 157.1 +/- 19.7
  Background counts = 229.4
  Rate = 0.008 +/- 0.001
[Thu Aug 16 11:06:11 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 11:06:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 11:06:11 2012] Assessing source extent using major axis lower bound
[Thu Aug 16 11:06:11 2012] Source does appear to be extended
[Thu Aug 16 11:06:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 11:46:00 2012] XMMSAS src. selection expression = ellipse(12539.007600, 17184.056000, 291.079208, 291.079208, 0.000000, X, Y)
[Thu Aug 16 11:46:00 2012] Writing source region out to fullrun_mos1_xmm0602340201_pi300-10000_pass1_cl_src10_src.reg
[Thu Aug 16 11:46:00 2012] Extracting stamp from image fullrun_mos1_xmm0602340201_pi300-10000_cl_sm2.00.img.gz, (128, 181) - (161, 215)
[Thu Aug 16 11:46:00 2012] XMMSAS bgd. selection expression = annulus(12539.007600, 17184.056000, 485.132014, 970.264028, X, Y)
[Thu Aug 16 11:46:00 2012] Writing fullrun_mos1_xmm0602340201_pi300-10000_pass1_cl_src10.gif
[Thu Aug 16 11:46:40 2012] Mean detx,y = (1500.52, 14342.52) 
[Thu Aug 16 11:46:41 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 11:46:47 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 11:46:47 2012] Setting source spectrum file to fullrun_mos1_xmm0602340201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Aug 16 11:46:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602340201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Aug 16 12:13:34 2012] Updating aperture counts using extracted products
[Thu Aug 16 12:13:34 2012] Error reading totcts from fullrun_mos1_xmm0602340201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Aug 16 12:13:34 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 12:13:34 2012] Using photon index=1.80, rate=0.00777, arf fullrun_mos1_xmm0602340201_pi300-10000_pass1_cl_src10.arf
[Thu Aug 16 12:13:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 12:13:34 2012] Updating source flux to 2.2e-13
[Thu Aug 16 12:13:43 2012] Reading fit data from xmm0602340201/analysis//spectral/fullrun_mos1_xmm0602340201_pi300-10000_pass1_cl_src10_pl.csv
[Thu Aug 16 12:13:43 2012] Spectral fit parameter nH value = 1.9387e+21
[Thu Aug 16 12:13:43 2012] Spectral fit parameter PhoIndex value = 1.43186
[Thu Aug 16 12:13:43 2012] Failed to get F(0.3-8.0) from xmm0602340201/analysis//spectral/fullrun_mos1_xmm0602340201_pi300-10000_pass1_cl_src10_pl.csv, possibly due to different flux energy range selected
[Thu Aug 16 12:13:43 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 12:13:43 2012] Using Nh = 1.9e+21, photon index=1.43, rate=0.00777, arf fullrun_mos1_xmm0602340201_pi300-10000_pass1_cl_src10.arf
[Thu Aug 16 12:13:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 12:13:43 2012] Updating source flux to 3.1e-13