[Sat Feb 18 04:19:13 2012] Detection parameters:
  Position = (367.5, 317.7) = 21 44 9.42 38 21 51.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 345.0 +/- 29.2
  Background counts = 675.8
  Rate = 0.004 +/- 0.0003

[Sat Feb 18 04:19:14 2012] Off-axis axis estimate = 5.20'
[Sat Feb 18 04:27:16 2012] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 04:27:16 2012] Initial guess for spatial extent in simple fitting = 9.03"
[Sat Feb 18 04:27:16 2012] source mask rpix=2.1, npix_max = 26, mask sum = 11, frac = 0.415
[Sat Feb 18 04:27:16 2012] Skipping simple spatial due to low active detector fraction
[Sat Feb 18 22:36:15 2012] Spatial fit model total counts = 7337.440000, observed total counts = 7858.000000
[Sat Feb 18 22:36:15 2012] Offset between fit and detection position for source 33 = 2.920453 pixels
[Sat Feb 18 22:36:15 2012] Warning, changing simple spatial fit ID from -1 to 31
[Sat Feb 18 22:36:15 2012] 7016.810000 total counts/ 3047.340000 bgd. counts: snr = 71.907149
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 2.920453 pixels
  Position = (370.1, 316.4) = 21 44 8.46 38 21 49.2
  Extent = 17.6 (17.6-17.7)", rotation angle = 0
  Source counts = 3969.5 +/- 83.8
  Background counts = 3047.3
  Rate = 0.05 +/- 0.001
[Sat Feb 18 22:36:15 2012] Source 33 is offset by 0.323517 and -2.568851 pixels which is larger than
2 X fitted extent = 1.069329 x 1.069329, not incorporating fit results
[Sat Feb 18 22:36:15 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 22:36:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 22:36:15 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 22:36:15 2012] Source does appear to be extended
[Sat Feb 18 22:36:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 22:36:15 2012] Source is confused with source 30
[Sat Feb 18 22:36:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 18 22:36:58 2012] Initial guess for spatial extent in simple fitting = 17.64"
[Sat Feb 18 22:36:58 2012] source mask rpix=4.1, npix_max = 83, mask sum = 67, frac = 0.807
[Sat Feb 18 22:36:58 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 17.64"
[Sun Feb 19 09:16:18 2012] fullrun_mos1_xmm0602310101_pi300-10000_cl_pass1_src27.ximg exists
[Sun Feb 19 09:16:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602310101_pi300-10000_cl_pass1_src27.csv
[Sun Feb 19 09:16:18 2012] fullrun_mos1_xmm0602310101_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun Feb 19 09:16:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602310101_pi300-10000_cl_pass1_src27.csv
[Sun Feb 19 09:16:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602310101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602310101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 09:16:19 2012] fullrun_mos1_xmm0602310101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun Feb 19 09:16:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602310101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sun Feb 19 09:16:19 2012] fullrun_mos1_xmm0602310101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun Feb 19 09:16:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602310101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sun Feb 19 09:16:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602310101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602310101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 05:34:17 2012] Warning, spatial fit 27 centroid is now closest to src. 52
[Mon Feb 20 05:34:17 2012] Source 33 is offset by -1.258690 and 1.724506 pixels which is larger than
2 X fitted extent = 1.078612 x 1.078612, not incorporating fit results
[Mon Feb 20 05:34:17 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 05:34:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 05:34:17 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 05:34:17 2012] Source does appear to be extended
[Mon Feb 20 05:34:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 05:35:01 2012] Counts = 3969.470000, rescaling region sizes by 2.000000
[Mon Feb 20 05:35:01 2012] XMMSAS src. selection expression = ellipse(32151.280000, 27474.246000, 2117.160061, 2117.160061, 0.000000, X, Y)
[Mon Feb 20 05:35:01 2012] Writing source region out to fullrun_mos1_xmm0602310101_pi300-10000_pass1_cl_src33_src.reg
[Mon Feb 20 05:35:01 2012] Extracting stamp from image fullrun_mos1_xmm0602310101_pi300-10000_cl_sm2.00.img.gz, (248, 195) - (492, 438)
[Mon Feb 20 05:35:02 2012] XMMSAS bgd. selection expression = annulus(32151.280000, 27474.246000, 7057.200203, 14114.400406, X, Y) && !ellipse(17495.581200, 26617.026000, 5394.096155, 5394.096155, 0.000000, X, Y) && !ellipse(23114.742889, 17872.601273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22787.423400, 15731.608000, 1162.048033, 1162.048033, 0.000000, X, Y) && !ellipse(22557.494720, 14480.368576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22392.646606, 13780.911728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22212.350200, 13265.584000, 1870.672054, 1870.672054, 0.000000, X, Y) && !ellipse(22280.292000, 11937.544000, 2536.360073, 1147.448033, 308.922000, X, Y) && !ellipse(19561.332657, 34434.863861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18593.301600, 31840.992000, 1669.519409, 1669.519409, 0.000000, X, Y) && !ellipse(18939.519485, 31278.238464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33419.519592, 