[Sat Feb 18 04:20:27 2012] Detection parameters:
  Position = (200.4, 329.8) = 21 45 11.22 38 22 44.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 586.7 +/- 51.0
  Background counts = 846.0
  Rate = 0.01 +/- 0.001

[Sat Feb 18 04:20:30 2012] Off-axis axis estimate = 7.46'
[Sat Feb 18 11:24:55 2012] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 11:24:55 2012] Initial guess for spatial extent in simple fitting = 10.16"
[Sat Feb 18 11:24:55 2012] source mask rpix=2.3, npix_max = 32, mask sum = 22, frac = 0.684
[Sat Feb 18 11:24:55 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 10.16"
[Sat Feb 18 22:35:49 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src56.ximg exists
[Sat Feb 18 22:35:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src56.csv
[Sat Feb 18 22:35:49 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src56_1.ximg exists
[Sat Feb 18 22:35:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src56.csv
[Sat Feb 18 22:35:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 22:35:51 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Sat Feb 18 22:35:51 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Sat Feb 18 22:35:51 2012] Fit fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src56 appears to have run properly
[Sat Feb 18 22:36:36 2012] Spatial fit model total counts = 12931.300000, observed total counts = 12919.000000
[Sat Feb 18 22:36:36 2012] Offset between fit and detection position for source 58 = 3.490756 pixels
[Sat Feb 18 22:36:36 2012] Warning, changing simple spatial fit ID from 56 to 23
[Sat Feb 18 22:36:36 2012] 12446.282000 total counts/ 12222.400000 bgd. counts: snr = 2.025074
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 3.490756 pixels
  Position = (198.7, 332.8) = 21 45 11.86 38 23 0.6
  Extent = 7.2 (4.8-10.4)", rotation angle = 0
  Source counts = 223.9 +/- 111.6
  Background counts = 12222.4
  Rate = 0.003 +/- 0.001
[Sat Feb 18 22:36:37 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 22:36:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 22:36:37 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 22:36:37 2012] Source does appear to be extended
[Sat Feb 18 22:36:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 22:36:37 2012] Source is confused with source 57
[Sun Feb 19 09:16:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 19 09:16:21 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Sun Feb 19 09:16:21 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Sun Feb 19 09:16:21 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 7.24"
[Mon Feb 20 05:33:52 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_src56.ximg exists
[Mon Feb 20 05:33:52 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_src56_1.ximg exists
[Mon Feb 20 05:33:52 2012] Fit fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_src56 appears to have run properly
[Mon Feb 20 05:33:55 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Mon Feb 20 05:33:55 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Mon Feb 20 05:33:55 2012] Fit fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_tfrozen_src56 appears to have run properly
[Mon Feb 20 05:34:39 2012] Warning, spatial fit 56 centroid is now closest to src. 57
[Mon Feb 20 05:34:40 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 05:34:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 05:34:40 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 05:34:40 2012] Source does appear to be extended
[Mon Feb 20 05:34:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 10:40:25 2012] XMMSAS src. selection expression = ellipse(17240.996000, 28906.954000, 434.500213, 434.500213, 0.000000, X, Y)
[Mon Feb 20 10:40:25 2012] Writing source region out to fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src58_src.reg
[Mon Feb 20 10:40:25 2012] Extracting stamp from image fullrun_mos2_xmm0602310101_pi300-10000_cl_sm2.00.img.gz, (174, 308) - (224, 358)
[Mon Feb 20 10:40:25 2012] XMMSAS bgd. selection expression = annulus(17240.996000, 28906.954000, 724.167021, 1448.334042, X, Y) && !ellipse(16603.044000, 29279.032000, 1158.664033, 655.656019, 221.228000, X, Y) && !ellipse(17632.080000, 27868.942000, 1227.520035, 1227.520035, 0.000000, X, Y) && !ellipse(17917.947200, 27736.018000, 1575.280045, 1575.280045, 0.000000, X, Y) && !ellipse(18335.040000, 29039.886000, 834.992024, 834.992024, 0.000000, X, Y) && !ellipse(17786.890200, 26780.630000, 938.032027, 938.032027, 0.000000, X, Y) && !ellipse(18303.702200, 29689.896000, 1599.400046, 1599.400046, 0.000000, X, Y) && !ellipse(16066.382187, 26727.104065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16850.084442, 27892.611481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17188.082947, 30122.982117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18041.382760, 31828.200000, 1707.696049, 1707.696049, 0.000000, X, Y)
[Mon Feb 20 10:40:25 2012] Writing fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src58.gif
[Mon Feb 20 14:11:16 2012] Mean detx,y = (-7917.14, -2791.84) 
[Mon Feb 20 14:11:18 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 14:11:28 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 14:11:29 2012] Setting source spectrum file to fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Mon Feb 20 14:11:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Mon Feb 20 23:31:40 2012] Updating aperture counts using extracted products
[Mon Feb 20 23:31:40 2012] Error reading totcts from fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Mon Feb 20 23:31:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 23:31:50 2012] Using photon index=1.80, rate=0.00265, arf fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src58.arf
[Mon Feb 20 23:31:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 23:31:51 2012] Updating source flux to 4e-14
[Mon Feb 20 23:42:31 2012] Flag c found in src. 58 procflags, skipping spectral fitting