[Sun May 19 14:54:36 2013] Detection parameters:
  Position = (352.0, 272.4) = 9 35 21.78 35 45 0.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.4 +/- 15.1
  Background counts = 68.0
  Rate = 0.002 +/- 0.0002

[Sun May 19 14:54:36 2013] Off-axis axis estimate = 4.32'
[Sun May 19 14:55:09 2013] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Sun May 19 14:55:09 2013] Initial guess for spatial extent in simple fitting = 8.59"
[Sun May 19 14:55:09 2013] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.735
[Sun May 19 14:55:09 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 8.59"
[Sun May 19 14:55:10 2013] fullrun_mos1_xmm0602290101_pi300-10000_cl_pass0_src19.ximg exists
[Sun May 19 14:55:10 2013] fullrun_mos1_xmm0602290101_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun May 19 14:55:10 2013] Fit fullrun_mos1_xmm0602290101_pi300-10000_cl_pass0_src19 appears to have run properly
[Sun May 19 14:55:10 2013] fullrun_mos1_xmm0602290101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun May 19 14:55:10 2013] fullrun_mos1_xmm0602290101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun May 19 14:55:10 2013] Fit fullrun_mos1_xmm0602290101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sun May 19 14:55:36 2013] Spatial fit model total counts = 562.548000, observed total counts = 559.000000
[Sun May 19 14:55:36 2013] Offset between fit and detection position for source 23 = 0.402738 pixels
[Sun May 19 14:55:36 2013] 544.271400 total counts/ 486.663000 bgd. counts: snr = 2.611389
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.402738 pixels
  Position = (352.1, 272.1) = 9 35 21.72 35 44 58.2
  Extent = 5.3" x 3.4", rotation angle = 294
  Source counts = 57.6 +/- 23.3
  Background counts = 486.7
  Rate = 0.0007 +/- 0.0003
[Sun May 19 14:55:36 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:55:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:55:36 2013] Assessing source extent using major
[Sun May 19 14:55:36 2013] Source does appear to be extended
[Sun May 19 14:55:36 2013] Computing asymmetry using major and minor axis, asym = 1.57
[Sun May 19 14:55:36 2013] Source is asymmetric
[Sun May 19 14:55:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 19 14:55:58 2013] Initial guess for spatial extent in simple fitting = 4.38"
[Sun May 19 14:55:58 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.990
[Sun May 19 14:55:58 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 4.38"
[Sun May 19 14:55:59 2013] fullrun_mos1_xmm0602290101_pi300-10000_cl_pass1_src17.ximg exists
[Sun May 19 14:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602290101_pi300-10000_cl_pass1_src17.csv
[Sun May 19 14:55:59 2013] fullrun_mos1_xmm0602290101_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun May 19 14:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602290101_pi300-10000_cl_pass1_src17.csv
[Sun May 19 14:55:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602290101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602290101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:55:59 2013] fullrun_mos1_xmm0602290101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun May 19 14:55:59 2013] fullrun_mos1_xmm0602290101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun May 19 14:55:59 2013] Fit fullrun_mos1_xmm0602290101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sun May 19 14:56:18 2013] Spatial fit model total counts = 551.792000, observed total counts = 559.000000
[Sun May 19 14:56:18 2013] Offset between fit and detection position for source 23 = 0.118317 pixels
[Sun May 19 14:56:18 2013] 551.107000 total counts/ 497.932000 bgd. counts: snr = 2.382991
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.118317 pixels
  Position = (352.1, 271.9) = 9 35 21.73 35 44 57.7
  Extent = 4.1 (2.7-6.0)", rotation angle = 0
  Source counts = 53.2 +/- 23.5
  Background counts = 497.9
  Rate = 0.0007 +/- 0.0003
[Sun May 19 14:56:18 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:56:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:56:18 2013] Assessing source extent using major axis lower bound
[Sun May 19 14:56:18 2013] Source does appear to be extended
[Sun May 19 14:56:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:57:21 2013] XMMSAS src. selection expression = ellipse(30584.840440, 23610.893400, 243.204007, 243.204007, 0.000000, X, Y)
[Sun May 19 14:57:21 2013] Not overwriting source region fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src23_src.reg
[Sun May 19 14:57:21 2013] Extracting stamp from image fullrun_mos1_xmm0602290101_pi300-10000_cl_sm2.00.img.gz, (338, 258) - (366, 286)
[Sun May 19 14:57:21 2013] XMMSAS bgd. selection expression = annulus(30584.840440, 23610.893400, 405.340012, 810.680023, X, Y)
[Sun May 19 14:57:21 2013] Writing fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src23.gif
[Sun May 19 14:58:40 2013] Mean detx,y = (-5125.85, 2286.89) 
[Sun May 19 14:58:41 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 14:58:48 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 14:58:48 2013] Setting source spectrum file to fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sun May 19 14:58:48 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sun May 19 15:00:47 2013] Not generating rmf since there are only 53 counts
[Sun May 19 15:00:47 2013] rmf not generated due to insufficient counts
[Sun May 19 15:03:50 2013] Updating aperture counts using extracted products
[Sun May 19 15:03:50 2013] Total counts from fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 102.00
[Sun May 19 15:03:50 2013] Total counts from fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src23_bgd.pi.gz = 401.00
[Sun May 19 15:03:50 2013] Got source and background scale factors 187200.000000, 1368160.000000
[Sun May 19 15:03:50 2013] User source parameters:
  Position = (352.1, 271.9) = 9 35 21.73 35 44 57.7
  Extent = 4.1 (2.7-6.0)", rotation angle = 0
  Source aperture counts = 47.1 +/- 11.1
  Background aperture counts = 54.9
  Rate = 0.0006 +/- 0.0001

[Sun May 19 15:03:51 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 15:03:51 2013] Using photon index=1.80, rate=0.000676, arf fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src23.arf
[Sun May 19 15:03:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 15:03:51 2013] Updating source flux to 1.6e-14
[Sun May 19 15:03:59 2013] Source 23 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 19 15:04:00 2013] xmm0602290101/analysis//spectral/fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete