[Fri Mar 16 08:31:13 2012] Detection parameters:
  Position = (281.6, 375.3) = 11 43 23.87 19 34 47.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.6 +/- 8.4
  Background counts = 9.9
  Rate = 0.004 +/- 0.0008

[Fri Mar 16 08:31:14 2012] Off-axis axis estimate = 5.70'
[Fri Mar 16 09:14:45 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 09:14:45 2012] Initial guess for spatial extent in simple fitting = 9.28"
[Fri Mar 16 09:14:45 2012] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.865
[Fri Mar 16 09:14:45 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.28"
[Fri Mar 16 09:39:12 2012] fullrun_mos2_xmm0602200201_pi300-10000_cl_pass0_src6.ximg exists
[Fri Mar 16 09:39:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602200201_pi300-10000_cl_pass0_src6.csv
[Fri Mar 16 09:39:12 2012] fullrun_mos2_xmm0602200201_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Mar 16 09:39:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602200201_pi300-10000_cl_pass0_src6.csv
[Fri Mar 16 09:39:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602200201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602200201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 09:39:12 2012] fullrun_mos2_xmm0602200201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Mar 16 09:39:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602200201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Mar 16 09:39:12 2012] fullrun_mos2_xmm0602200201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Mar 16 09:39:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602200201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Mar 16 09:39:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602200201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602200201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 09:39:22 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 11.157943 pixels away
[Fri Mar 16 09:39:22 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 09:39:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 09:39:22 2012] Assessing source extent using major
[Fri Mar 16 09:39:22 2012] Source does appear to be extended
[Fri Mar 16 09:39:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 10:29:16 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 10:29:16 2012] Initial guess for spatial extent in simple fitting = 9.28"
[Fri Mar 16 10:29:16 2012] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.865
[Fri Mar 16 10:29:16 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.28"
[Fri Mar 16 11:05:11 2012] fullrun_mos2_xmm0602200201_pi300-10000_cl_pass1_src6.ximg exists
[Fri Mar 16 11:05:11 2012] fullrun_mos2_xmm0602200201_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Mar 16 11:05:11 2012] Fit fullrun_mos2_xmm0602200201_pi300-10000_cl_pass1_src6 appears to have run properly
[Fri Mar 16 11:05:11 2012] fullrun_mos2_xmm0602200201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Mar 16 11:05:11 2012] fullrun_mos2_xmm0602200201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Mar 16 11:05:11 2012] Fit fullrun_mos2_xmm0602200201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Mar 16 11:05:27 2012] Spatial fit model total counts = 124.025000, observed total counts = 119.000000
[Fri Mar 16 11:05:27 2012] Offset between fit and detection position for source 7 = 0.132287 pixels
[Fri Mar 16 11:05:27 2012] 125.608900 total counts/ 100.867000 bgd. counts: snr = 2.463534
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.132287 pixels
  Position = (281.5, 375.2) = 11 43 23.90 19 34 46.5
  Extent = 4.0 (2.8-6.4)", rotation angle = 0
  Source counts = 24.7 +/- 11.2
  Background counts = 100.9
  Rate = 0.002 +/- 0.0008
[Fri Mar 16 11:05:27 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 11:05:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 11:05:27 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 11:05:27 2012] Source does appear to be extended
[Fri Mar 16 11:05:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 11:32:36 2012] XMMSAS src. selection expression = ellipse(24439.011600, 32597.747200, 239.976007, 239.976007, 0.000000, X, Y)
[Fri Mar 16 11:32:36 2012] Writing source region out to fullrun_mos2_xmm0602200201_pi300-10000_pass1_cl_src7_src.reg
[Fri Mar 16 11:32:36 2012] Extracting stamp from image fullrun_mos2_xmm0602200201_pi300-10000_cl_sm2.00.img.gz, (268, 361) - (295, 389)
[Fri Mar 16 11:32:36 2012] XMMSAS bgd. selection expression = annulus(24439.011600, 32597.747200, 399.960012, 799.920023, X, Y)
[Fri Mar 16 11:32:36 2012] Writing fullrun_mos2_xmm0602200201_pi300-10000_pass1_cl_src7.gif
[Fri Mar 16 11:34:36 2012] Mean detx,y = (90.09, 5121.46) 
[Fri Mar 16 11:34:38 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 11:34:53 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 11:34:53 2012] Setting source spectrum file to fullrun_mos2_xmm0602200201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Mar 16 11:34:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602200201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Mar 16 11:40:26 2012] Not generating rmf since there are only 24 counts
[Fri Mar 16 11:40:26 2012] rmf not generated due to insufficient counts
[Fri Mar 16 11:41:56 2012] Updating aperture counts using extracted products
[Fri Mar 16 11:41:56 2012] Error reading totcts from fullrun_mos2_xmm0602200201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Mar 16 11:41:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 11:41:58 2012] Using photon index=1.80, rate=0.00182, arf fullrun_mos2_xmm0602200201_pi300-10000_pass1_cl_src7.arf
[Fri Mar 16 11:41:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 11:41:58 2012] Updating source flux to 3.6e-14
[Fri Mar 16 11:42:00 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Mar 16 11:42:01 2012] xmm0602200201/analysis//spectral/fullrun_mos2_xmm0602200201_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete