[Sat Feb 18 04:20:29 2012] Detection parameters:
  Position = (243.2, 203.2) = 21 44 55.36 38 13 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 300.3 +/- 32.6
  Background counts = 617.5
  Rate = 0.007 +/- 0.0007

[Sat Feb 18 04:20:30 2012] Off-axis axis estimate = 7.98'
[Sat Feb 18 11:24:55 2012] Using EEF radius (= 10.42 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 11:24:55 2012] Initial guess for spatial extent in simple fitting = 10.42"
[Sat Feb 18 11:24:55 2012] source mask rpix=2.4, npix_max = 33, mask sum = 33, frac = 0.984
[Sat Feb 18 11:24:55 2012] Giving source the simple spatial ID 85 for pass 0, mean size = 10.42"
[Sat Feb 18 22:35:49 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src85.ximg exists
[Sat Feb 18 22:35:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src85.csv
[Sat Feb 18 22:35:49 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src85_1.ximg exists
[Sat Feb 18 22:35:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src85.csv
[Sat Feb 18 22:35:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 22:35:52 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Sat Feb 18 22:35:52 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Sat Feb 18 22:35:52 2012] Fit fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly
[Sat Feb 18 22:36:37 2012] Warning, spatial fit 85 centroid is now closest to src. 128
[Sat Feb 18 22:36:37 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 22:36:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 22:36:37 2012] Assessing source extent using major
[Sat Feb 18 22:36:37 2012] Source does appear to be extended
[Sat Feb 18 22:36:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 22:36:37 2012] Source is confused with source 124
[Sun Feb 19 09:16:21 2012] Using EEF radius (= 10.42 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 09:16:21 2012] Initial guess for spatial extent in simple fitting = 10.42"
[Sun Feb 19 09:16:21 2012] source mask rpix=2.4, npix_max = 33, mask sum = 33, frac = 0.984
[Sun Feb 19 09:16:21 2012] Giving source the simple spatial ID 84 for pass 1, mean size = 10.42"
[Mon Feb 20 05:33:53 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_src84.ximg exists
[Mon Feb 20 05:33:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_src84.csv
[Mon Feb 20 05:33:53 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_src84_1.ximg exists
[Mon Feb 20 05:33:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_src84.csv
[Mon Feb 20 05:33:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_src84_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 05:33:56 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_tfrozen_src84.ximg exists
[Mon Feb 20 05:33:56 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_tfrozen_src84_1.ximg exists
[Mon Feb 20 05:33:56 2012] Fit fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_tfrozen_src84 appears to have run properly
[Mon Feb 20 05:34:40 2012] Warning, spatial fit 84 centroid is now closest to src. 121
[Mon Feb 20 05:34:40 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 05:34:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 05:34:40 2012] Assessing source extent using major
[Mon Feb 20 05:34:40 2012] Source does appear to be extended
[Mon Feb 20 05:34:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 10:40:31 2012] XMMSAS src. selection expression = ellipse(21109.611664, 17633.195953, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 20 10:40:31 2012] Writing source region out to fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src131_src.reg
[Mon Feb 20 10:40:31 2012] Extracting stamp from image fullrun_mos2_xmm0602310101_pi300-10000_cl_sm2.00.img.gz, (206, 166) - (281, 241)
[Mon Feb 20 10:40:31 2012] XMMSAS bgd. selection expression = annulus(21109.611664, 17633.195953, 1087.500000, 2175.000000, X, Y) && !ellipse(23273.004000, 17766.629600, 1038.088030, 1038.088030, 0.000000, X, Y) && !ellipse(22932.993200, 16285.075200, 1711.720049, 1711.720049, 0.000000, X, Y) && !ellipse(23110.083313, 17091.065521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21738.994000, 10376.958000, 6034.728174, 6034.728174, 0.000000, X, Y) && !ellipse(22524.792000, 14710.296000, 1192.976034, 1192.976034, 0.000000, X, Y) && !ellipse(22790.961000, 15720.314000, 3423.440099, 822.552024, 105.306700, X, Y) && !ellipse(20788.364000, 18246.678800, 1637.248047, 1637.248047, 0.000000, X, Y) && !ellipse(22780.036621, 17186.507187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20078.901413, 18337.526108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21918.630353, 18043.051266, 1619.872047, 673.260931, 24.221121, X, Y) && !ellipse(22853.591553, 17729.938583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20709.286000, 18200.920000, 317.196009, 317.196009, 0.000000, X, Y) && !ellipse(21497.615400, 17372.664000, 747.576022, 747.576022, 0.000000, X, Y) && !ellipse(20364.289185, 17476.067337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18149.101334, 18779.503525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19705.826000, 17902.882000, 860.880025, 860.880025, 0.000000, X, Y) && !ellipse(24233.054000, 17234.702000, 1094.784032, 1094.784032, 0.000000, X, Y) && !ellipse(24003.604218, 16323.394333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19758.752000, 17829.902000, 757.300822, 401.527212, 129.048000, X, Y) && !ellipse(22278.018000, 15948.962000, 1698.816049, 1698.816049, 0.000000, X, Y) && !ellipse(19978.267838, 16823.721329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21110.258163, 16874.667358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18933.178000, 16725.770000, 1755.152051, 1755.152051, 0.000000, X, Y) && !ellipse(20803.520000, 16779.152000, 1374.744040, 1374.744040, 0.000000, X, Y) && !ellipse(19494.500259, 18448.952377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18084.144714, 18145.197113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21398.085907, 15540.888168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23595.186371, 15159.316650, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 20 10:40:31 2012] Writing fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src131.gif
[Mon Feb 20 15:39:47 2012] Mean detx,y = (-1846.82, 7428.38) 
[Mon Feb 20 15:39:49 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 15:40:04 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 15:40:04 2012] Setting source spectrum file to fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src131_src_b10.pi.gz
[Mon Feb 20 15:40:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src131_bgd.pi.gz
[Mon Feb 20 22:11:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 20 22:11:53 2012] rmf not generated due to insufficient counts
[Mon Feb 20 23:31:42 2012] Updating aperture counts using extracted products
[Mon Feb 20 23:31:42 2012] Error reading totcts from fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src131_src_b10.pi.gz
[Mon Feb 20 23:31:53 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 23:31:53 2012] Using photon index=1.80, rate=0.00672, arf fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src131.arf
[Mon Feb 20 23:31:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 23:31:53 2012] Updating source flux to 1.1e-13
[Mon Feb 20 23:42:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting