[Sat Feb 18 04:20:29 2012] Detection parameters:
  Position = (252.4, 192.5) = 21 44 51.97 38 13 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 507.7 +/- 38.1
  Background counts = 620.2
  Rate = 0.006 +/- 0.0004

[Sat Feb 18 04:20:30 2012] Off-axis axis estimate = 8.38'
[Sat Feb 18 11:24:55 2012] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 11:24:55 2012] Initial guess for spatial extent in simple fitting = 10.62"
[Sat Feb 18 11:24:55 2012] source mask rpix=2.4, npix_max = 34, mask sum = 28, frac = 0.809
[Sat Feb 18 11:24:55 2012] Giving source the simple spatial ID 93 for pass 0, mean size = 10.62"
[Sat Feb 18 22:35:50 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src93.ximg exists
[Sat Feb 18 22:35:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src93.csv
[Sat Feb 18 22:35:50 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src93_1.ximg exists
[Sat Feb 18 22:35:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src93.csv
[Sat Feb 18 22:35:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 22:35:52 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src93.ximg exists
[Sat Feb 18 22:35:52 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists
[Sat Feb 18 22:35:52 2012] Fit fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src93 appears to have run properly
[Sat Feb 18 22:36:37 2012] Spatial fit model total counts = 8383.660000, observed total counts = 8384.000000
[Sat Feb 18 22:36:37 2012] Offset between fit and detection position for source 145 = 9.574915 pixels
[Sat Feb 18 22:36:37 2012] 8263.788000 total counts/ 7593.250000 bgd. counts: snr = 7.695016
Spatial fit parameters:
  Offset between fit and detection position for source 145 = 9.574915 pixels
  Position = (256.6, 183.9) = 21 44 50.40 38 12 13.0
  Extent = 21.2 (21.2-42.5)", rotation angle = 0
  Source counts = 670.5 +/- 90.9
  Background counts = 7593.2
  Rate = 0.008 +/- 0.001
[Sat Feb 18 22:36:37 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 22:36:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 22:36:37 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 22:36:37 2012] Source does appear to be extended
[Sat Feb 18 22:36:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 22:36:37 2012] Source is confused with source 156
[Sun Feb 19 09:16:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 19 09:16:21 2012] Initial guess for spatial extent in simple fitting = 21.24"
[Sun Feb 19 09:16:21 2012] source mask rpix=4.9, npix_max = 115, mask sum = 105, frac = 0.906
[Sun Feb 19 09:16:21 2012] Giving source the simple spatial ID 91 for pass 1, mean size = 21.24"
[Mon Feb 20 05:33:53 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_src91.ximg exists
[Mon Feb 20 05:33:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_src91.csv
[Mon Feb 20 05:33:53 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_src91_1.ximg exists
[Mon Feb 20 05:33:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_src91.csv
[Mon Feb 20 05:33:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 05:33:56 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_tfrozen_src91.ximg exists
[Mon Feb 20 05:33:56 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_tfrozen_src91_1.ximg exists
[Mon Feb 20 05:33:56 2012] Fit fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_tfrozen_src91 appears to have run properly
[Mon Feb 20 05:34:40 2012] Warning, spatial fit 91 centroid is now closest to src. 149
[Mon Feb 20 05:34:40 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 05:34:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 05:34:40 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 05:34:40 2012] Source does appear to be extended
[Mon Feb 20 05:34:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 10:40:33 2012] XMMSAS src. selection expression = ellipse(22278.018000, 15948.962000, 1274.112037, 1274.112037, 0.000000, X, Y)
[Mon Feb 20 10:40:33 2012] Writing source region out to fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src145_src.reg
[Mon Feb 20 10:40:33 2012] Extracting stamp from image fullrun_mos2_xmm0602310101_pi300-10000_cl_sm2.00.img.gz, (183, 111) - (330, 257)
[Mon Feb 20 10:40:33 2012] XMMSAS bgd. selection expression = annulus(22278.018000, 15948.962000, 2123.520061, 4247.040122, X, Y) && !ellipse(23273.004000, 17766.629600, 1038.088030, 1038.088030, 0.000000, X, Y) && !ellipse(22932.993200, 16285.075200, 1711.720049, 1711.720049, 0.000000, X, Y) && !ellipse(23110.083313, 17091.065521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21738.994000, 10376.958000, 6034.728174, 6034.728174, 0.000000, X, Y) && !ellipse(22524.792000, 14710.296000, 1192.976034, 1192.976034, 0.000000, X, Y) && !ellipse(22790.961000, 15720.314000, 3423.440099, 822.552024, 105.306700, X, Y) && !ellipse(22148.162216, 12916.537735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22342.534000, 13272.364000, 1479.112043, 1479.112043, 0.000000, X, Y) && !ellipse(20788.364000, 18246.678800, 1637.248047, 1637.248047, 0.000000, X, Y) && !ellipse(22780.036621, 17186.507187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20078.901413, 18337.526108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25525.519900, 17358.294000, 590.666417, 590.666417, 0.000000, X, Y) && !ellipse(21918.630353, 18043.051266, 1619.872047, 673.260931, 24.221121, X, Y) && !ellipse(22853.591553, 17729.938583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24758.760925, 16787.448318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20709.286000, 18200.920000, 317.196009, 317.196009, 0.000000, X, Y) && !ellipse(21497.615400, 17372.664000, 747.576022, 747.576022, 0.000000, X, Y) && !ellipse(20364.289185, 17476.067337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25773.236000, 17328.761200, 1181.336034, 1181.336034, 0.000000, X, Y) && !ellipse(18149.101334, 18779.503525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19705.826000, 17902.882000, 860.880025, 860.880025, 0.000000, X, Y) && !ellipse(24233.054000, 17234.702000, 1094.784032, 1094.784032, 0.000000, X, Y) && !ellipse(24003.604218, 16323.394333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19758.752000, 17829.902000, 757.300822, 401.527212, 129.048000, X, Y) && !ellipse(21109.611664, 17633.195953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17272.681800, 19133.452000, 811.944023, 811.944023, 0.000000, X, Y) && !ellipse(17481.137115, 18339.992630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19978.267838, 16823.721329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21110.258163, 16874.667358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18933.178000, 16725.770000, 1755.152051, 1755.152051, 0.000000, X, Y) && !ellipse(26159.899536, 10987.146530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20803.520000, 16779.152000, 1374.744040, 1374.744040, 0.000000, X, Y) && !ellipse(19494.500259, 18448.952377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18084.144714, 18145.197113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21398.085907, 15540.888168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23595.186371, 15159.316650, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 20 10:40:33 2012] Writing fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src145.gif
[Mon Feb 20 15:57:35 2012] Mean detx,y = (-167.48, 8864.28) 
[Mon Feb 20 15:57:38 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 15:58:06 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 15:58:07 2012] Setting source spectrum file to fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src145_src_b10.pi.gz
[Mon Feb 20 15:58:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src145_bgd.pi.gz
[Mon Feb 20 23:31:42 2012] Updating aperture counts using extracted products
[Mon Feb 20 23:31:42 2012] Error reading totcts from fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src145_src_b10.pi.gz
[Mon Feb 20 23:31:53 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 23:31:53 2012] Using photon index=1.80, rate=0.00794, arf fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src145.arf
[Mon Feb 20 23:31:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 23:31:53 2012] Updating source flux to 1.2e-13
[Mon Feb 20 23:42:31 2012] Flag c found in src. 145 procflags, skipping spectral fitting