30777.701721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32967.722000, 30492.194000, 516.324815, 516.324815, 0.000000, X, Y) && !ellipse(18082.804070, 29736.283968, 1668.488048, 1581.899213, 90.000000, X, Y) && !ellipse(17199.038925, 29935.475983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17657.084000, 29558.828000, 726.175221, 726.175221, 0.000000, X, Y) && !ellipse(32264.061462, 29099.494873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33621.694000, 28590.929400, 1549.048045, 1549.048045, 0.000000, X, Y) && !ellipse(32098.000000, 28297.782227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17428.080000, 27839.686000, 938.928027, 938.928027, 0.000000, X, Y) && !ellipse(32822.744000, 28236.902000, 1489.432043, 1489.432043, 0.000000, X, Y) && !ellipse(32591.949615, 27707.863922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31963.340000, 27224.798000, 1489.432043, 1488.280043, 339.604000, X, Y) && !ellipse(18037.067062, 27374.270111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32729.153564, 26997.561279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17540.604200, 27325.030000, 8122.008234, 8122.008234, 0.000000, X, Y) && !ellipse(33824.994000, 26636.870000, 1591.072046, 607.325617, 345.710000, X, Y) && !ellipse(33625.885080, 26609.148400, 3182.144092, 479.925614, 343.884000, X, Y) && !ellipse(17414.506000, 25273.616000, 5496.744158, 5496.744158, 0.000000, X, Y) && !ellipse(32422.933105, 25358.346191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33658.544000, 24432.474000, 1514.896044, 1514.896044, 0.000000, X, Y) && !ellipse(32417.049561, 24583.704224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31413.743195, 24743.236969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17102.342000, 24649.798000, 1202.840035, 1202.840035, 0.000000, X, Y) && !ellipse(16566.235800, 23708.838000, 1656.024048, 475.852814, 291.117000, X, Y) && !ellipse(31368.472000, 23772.668000, 1195.312034, 1195.312034, 0.000000, X, Y) && !ellipse(17393.438843, 23539.651123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16736.324000, 23277.639600, 1668.256048, 719.634421, 342.723000, X, Y) && !ellipse(31330.433400, 22453.640000, 1455.816042, 1455.816042, 0.000000, X, Y) && !ellipse(31827.316000, 22594.478800, 1514.016044, 1514.016044, 0.000000, X, Y) && !ellipse(30967.007965, 22049.687180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32208.316000, 21596.218000, 1526.640044, 1526.640044, 0.000000, X, Y) && !ellipse(30765.132812, 20899.432907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32524.185303, 21016.060379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30486.195435, 19830.123840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17406.834793, 19099.648285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31539.134918, 19164.738983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32165.324000, 18814.236000, 842.288024, 842.288024, 0.000000, X, Y) && !ellipse(20104.546000, 18487.036000, 795.556023, 795.556023, 0.000000, X, Y) && !ellipse(30721.264400, 18936.976000, 1621.184047, 1621.184047, 0.000000, X, Y) && !ellipse(17703.197200, 18481.952000, 1789.024051, 1789.024051, 0.000000, X, Y) && !ellipse(24226.383553, 17785.356102, 1587.728046, 809.885575, 19.553117, X, Y) && !ellipse(19579.548813, 17918.782852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19451.328156, 17652.001526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21573.470000, 18315.316000, 489.795214, 489.795214, 0.000000, X, Y) && !ellipse(24625.895294, 17627.876602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22082.744949, 17712.917191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18551.264000, 16927.462000, 1559.520045, 1559.520045, 0.000000, X, Y) && !ellipse(18278.867218, 17089.449936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21080.462097, 17521.655518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20680.017303, 16491.439102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20004.428000, 16740.834000, 879.696025, 879.696025, 0.000000, X, Y) && !ellipse(19410.348000, 16021.374000, 1629.440047, 1629.440047, 0.000000, X, Y)
[Mon Feb 20 05:35:02 2012] Writing fullrun_mos1_xmm0602310101_pi300-10000_pass1_cl_src33.gif
[Mon Feb 20 06:41:27 2012] Mean detx,y = (-3991.82, -7813.66) 
[Mon Feb 20 06:41:30 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 06:45:03 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 06:45:03 2012] Setting source spectrum file to fullrun_mos1_xmm0602310101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Mon Feb 20 06:45:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602310101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Mon Feb 20 23:31:25 2012] Updating aperture counts using extracted products
[Mon Feb 20 23:31:25 2012] Error reading totcts from fullrun_mos1_xmm0602310101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Mon Feb 20 23:31:30 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 23:31:30 2012] Using photon index=1.80, rate=0.0469, arf fullrun_mos1_xmm0602310101_pi300-10000_pass1_cl_src33.arf
[Mon Feb 20 23:31:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 23:31:30 2012] Updating source flux to 6.5e-13
[Mon Feb 20 23:32:01 2012] Flag b found in src. 33 procflags, skipping spectral fitting
[Mon Feb 20 23:32:01 2012] Flag c found in src. 33 procflags, skipping spectral fitting