[Sat Feb 18 04:19:14 2012] Detection parameters:
  Position = (220.4, 203.1) = 21 45 3.77 38 13 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 543.3 +/- 45.8
  Background counts = 808.3
  Rate = 0.01 +/- 0.001

[Sat Feb 18 04:19:14 2012] Off-axis axis estimate = 8.93'
[Sat Feb 18 04:27:16 2012] Using EEF radius (= 10.89 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 04:27:16 2012] Initial guess for spatial extent in simple fitting = 10.89"
[Sat Feb 18 04:27:16 2012] source mask rpix=2.5, npix_max = 36, mask sum = 29, frac = 0.803
[Sat Feb 18 04:27:16 2012] Giving source the simple spatial ID 83 for pass 0, mean size = 10.89"
[Sat Feb 18 11:24:52 2012] fullrun_mos1_xmm0602310101_pi300-10000_cl_pass0_src83.ximg exists
[Sat Feb 18 11:24:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602310101_pi300-10000_cl_pass0_src83.csv
[Sat Feb 18 11:24:52 2012] fullrun_mos1_xmm0602310101_pi300-10000_cl_pass0_src83_1.ximg exists
[Sat Feb 18 11:24:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602310101_pi300-10000_cl_pass0_src83.csv
[Sat Feb 18 11:24:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602310101_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602310101_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 11:24:55 2012] fullrun_mos1_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Sat Feb 18 11:24:55 2012] fullrun_mos1_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Sat Feb 18 11:24:55 2012] Fit fullrun_mos1_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src83 appears to have run properly
[Sat Feb 18 22:36:15 2012] Spatial fit model total counts = 8249.650000, observed total counts = 8510.000000
[Sat Feb 18 22:36:15 2012] Offset between fit and detection position for source 93 = 6.851782 pixels
[Sat Feb 18 22:36:15 2012] Warning, changing simple spatial fit ID from 83 to 67
[Sat Feb 18 22:36:15 2012] 6496.010017 total counts/ 6496.010000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 93 = 6.851782 pixels
  Position = (217.8, 209.5) = 21 45 4.74 38 14 4.1
  Extent = 16.7 (7.0-21.6)", rotation angle = 0
  Source counts = 0.0 +/- 80.6
  Background counts = 6496.0
  Rate = 2e-10 +/- 0.001
  Deleting source due to low Poisson probability