[Tue Mar 13 04:13:50 2012] Detection parameters:
  Position = (328.0, 384.8) = 11 45 5.15 19 36 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8421.6 +/- 109.7
  Background counts = 164.7
  Rate = 0.4 +/- 0.006

[Tue Mar 13 04:13:50 2012] Off-axis axis estimate = 6.62'
[Tue Mar 13 04:18:17 2012] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 04:18:17 2012] Initial guess for spatial extent in simple fitting = 9.74"
[Tue Mar 13 04:18:17 2012] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.200
[Tue Mar 13 04:18:17 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.74"
[Tue Mar 13 04:37:25 2012] fullrun_pn_xmm0602200301_pi300-10000_cl_pass0_src2.ximg exists
[Tue Mar 13 04:37:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602200301_pi300-10000_cl_pass0_src2.csv
[Tue Mar 13 04:37:25 2012] fullrun_pn_xmm0602200301_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Mar 13 04:37:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602200301_pi300-10000_cl_pass0_src2.csv
[Tue Mar 13 04:37:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602200301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602200301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 04:37:25 2012] fullrun_pn_xmm0602200301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Mar 13 04:37:25 2012] fullrun_pn_xmm0602200301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Mar 13 04:37:25 2012] Fit fullrun_pn_xmm0602200301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Mar 13 05:11:11 2012] Spatial fit model total counts = 2945.060000, observed total counts = 2846.000000
[Tue Mar 13 05:11:11 2012] Offset between fit and detection position for source 2 = 0.230842 pixels
[Tue Mar 13 05:11:11 2012] 2943.512000 total counts/ 935.152000 bgd. counts: snr = 65.675057
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.230842 pixels
  Position = (327.9, 384.7) = 11 45 5.21 19 36 22.8
  Extent = 5.8 (5.5-6.0)", rotation angle = 0
  Source counts = 2008.4 +/- 54.3
  Background counts = 935.2
  Rate = 0.6 +/- 0.01
[Tue Mar 13 05:11:11 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 05:11:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 05:11:11 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 05:11:11 2012] Source does appear to be extended
[Tue Mar 13 05:11:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 05:11:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 05:11:25 2012] Initial guess for spatial extent in simple fitting = 5.75"
[Tue Mar 13 05:11:25 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.205
[Tue Mar 13 05:11:25 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.75"
[Tue Mar 13 05:22:39 2012] fullrun_pn_xmm0602200301_pi300-10000_cl_pass1_src2.ximg exists
[Tue Mar 13 05:22:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602200301_pi300-10000_cl_pass1_src2.csv
[Tue Mar 13 05:22:39 2012] fullrun_pn_xmm0602200301_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Mar 13 05:22:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602200301_pi300-10000_cl_pass1_src2.csv
[Tue Mar 13 05:22:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602200301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602200301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 05:22:39 2012] fullrun_pn_xmm0602200301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Mar 13 05:22:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602200301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Mar 13 05:22:39 2012] fullrun_pn_xmm0602200301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Mar 13 05:22:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602200301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Mar 13 05:22:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602200301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602200301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 05:51:42 2012] Warning, spatial fit 2 centroid is now closest to src. 3
[Tue Mar 13 05:51:42 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 05:51:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 05:51:42 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 05:51:42 2012] Source does appear to be extended
[Tue Mar 13 05:51:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 05:51:55 2012] Counts = 2008.360000, rescaling region sizes by 2.000000
[Tue Mar 13 05:51:55 2012] XMMSAS src. selection expression = ellipse(28474.549960, 33421.669600, 690.195620, 690.195620, 0.000000, X, Y)
[Tue Mar 13 05:51:55 2012] Writing source region out to fullrun_pn_xmm0602200301_pi300-10000_pass1_cl_src2_src.reg
[Tue Mar 13 05:51:55 2012] Extracting stamp from image fullrun_pn_xmm0602200301_pi300-10000_cl_sm2.00.img.gz, (288, 345) - (368, 424)
[Tue Mar 13 05:51:55 2012] XMMSAS bgd. selection expression = annulus(28474.549960, 33421.669600, 2300.652066, 4601.304132, X, Y) && !ellipse(27739.838440, 32800.876526, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 13 05:51:55 2012] Writing fullrun_pn_xmm0602200301_pi300-10000_pass1_cl_src2.gif
[Tue Mar 13 05:53:22 2012] Mean detx,y = (-6963.31, 6752.60) 
[Tue Mar 13 05:53:25 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 13 05:54:20 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 13 05:54:21 2012] Setting source spectrum file to fullrun_pn_xmm0602200301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 13 05:54:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0602200301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Mar 13 06:18:22 2012] Updating aperture counts using extracted products
[Tue Mar 13 06:18:22 2012] Error reading totcts from fullrun_pn_xmm0602200301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 13 06:18:22 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 06:18:22 2012] Using photon index=1.80, rate=0.553, arf fullrun_pn_xmm0602200301_pi300-10000_pass1_cl_src2.arf
[Tue Mar 13 06:18:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 06:18:22 2012] Updating source flux to 2.6e-12
[Tue Mar 13 06:18:51 2012] Reading fit data from xmm0602200301/analysis//spectral/fullrun_pn_xmm0602200301_pi300-10000_pass1_cl_src2_pl.csv
[Tue Mar 13 06:18:51 2012] Spectral fit parameter nH value = 4.11268e+20
[Tue Mar 13 06:18:51 2012] Spectral fit parameter PhoIndex value = 2.43743
[Tue Mar 13 06:18:51 2012] Failed to get F(0.3-8.0) from xmm0602200301/analysis//spectral/fullrun_pn_xmm0602200301_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Mar 13 06:18:51 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 06:18:51 2012] Using Nh = 4.1e+20, photon index=2.44, rate=0.553, arf fullrun_pn_xmm0602200301_pi300-10000_pass1_cl_src2.arf
[Tue Mar 13 06:18:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 06:18:51 2012] Updating source flux to 2e-12