[Tue Mar 13 04:14:45 2012] Detection parameters:
  Position = (348.6, 257.6) = 11 44 58.83 19 27 9.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 203.3 +/- 21.1
  Background counts = 79.2
  Rate = 0.01 +/- 0.001

[Tue Mar 13 04:14:46 2012] Off-axis axis estimate = 4.69'
[Tue Mar 13 04:47:39 2012] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 04:47:39 2012] Initial guess for spatial extent in simple fitting = 8.77"
[Tue Mar 13 04:47:39 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.986
[Tue Mar 13 04:47:39 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.77"
[Tue Mar 13 05:11:08 2012] fullrun_mos2_xmm0602200301_pi300-10000_cl_pass0_src2.ximg exists
[Tue Mar 13 05:11:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0602200301_pi300-10000_cl_pass0_src2.csv
[Tue Mar 13 05:11:08 2012] fullrun_mos2_xmm0602200301_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Mar 13 05:11:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0602200301_pi300-10000_cl_pass0_src2.csv
[Tue Mar 13 05:11:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602200301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602200301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 05:11:08 2012] fullrun_mos2_xmm0602200301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Mar 13 05:11:08 2012] fullrun_mos2_xmm0602200301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Mar 13 05:11:08 2012] Fit fullrun_mos2_xmm0602200301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Mar 13 05:11:16 2012] Spatial fit model total counts = 345.000000, observed total counts = 345.000000
[Tue Mar 13 05:11:16 2012] Offset between fit and detection position for source 8 = 0.113853 pixels
[Tue Mar 13 05:11:16 2012] 345.262100 total counts/ 251.918000 bgd. counts: snr = 5.881083
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.113853 pixels
  Position = (348.7, 257.5) = 11 44 58.81 19 27 9.5
  Extent = 4.3 (3.4-5.2)", rotation angle = 0
  Source counts = 93.3 +/- 18.6
  Background counts = 251.9
  Rate = 0.006 +/- 0.001
[Tue Mar 13 05:11:16 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 05:11:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 05:11:16 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 05:11:16 2012] Source does appear to be extended
[Tue Mar 13 05:11:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 05:34:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 05:34:15 2012] Initial guess for spatial extent in simple fitting = 4.31"
[Tue Mar 13 05:34:15 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.012
[Tue Mar 13 05:34:15 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 4.31"
[Tue Mar 13 05:51:39 2012] fullrun_mos2_xmm0602200301_pi300-10000_cl_pass1_src2.ximg exists
[Tue Mar 13 05:51:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602200301_pi300-10000_cl_pass1_src2.csv
[Tue Mar 13 05:51:39 2012] fullrun_mos2_xmm0602200301_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Mar 13 05:51:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602200301_pi300-10000_cl_pass1_src2.csv
[Tue Mar 13 05:51:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602200301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602200301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 05:51:39 2012] fullrun_mos2_xmm0602200301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Mar 13 05:51:39 2012] fullrun_mos2_xmm0602200301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Mar 13 05:51:39 2012] Fit fullrun_mos2_xmm0602200301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Mar 13 05:51:48 2012] Spatial fit model total counts = 344.522000, observed total counts = 345.000000
[Tue Mar 13 05:51:48 2012] Offset between fit and detection position for source 8 = 0.005655 pixels
[Tue Mar 13 05:51:48 2012] 344.780400 total counts/ 251.496000 bgd. counts: snr = 5.882250
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.005655 pixels
  Position = (348.7, 257.5) = 11 44 58.81 19 27 9.5
  Extent = 4.3 (3.4-5.2)", rotation angle = 0
  Source counts = 93.3 +/- 18.6
  Background counts = 251.5
  Rate = 0.006 +/- 0.001
[Tue Mar 13 05:51:48 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 05:51:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 05:51:48 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 05:51:48 2012] Source does appear to be extended
[Tue Mar 13 05:51:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 06:08:31 2012] XMMSAS src. selection expression = ellipse(30289.322000, 22355.658200, 258.233407, 258.233407, 0.000000, X, Y)
[Tue Mar 13 06:08:31 2012] Writing source region out to fullrun_mos2_xmm0602200301_pi300-10000_pass1_cl_src8_src.reg
[Tue Mar 13 06:08:31 2012] Extracting stamp from image fullrun_mos2_xmm0602200301_pi300-10000_cl_sm2.00.img.gz, (334, 243) - (364, 272)
[Tue Mar 13 06:08:31 2012] XMMSAS bgd. selection expression = annulus(30289.322000, 22355.658200, 430.389012, 860.778025, X, Y)
[Tue Mar 13 06:08:31 2012] Writing fullrun_mos2_xmm0602200301_pi300-10000_pass1_cl_src8.gif
[Tue Mar 13 06:12:11 2012] Mean detx,y = (3302.34, 3602.30) 
[Tue Mar 13 06:12:14 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 13 06:12:27 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 13 06:12:27 2012] Setting source spectrum file to fullrun_mos2_xmm0602200301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Mar 13 06:12:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602200301_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Tue Mar 13 06:16:47 2012] Not generating rmf since there are only 93 counts
[Tue Mar 13 06:16:47 2012] rmf not generated due to insufficient counts
[Tue Mar 13 06:18:23 2012] Updating aperture counts using extracted products
[Tue Mar 13 06:18:23 2012] Error reading totcts from fullrun_mos2_xmm0602200301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Mar 13 06:18:23 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 06:18:23 2012] Using photon index=1.80, rate=0.00615, arf fullrun_mos2_xmm0602200301_pi300-10000_pass1_cl_src8.arf
[Tue Mar 13 06:18:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 06:18:23 2012] Updating source flux to 1.1e-13
[Tue Mar 13 06:18:40 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Mar 13 06:18:41 2012] xmm0602200301/analysis//spectral/fullrun_mos2_xmm0602200301_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete