[Sat Feb 18 04:20:28 2012] Detection parameters: Position = (372.2, 270.9) = 21 44 7.70 38 18 32.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 541.2 +/- 49.0 Background counts = 813.6 Rate = 0.01 +/- 0.0009 [Sat Feb 18 04:20:30 2012] Off-axis axis estimate = 5.71' [Sat Feb 18 11:24:55 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting [Sat Feb 18 11:24:55 2012] Initial guess for spatial extent in simple fitting = 9.28" [Sat Feb 18 11:24:55 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.081 [Sat Feb 18 11:24:55 2012] Giving source the simple spatial ID 64 for pass 0, mean size = 9.28" [Sat Feb 18 22:35:49 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src64.ximg exists [Sat Feb 18 22:35:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src64.csv [Sat Feb 18 22:35:49 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src64_1.ximg exists [Sat Feb 18 22:35:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src64.csv [Sat Feb 18 22:35:49 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src64_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Feb 18 22:35:51 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src64.ximg exists [Sat Feb 18 22:35:52 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists [Sat Feb 18 22:35:52 2012] Fit fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src64 appears to have run properly [Sat Feb 18 22:36:37 2012] Warning, spatial fit 64 centroid is now closest to src. 89 [Sat Feb 18 22:36:37 2012] Spatial fit model total counts = 11631.800000, observed total counts = 11628.000000 [Sat Feb 18 22:36:37 2012] Offset between fit and detection position for source 87 = 0.832934 pixels [Sat Feb 18 22:36:37 2012] Warning, changing simple spatial fit ID from 64 to 88 [Sat Feb 18 22:36:37 2012] 11308.763000 total counts/ 11207.800000 bgd. counts: snr = 0.953679 Spatial fit parameters: Offset between fit and detection position for source 87 = 0.832934 pixels Position = (372.6, 271.6) = 21 44 7.54 38 18 34.4 Extent = 4.6 (2.3-7.3)", rotation angle = 0 Source counts = 101.0 +/- 106.3 Background counts = 11207.8 Rate = 0.001 +/- 0.001 Deleting source due to low Poisson probability