[Sun May 19 14:54:38 2013] Detection parameters:
  Position = (445.8, 393.5) = 9 34 48.15 35 53 46.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.3 +/- 14.1
  Background counts = 50.0
  Rate = 0.0008 +/- 0.0002

[Sun May 19 14:54:39 2013] Off-axis axis estimate = 12.71'
[Sun May 19 14:55:11 2013] Using EEF radius (= 12.79 ")to estimate initial spatial extent for simple fitting
[Sun May 19 14:55:11 2013] Initial guess for spatial extent in simple fitting = 12.79"
[Sun May 19 14:55:11 2013] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.036
[Sun May 19 14:55:11 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 12.79"
[Sun May 19 14:55:12 2013] fullrun_mos2_xmm0602290101_pi300-10000_cl_pass0_src29.ximg exists
[Sun May 19 14:55:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602290101_pi300-10000_cl_pass0_src29.csv
[Sun May 19 14:55:12 2013] fullrun_mos2_xmm0602290101_pi300-10000_cl_pass0_src29_1.ximg exists
[Sun May 19 14:55:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602290101_pi300-10000_cl_pass0_src29.csv
[Sun May 19 14:55:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602290101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602290101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:55:12 2013] fullrun_mos2_xmm0602290101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sun May 19 14:55:12 2013] fullrun_mos2_xmm0602290101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sun May 19 14:55:12 2013] Fit fullrun_mos2_xmm0602290101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sun May 19 14:55:41 2013] Spatial fit model total counts = 609.946000, observed total counts = 552.000000
[Sun May 19 14:55:41 2013] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 14:55:41 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:55:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:55:41 2013] Assessing source extent using major
[Sun May 19 14:55:41 2013] Source does appear to be extended
[Sun May 19 14:55:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:55:59 2013] Using EEF radius (= 12.79 ")to estimate initial spatial extent for simple fitting
[Sun May 19 14:55:59 2013] Initial guess for spatial extent in simple fitting = 12.79"
[Sun May 19 14:55:59 2013] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.036
[Sun May 19 14:55:59 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 12.79"
[Sun May 19 14:56:00 2013] fullrun_mos2_xmm0602290101_pi300-10000_cl_pass1_src29.ximg exists
[Sun May 19 14:56:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0602290101_pi300-10000_cl_pass1_src29.csv
[Sun May 19 14:56:00 2013] fullrun_mos2_xmm0602290101_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun May 19 14:56:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0602290101_pi300-10000_cl_pass1_src29.csv
[Sun May 19 14:56:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602290101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602290101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:56:00 2013] fullrun_mos2_xmm0602290101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun May 19 14:56:00 2013] fullrun_mos2_xmm0602290101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun May 19 14:56:00 2013] Fit fullrun_mos2_xmm0602290101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sun May 19 14:56:23 2013] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 12.453894 pixels away
[Sun May 19 14:56:23 2013] Warning, spatial fit 29 centroid is now closest to src. 12
[Sun May 19 14:56:23 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:56:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:56:23 2013] Assessing source extent using major
[Sun May 19 14:56:23 2013] Source does appear to be extended
[Sun May 19 14:56:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 15:01:25 2013] XMMSAS src. selection expression = ellipse(38736.590118, 34184.922058, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 15:01:25 2013] Not overwriting source region fullrun_mos2_xmm0602290101_pi300-10000_pass1_cl_src15_src.reg
[Sun May 19 15:01:25 2013] Extracting stamp from image fullrun_mos2_xmm0602290101_pi300-10000_cl_sm2.00.img.gz, (408, 356) - (483, 431)
[Sun May 19 15:01:26 2013] XMMSAS bgd. selection expression = annulus(38736.590118, 34184.922058, 1087.500000, 2175.000000, X, Y) && !ellipse(37289.439850, 31373.846069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36978.358032, 33438.179138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39586.941200, 34803.230600, 433.354412, 433.354412, 0.000000, X, Y) && !ellipse(40061.776306, 35783.159424, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 15:01:26 2013] Writing fullrun_mos2_xmm0602290101_pi300-10000_pass1_cl_src15.gif
[Sun May 19 15:01:27 2013] ../../xmm0602290101/products/events/fullrun_mos2_xmm0602290101_pi300-10000_pass1_cl_src15_src.evt and ../../xmm0602290101/products/events/fullrun_mos2_xmm0602290101_pi300-10000_pass1_cl_src15_bgd.evt exist, delete to re-create
[Sun May 19 15:01:27 2013] Mean detx,y = (-13592.71, 2004.58) 
[Sun May 19 15:01:27 2013] ../../xmm0602290101/products/images/fullrun_mos2_xmm0602290101_pi300-10000_pass1_cl_src15_src.img and ../../xmm0602290101/products/images/fullrun_mos2_xmm0602290101_pi300-10000_pass1_cl_src15_bgd.img exist, delete to re-create
[Sun May 19 15:01:27 2013] ../../xmm0602290101/products/spectra/fullrun_mos2_xmm0602290101_pi300-10000_pass1_cl_src15_src.pi and ../../xmm0602290101/products/spectra/fullrun_mos2_xmm0602290101_pi300-10000_pass1_cl_src15_bgd.pi exist, delete to re-create
[Sun May 19 15:01:27 2013] Setting source spectrum file to fullrun_mos2_xmm0602290101_pi300-10000_pass1_cl_src15_src.pi.gz
[Sun May 19 15:01:27 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0602290101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun May 19 15:01:27 2013] ../../xmm0602290101/products/lightcurves/fullrun_mos2_xmm0602290101_pi300-10000_pass1_cl_src15_src.lc and ../../xmm0602290101/products/lightcurves/fullrun_mos2_xmm0602290101_pi300-10000_pass1_cl_src15_bgd.lc exist, delete to re-create
[Sun May 19 15:01:35 2013] Not generating rmf since there are only 68 counts
[Sun May 19 15:01:35 2013] rmf not generated due to insufficient counts
[Sun May 19 15:03:56 2013] Updating aperture counts using extracted products
[Sun May 19 15:03:56 2013] Total counts from fullrun_mos2_xmm0602290101_pi300-10000_pass1_cl_src15_src.pi.gz = 312.00
[Sun May 19 15:03:56 2013] Total counts from fullrun_mos2_xmm0602290101_pi300-10000_pass1_cl_src15_bgd.pi.gz = 1629.00
[Sun May 19 15:03:56 2013] Got source and background scale factors 1289752.000000, 7600632.000000
[Sun May 19 15:03:56 2013] User source parameters:
  Position = (445.8, 393.5) = 9 34 48.15 35 53 46.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 35.6 +/- 18.7
  Background aperture counts = 276.4
  Rate = 0.0004 +/- 0.0002

[Sun May 19 15:03:56 2013] Updating counts from extracted products
[Sun May 19 15:03:56 2013] Set source signif. to 35.57/16.63 = 2.14
[Sun May 19 15:03:56 2013] No arf file for this source, not re-computing flux
[Sun May 19 15:04:00 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 19 15:04:01 2013] xmm0602290101/analysis//spectral/fullrun_mos2_xmm0602290101_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete