[Sat Feb 18 04:20:29 2012] Detection parameters:
  Position = (263.2, 204.3) = 21 44 47.96 38 13 34.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1383.1 +/- 59.8
  Background counts = 598.6
  Rate = 0.02 +/- 0.0007

[Sat Feb 18 04:20:30 2012] Off-axis axis estimate = 7.28'
[Sat Feb 18 11:24:55 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 11:24:55 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Sat Feb 18 11:24:55 2012] source mask rpix=2.3, npix_max = 31, mask sum = 23, frac = 0.726
[Sat Feb 18 11:24:55 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 10.07"
[Sat Feb 18 22:35:48 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src36.ximg exists
[Sat Feb 18 22:35:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src36.csv
[Sat Feb 18 22:35:48 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src36_1.ximg exists
[Sat Feb 18 22:35:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src36.csv
[Sat Feb 18 22:35:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 22:35:51 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Sat Feb 18 22:35:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Sat Feb 18 22:35:51 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Sat Feb 18 22:35:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Sat Feb 18 22:35:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 22:36:37 2012] Warning, spatial fit 36 centroid is now closest to src. 144
[Sat Feb 18 22:36:37 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 22:36:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 22:36:37 2012] Assessing source extent using major
[Sat Feb 18 22:36:37 2012] Source does appear to be extended
[Sat Feb 18 22:36:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 22:36:37 2012] Source is confused with source 134
[Sun Feb 19 09:16:21 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 09:16:21 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Sun Feb 19 09:16:21 2012] source mask rpix=2.3, npix_max = 31, mask sum = 23, frac = 0.726
[Sun Feb 19 09:16:21 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 10.07"
[Mon Feb 20 05:33:51 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_src35.ximg exists
[Mon Feb 20 05:33:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_src35.csv
[Mon Feb 20 05:33:51 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_src35_1.ximg exists
[Mon Feb 20 05:33:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_src35.csv
[Mon Feb 20 05:33:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 05:33:54 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Mon Feb 20 05:33:54 2012] fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Mon Feb 20 05:33:54 2012] Fit fullrun_mos2_xmm0602310101_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Mon Feb 20 05:34:39 2012] Warning, spatial fit 35 centroid is now closest to src. 134
[Mon Feb 20 05:34:40 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 05:34:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 05:34:40 2012] Assessing source extent using major
[Mon Feb 20 05:34:40 2012] Source does appear to be extended
[Mon Feb 20 05:34:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 10:40:19 2012] Counts = 1383.094971, rescaling region sizes by 2.000000
[Mon Feb 20 10:40:19 2012] XMMSAS src. selection expression = ellipse(22853.591553, 17729.938583, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Feb 20 10:40:19 2012] Writing source region out to fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src130_src.reg
[Mon Feb 20 10:40:19 2012] Extracting stamp from image fullrun_mos2_xmm0602310101_pi300-10000_cl_sm2.00.img.gz, (188, 129) - (338, 279)
[Mon Feb 20 10:40:19 2012] XMMSAS bgd. selection expression = annulus(22853.591553, 17729.938583, 4350.000000, 8700.000000, X, Y) && !ellipse(23273.004000, 17766.629600, 1038.088030, 1038.088030, 0.000000, X, Y) && !ellipse(16726.766000, 22044.484000, 1714.584049, 1714.584049, 0.000000, X, Y) && !ellipse(22932.993200, 16285.075200, 1711.720049, 1711.720049, 0.000000, X, Y) && !ellipse(23110.083313, 17091.065521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21738.994000, 10376.958000, 6034.728174, 6034.728174, 0.000000, X, Y) && !ellipse(22524.792000, 14710.296000, 1192.976034, 1192.976034, 0.000000, X, Y) && !ellipse(22790.961000, 15720.314000, 3423.440099, 822.552024, 105.306700, X, Y) && !ellipse(22148.162216, 12916.537735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22342.534000, 13272.364000, 1479.112043, 1479.112043, 0.000000, X, Y) && !ellipse(21512.270752, 9959.759048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20872.922000, 8842.734000, 2162.000062, 2162.000062, 0.000000, X, Y) && !ellipse(21398.550537, 9525.088936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31567.962000, 20970.228000, 1587.552046, 1587.552046, 0.000000, X, Y) && !ellipse(30661.202800, 19617.110800, 1150.544033, 1150.544033, 0.000000, X, Y) && !ellipse(31235.528000, 22572.842000, 1482.160043, 1482.160043, 0.000000, X, Y) && !ellipse(20788.364000, 18246.678800, 1637.248047, 1637.248047, 0.000000, X, Y) && !ellipse(22780.036621, 17186.507187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31263.606598, 23446.318878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20078.901413, 18337.526108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25525.519900, 17358.294000, 590.666417, 590.666417, 0.000000, X, Y) && !ellipse(21918.630353, 18043.051266, 1619.872047, 673.260931, 24.221121, X, Y) && !ellipse(32003.297760, 27066.562836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31756.140000, 21592.102000, 1559.120045, 1559.120045, 0.000000, X, Y) && !ellipse(31874.070000, 22522.386000, 600.810417, 600.810417, 0.000000, X, Y) && !ellipse(24758.760925, 16787.448318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20709.286000, 18200.920000, 317.196009, 317.196009, 0.000000, X, Y) && !ellipse(21497.615400, 17372.664000, 747.576022, 747.576022, 0.000000, X, Y) && !ellipse(20364.289185, 17476.067337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25773.236000, 17328.761200, 1181.336034, 1181.336034, 0.000000, X, Y) && !ellipse(18149.101334, 18779.503525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31269.900000, 19378.106000, 893.808026, 893.808026, 0.000000, X, Y) && !ellipse(31497.039429, 24567.442169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17917.947200, 27736.018000, 1575.280045, 1575.280045, 0.000000, X, Y) && !ellipse(31869.346222, 26245.179077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31664.646118, 25426.991974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30223.377512, 21052.046000, 1646.091351, 907.723691, 359.943930, X, Y) && !ellipse(31773.854000, 20331.644000, 790.960023, 790.960023, 0.000000, X, Y) && !ellipse(32386.400000, 22436.798000, 1515.272044, 1515.272044, 0.000000, X, Y) && !ellipse(32170.260000, 18697.002000, 1734.000050, 1734.000050, 0.000000, X, Y) && !ellipse(30717.937800, 19192.236000, 1611.680046, 1611.680046, 0.000000, X, Y) && !ellipse(17786.890200, 26780.630000, 938.032027, 938.032027, 0.000000, X, Y) && !ellipse(19705.826000, 17902.882000, 860.880025, 860.880025, 0.000000, X, Y) && !ellipse(16564.550644, 21607.105743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24233.054000, 17234.702000, 1094.784032, 1094.784032, 0.000000, X, Y) && !ellipse(31445.133606, 18008.838791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32712.578000, 22226.968600, 1556.552045, 1556.552045, 0.000000, X, Y) && !ellipse(32744.974000, 23252.896000, 1485.408043, 1485.408043, 0.000000, X, Y) && !ellipse(32314.395508, 24577.717133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32780.624000, 18394.706000, 1671.480048, 1671.480048, 0.000000, X, Y) && !ellipse(30019.069580, 17669.518082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32035.860000, 20620.594000, 2112.928061, 2112.928061, 0.000000, X, Y) && !ellipse(24003.604218, 16323.394333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16034.736893, 22363.905914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19758.752000, 17829.902000, 757.300822, 401.527212, 129.048000, X, Y) && !ellipse(21109.611664, 17633.195953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17652.168793, 24913.894287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32041.428000, 21526.502000, 1558.320045, 1558.320045, 0.000000, X, Y) && !ellipse(17272.681800, 19133.452000, 811.944023, 811.944023, 0.000000, X, Y) && !ellipse(16948.493800, 24722.836000, 1615.552046, 1615.552046, 0.000000, X, Y) && !ellipse(32718.233800, 19917.610000, 1608.920046, 1608.920046, 0.000000, X, Y) && !ellipse(22278.018000, 15948.962000, 1698.816049, 1698.816049, 0.000000, X, Y) && !ellipse(17481.137115, 18339.992630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19978.267838, 16823.721329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30100.796692, 18072.582062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21110.258163, 16874.667358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18933.178000, 16725.770000, 1755.152051, 1755.152051, 0.000000, X, Y) && !ellipse(16066.382187, 26727.104065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16222.377106, 24901.240417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14823.628021, 26964.559265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26159.899536, 10987.146530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20803.520000, 16779.152000, 1374.744040, 1374.744040, 0.000000, X, Y) && !ellipse(19494.500259, 18448.952377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32272.000000, 19907.677246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18084.144714, 18145.197113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21398.085907, 15540.888168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15857.631836, 21736.895523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20808.026000, 8175.822000, 2162.000062, 2162.000062, 20.787600, X, Y) && !ellipse(23595.186371, 15159.316650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30787.804108, 17909.122528, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 20 10:40:19 2012] Writing fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src130.gif
[Mon Feb 20 13:20:59 2012] Mean detx,y = (-39.11, 7331.38) 
[Mon Feb 20 13:21:03 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 13:22:26 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 13:22:27 2012] Setting source spectrum file to fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src130_src_b10.pi.gz
[Mon Feb 20 13:22:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src130_bgd.pi.gz
[Mon Feb 20 19:23:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 20 19:23:17 2012] rmf not generated due to insufficient counts
[Mon Feb 20 23:31:38 2012] Updating aperture counts using extracted products
[Mon Feb 20 23:31:38 2012] Error reading totcts from fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src130_src_b10.pi.gz
[Mon Feb 20 23:31:49 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 23:31:49 2012] Using photon index=1.80, rate=0.0163, arf fullrun_mos2_xmm0602310101_pi300-10000_pass1_cl_src130.arf
[Mon Feb 20 23:31:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 23:31:49 2012] Updating source flux to 2.5e-13
[Mon Feb 20 23:42:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting