[Sun May 19 14:54:30 2013] Detection parameters:
  Position = (179.8, 474.6) = 9 36 23.42 35 59 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.4 +/- 18.2
  Background counts = 127.1
  Rate = 0.002 +/- 0.0002

[Sun May 19 14:54:34 2013] Off-axis axis estimate = 15.40'
[Sun May 19 14:55:04 2013] Using EEF radius (= 14.13 ")to estimate initial spatial extent for simple fitting
[Sun May 19 14:55:04 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 19 14:55:04 2013] Initial guess for spatial extent in simple fitting = 14.13"
[Sun May 19 14:55:04 2013] source mask rpix=3.2, npix_max = 56, mask sum = 43, frac = 0.765
[Sun May 19 14:55:04 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 14.13"
[Sun May 19 14:55:05 2013] fullrun_pn_xmm0602290101_pi300-10000_cl_pass0_src11.ximg exists
[Sun May 19 14:55:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602290101_pi300-10000_cl_pass0_src11.csv
[Sun May 19 14:55:05 2013] fullrun_pn_xmm0602290101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun May 19 14:55:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602290101_pi300-10000_cl_pass0_src11.csv
[Sun May 19 14:55:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602290101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602290101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:55:07 2013] fullrun_pn_xmm0602290101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun May 19 14:55:07 2013] fullrun_pn_xmm0602290101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun May 19 14:55:07 2013] Fit fullrun_pn_xmm0602290101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun May 19 14:55:31 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 11.246525 pixels away
[Sun May 19 14:55:31 2013] Spatial fit model total counts = 739.008000, observed total counts = 792.000000
[Sun May 19 14:55:31 2013] Offset between fit and detection position for source 12 = 9.354088 pixels
[Sun May 19 14:55:31 2013] 1815.250000 total counts/ 1321.880000 bgd. counts: snr = 13.569902
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 9.354088 pixels
  Position = (170.9, 471.9) = 9 36 26.63 35 59 27.0
  Extent = 28.3 (28.2-56.5)", rotation angle = 0
  Source counts = 493.4 +/- 42.6
  Background counts = 1321.9
  Rate = 0.008 +/- 0.0007
[Sun May 19 14:55:31 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:55:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:55:31 2013] Assessing source extent using major axis lower bound
[Sun May 19 14:55:31 2013] Source does appear to be extended
[Sun May 19 14:55:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:55:31 2013] Source is confused with source 10
[Sun May 19 14:55:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 19 14:55:55 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 19 14:55:55 2013] Initial guess for spatial extent in simple fitting = 28.25"
[Sun May 19 14:55:55 2013] source mask rpix=6.5, npix_max = 195, mask sum = 102, frac = 0.521
[Sun May 19 14:55:55 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 28.25"
[Sun May 19 14:55:56 2013] fullrun_pn_xmm0602290101_pi300-10000_cl_pass1_src11.ximg exists
[Sun May 19 14:55:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602290101_pi300-10000_cl_pass1_src11.csv
[Sun May 19 14:55:56 2013] fullrun_pn_xmm0602290101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun May 19 14:55:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602290101_pi300-10000_cl_pass1_src11.csv
[Sun May 19 14:55:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602290101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602290101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:55:57 2013] fullrun_pn_xmm0602290101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun May 19 14:55:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602290101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun May 19 14:55:57 2013] fullrun_pn_xmm0602290101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun May 19 14:55:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602290101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun May 19 14:55:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602290101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602290101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:56:14 2013] Source 12 is offset by -7.212161 and 4.803747 pixels which is larger than
2 X fitted extent = 1.511881 x 1.511881, not incorporating fit results
[Sun May 19 14:56:14 2013] Warning, spatial fit 11 centroid is now closest to src. 10
[Sun May 19 14:56:14 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:56:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:56:14 2013] Assessing source extent using major axis lower bound
[Sun May 19 14:56:14 2013] Source does appear to be extended
[Sun May 19 14:56:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:56:37 2013] XMMSAS src. selection expression = ellipse(14818.310000, 41006.694000, 1695.162049, 1695.162049, 0.000000, X, Y)
[Sun May 19 14:56:37 2013] Not overwriting source region fullrun_pn_xmm0602290101_pi300-10000_pass1_cl_src12_src.reg
[Sun May 19 14:56:37 2013] Extracting stamp from image fullrun_pn_xmm0602290101_pi300-10000_cl_sm2.00.img.gz, (73, 374) - (268, 569)
[Sun May 19 14:56:37 2013] XMMSAS bgd. selection expression = annulus(14818.310000, 41006.694000, 2825.270081, 5650.540163, X, Y) && !ellipse(14433.959991, 39485.605743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19270.393219, 36977.213715, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 14:56:37 2013] Writing fullrun_pn_xmm0602290101_pi300-10000_pass1_cl_src12.gif
[Sun May 19 14:56:41 2013] ../../xmm0602290101/products/events/fullrun_pn_xmm0602290101_pi300-10000_pass1_cl_src12_src.evt and ../../xmm0602290101/products/events/fullrun_pn_xmm0602290101_pi300-10000_pass1_cl_src12_bgd.evt exist, delete to re-create
[Sun May 19 14:56:42 2013] Mean detx,y = (-6371.24, -15768.08) 
[Sun May 19 14:56:42 2013] ../../xmm0602290101/products/images/fullrun_pn_xmm0602290101_pi300-10000_pass1_cl_src12_src.img and ../../xmm0602290101/products/images/fullrun_pn_xmm0602290101_pi300-10000_pass1_cl_src12_bgd.img exist, delete to re-create
[Sun May 19 14:56:42 2013] ../../xmm0602290101/products/spectra/fullrun_pn_xmm0602290101_pi300-10000_pass1_cl_src12_src.pi and ../../xmm0602290101/products/spectra/fullrun_pn_xmm0602290101_pi300-10000_pass1_cl_src12_bgd.pi exist, delete to re-create
[Sun May 19 14:56:42 2013] Setting source spectrum file to fullrun_pn_xmm0602290101_pi300-10000_pass1_cl_src12_src.pi.gz
[Sun May 19 14:56:42 2013] Setting bgd. spectrum file to fullrun_pn_xmm0602290101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun May 19 14:56:42 2013] ../../xmm0602290101/products/lightcurves/fullrun_pn_xmm0602290101_pi300-10000_pass1_cl_src12_src.lc and ../../xmm0602290101/products/lightcurves/fullrun_pn_xmm0602290101_pi300-10000_pass1_cl_src12_bgd.lc exist, delete to re-create
[Sun May 19 15:03:36 2013] Updating aperture counts using extracted products
[Sun May 19 15:03:36 2013] Total counts from fullrun_pn_xmm0602290101_pi300-10000_pass1_cl_src12_src.pi.gz = 1958.00
[Sun May 19 15:03:36 2013] Total counts from fullrun_pn_xmm0602290101_pi300-10000_pass1_cl_src12_bgd.pi.gz = 13379.00
[Sun May 19 15:03:36 2013] Got source and background scale factors 1901104.000000, 26524208.000000
[Sun May 19 15:03:36 2013] User source parameters:
  Position = (170.9, 471.9) = 9 36 26.63 35 59 27.0
  Extent = 28.3 (28.2-56.5)", rotation angle = 0
  Source aperture counts = 999.1 +/- 45.3
  Background aperture counts = 958.9
  Rate = 0.02 +/- 0.0007

[Sun May 19 15:03:47 2013] No arf file for this source, not re-computing flux
[Sun May 19 15:04:01 2013] Flag b found in src. 12 procflags, skipping spectral fitting
[Sun May 19 15:04:01 2013] Flag c found in src. 12 procflags, skipping spectral fitting
[Sun May 19 15:04:01 2013] Source 12 has no response, skipping
[Sun May 19 15:04:02 2013] xmm0602290101/analysis//spectral/fullrun_pn_xmm0602290101_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete