[Sun May 19 14:54:35 2013] Detection parameters:
  Position = (304.0, 319.9) = 9 35 38.91 35 48 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 14281.1 +/- 158.5
  Background counts = 67.2
  Rate = 0.2 +/- 0.002

[Sun May 19 14:54:36 2013] Off-axis axis estimate = 1.61'
[Sun May 19 14:55:09 2013] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Sun May 19 14:55:09 2013] Initial guess for spatial extent in simple fitting = 7.23"
[Sun May 19 14:55:09 2013] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.695
[Sun May 19 14:55:09 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.23"
[Sun May 19 14:55:09 2013] fullrun_mos1_xmm0602290101_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 19 14:55:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0602290101_pi300-10000_cl_pass0_src1.csv
[Sun May 19 14:55:10 2013] fullrun_mos1_xmm0602290101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 19 14:55:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0602290101_pi300-10000_cl_pass0_src1.csv
[Sun May 19 14:55:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602290101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602290101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:55:10 2013] fullrun_mos1_xmm0602290101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 19 14:55:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602290101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 19 14:55:10 2013] fullrun_mos1_xmm0602290101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 19 14:55:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602290101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 19 14:55:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602290101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602290101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:55:36 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.269822 pixels away
[Sun May 19 14:55:36 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:55:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:55:36 2013] Assessing source extent using major
[Sun May 19 14:55:36 2013] Source does appear to be extended
[Sun May 19 14:55:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:55:58 2013] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Sun May 19 14:55:58 2013] Initial guess for spatial extent in simple fitting = 7.23"
[Sun May 19 14:55:58 2013] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.695
[Sun May 19 14:55:58 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.23"
[Sun May 19 14:55:58 2013] fullrun_mos1_xmm0602290101_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 19 14:55:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602290101_pi300-10000_cl_pass1_src1.csv
[Sun May 19 14:55:58 2013] fullrun_mos1_xmm0602290101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 19 14:55:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602290101_pi300-10000_cl_pass1_src1.csv
[Sun May 19 14:55:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602290101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602290101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:55:59 2013] fullrun_mos1_xmm0602290101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 19 14:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602290101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 19 14:55:59 2013] fullrun_mos1_xmm0602290101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 19 14:55:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602290101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 19 14:55:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602290101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602290101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 14:56:18 2013] Spatial fit model total counts = 11160.700000, observed total counts = 12664.000000
[Sun May 19 14:56:18 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 14:56:18 2013] Vigneting correction estimate = 1.000000
[Sun May 19 14:56:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 14:56:18 2013] Assessing source extent using major
[Sun May 19 14:56:18 2013] Source does appear to be extended
[Sun May 19 14:56:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 14:57:20 2013] Counts = 14281.051758, rescaling region sizes by 3.000000
[Sun May 19 14:57:20 2013] XMMSAS src. selection expression = ellipse(26401.278870, 27786.110291, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sun May 19 14:57:20 2013] Not overwriting source region fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src1_src.reg
[Sun May 19 14:57:20 2013] Extracting stamp from image fullrun_mos1_xmm0602290101_pi300-10000_cl_sm2.00.img.gz, (192, 207) - (417, 432)
[Sun May 19 14:57:20 2013] XMMSAS bgd. selection expression = annulus(26401.278870, 27786.110291, 9787.500000, 19575.000000, X, Y) && !ellipse(29466.227400, 27320.053200, 515.060015, 515.060015, 0.000000, X, Y) && !ellipse(29272.044018, 22403.339980, 323.585609, 323.585609, 0.000000, X, Y) && !ellipse(36549.515045, 22319.402313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37283.928009, 31332.735596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26533.191000, 23967.196800, 399.824812, 399.824812, 0.000000, X, Y) && !ellipse(33632.030792, 23960.473267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28849.499969, 22028.352692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37006.333960, 30425.270200, 322.916809, 322.916809, 0.000000, X, Y) && !ellipse(32265.596000, 25454.232000, 848.960024, 848.960024, 0.000000, X, Y) && !ellipse(33874.002197, 28998.189575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23460.295820, 33400.413800, 394.506411, 394.506411, 0.000000, X, Y) && !ellipse(21345.975920, 19639.608400, 386.240811, 386.240811, 0.000000, X, Y) && !ellipse(36920.052300, 33453.537600, 401.491212, 401.491212, 0.000000, X, Y) && !ellipse(20959.668884, 12910.956863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18465.728180, 34015.990509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21941.983261, 39076.585205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30584.840440, 23610.893400, 324.272009, 324.272009, 0.000000, X, Y) && !ellipse(27967.880140, 22438.244400, 497.488014, 497.488014, 0.000000, X, Y) && !ellipse(12938.116486, 27419.124176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38795.502563, 34167.462585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19284.874360, 37009.392600, 415.079212, 415.079212, 0.000000, X, Y) && !ellipse(27615.927980, 25583.881600, 403.077612, 403.077612, 0.000000, X, Y) && !ellipse(28498.195760, 29198.764600, 359.869610, 359.869610, 0.000000, X, Y) && !ellipse(20867.731400, 16122.985800, 512.788815, 512.788815, 0.000000, X, Y)
[Sun May 19 14:57:20 2013] Writing fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src1.gif
[Sun May 19 14:57:21 2013] ../../xmm0602290101/products/events/fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0602290101/products/events/fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun May 19 14:57:21 2013] Mean detx,y = (284.50, -272.49) 
[Sun May 19 14:57:21 2013] ../../xmm0602290101/products/images/fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0602290101/products/images/fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun May 19 14:57:21 2013] ../../xmm0602290101/products/spectra/fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src1_src.pi and ../../xmm0602290101/products/spectra/fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun May 19 14:57:21 2013] Setting source spectrum file to fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src1_src.pi.gz
[Sun May 19 14:57:21 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun May 19 14:57:21 2013] ../../xmm0602290101/products/lightcurves/fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0602290101/products/lightcurves/fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun May 19 15:00:30 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 19 15:00:30 2013] rmf not generated due to insufficient counts
[Sun May 19 15:03:47 2013] Updating aperture counts using extracted products
[Sun May 19 15:03:47 2013] Total counts from fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src1_src.pi.gz = 16882.00
[Sun May 19 15:03:47 2013] Total counts from fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 99220.00
[Sun May 19 15:03:47 2013] Got source and background scale factors 11640552.000000, 445865243.000000
[Sun May 19 15:03:47 2013] User source parameters:
  Position = (304.0, 319.9) = 9 35 38.91 35 48 33.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 14291.6 +/- 130.9
  Background aperture counts = 2590.4
  Rate = 0.2 +/- 0.002

[Sun May 19 15:03:47 2013] Updating counts from extracted products
[Sun May 19 15:03:47 2013] Set source signif. to 14291.59/50.90 = 280.80
[Sun May 19 15:03:51 2013] No arf file for this source, not re-computing flux
[Sun May 19 15:03:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 19 15:04:00 2013] xmm0602290101/analysis//spectral/fullrun_mos1_xmm0602290101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete