[Sat Feb 18 04:19:13 2012] Detection parameters:
  Position = (199.1, 285.9) = 21 45 11.69 38 19 36.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 586.1 +/- 53.8
  Background counts = 1186.6
  Rate = 0.009 +/- 0.0008

[Sat Feb 18 04:19:14 2012] Off-axis axis estimate = 7.26'
[Sat Feb 18 04:27:16 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 04:27:16 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Sat Feb 18 04:27:16 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.138
[Sat Feb 18 04:27:16 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 10.06"
[Sat Feb 18 11:24:51 2012] fullrun_mos1_xmm0602310101_pi300-10000_cl_pass0_src45.ximg exists
[Sat Feb 18 11:24:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602310101_pi300-10000_cl_pass0_src45.csv
[Sat Feb 18 11:24:51 2012] fullrun_mos1_xmm0602310101_pi300-10000_cl_pass0_src45_1.ximg exists
[Sat Feb 18 11:24:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602310101_pi300-10000_cl_pass0_src45.csv
[Sat Feb 18 11:24:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602310101_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602310101_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 11:24:54 2012] fullrun_mos1_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Sat Feb 18 11:24:54 2012] fullrun_mos1_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Sat Feb 18 11:24:54 2012] Fit fullrun_mos1_xmm0602310101_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Sat Feb 18 22:36:15 2012] Warning, spatial fit 45 centroid is now closest to src. 45
[Sat Feb 18 22:36:15 2012] Spatial fit model total counts = 12941.800000, observed total counts = 13024.000000
[Sat Feb 18 22:36:15 2012] Offset between fit and detection position for source 50 = 2.135117 pixels
[Sat Feb 18 22:36:15 2012] Warning, changing simple spatial fit ID from 45 to 48
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 2.135117 pixels
  Position = (200.4, 287.5) = 21 45 11.20 38 19 43.6
  Extent = 20.3 (20.3-40.6)", rotation angle = 0
  Source counts = 9090.6 +/- 95.3
  Background counts = 0.0
  Rate = 0.1 +/- 0.001
 Deleting source due to low signal-to-noise ratio