[Fri Mar 16 08:30:50 2012] Detection parameters:
  Position = (281.7, 376.0) = 11 43 23.82 19 34 51.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.8 +/- 8.8
  Background counts = 9.1
  Rate = 0.003 +/- 0.0008

[Fri Mar 16 08:30:51 2012] Off-axis axis estimate = 5.75'
[Fri Mar 16 09:03:37 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 09:03:37 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Fri Mar 16 09:03:37 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.077
[Fri Mar 16 09:03:37 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.31"
[Fri Mar 16 09:14:45 2012] fullrun_mos1_xmm0602200201_pi300-10000_cl_pass0_src5.ximg exists
[Fri Mar 16 09:14:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602200201_pi300-10000_cl_pass0_src5.csv
[Fri Mar 16 09:14:45 2012] fullrun_mos1_xmm0602200201_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Mar 16 09:14:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602200201_pi300-10000_cl_pass0_src5.csv
[Fri Mar 16 09:14:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602200201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602200201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 09:14:45 2012] fullrun_mos1_xmm0602200201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Mar 16 09:14:45 2012] fullrun_mos1_xmm0602200201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Mar 16 09:14:45 2012] Fit fullrun_mos1_xmm0602200201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Mar 16 09:39:19 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.640705 pixels away
[Fri Mar 16 09:39:19 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 09:39:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 09:39:19 2012] Assessing source extent using major
[Fri Mar 16 09:39:19 2012] Source does appear to be extended
[Fri Mar 16 09:39:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 10:12:52 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 10:12:52 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Fri Mar 16 10:12:52 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.077
[Fri Mar 16 10:12:52 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.31"
[Fri Mar 16 10:29:16 2012] fullrun_mos1_xmm0602200201_pi300-10000_cl_pass1_src5.ximg exists
[Fri Mar 16 10:29:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602200201_pi300-10000_cl_pass1_src5.csv
[Fri Mar 16 10:29:16 2012] fullrun_mos1_xmm0602200201_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Mar 16 10:29:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602200201_pi300-10000_cl_pass1_src5.csv
[Fri Mar 16 10:29:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602200201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602200201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 10:29:16 2012] fullrun_mos1_xmm0602200201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Mar 16 10:29:16 2012] fullrun_mos1_xmm0602200201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Mar 16 10:29:16 2012] Fit fullrun_mos1_xmm0602200201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Mar 16 11:05:22 2012] Spatial fit model total counts = 128.996000, observed total counts = 129.000000
[Fri Mar 16 11:05:22 2012] Offset between fit and detection position for source 4 = 0.219276 pixels
[Fri Mar 16 11:05:22 2012] 129.295000 total counts/ 106.539000 bgd. counts: snr = 2.204660
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.219276 pixels
  Position = (281.5, 376.1) = 11 43 23.89 19 34 50.2
  Extent = 4.9 (2.9-9.0)", rotation angle = 0
  Source counts = 22.8 +/- 11.4
  Background counts = 106.5
  Rate = 0.002 +/- 0.0008
[Fri Mar 16 11:05:22 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 11:05:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 11:05:22 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 11:05:22 2012] Source does appear to be extended
[Fri Mar 16 11:05:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 11:29:16 2012] XMMSAS src. selection expression = ellipse(24442.871200, 32670.965200, 291.553808, 291.553808, 0.000000, X, Y)
[Fri Mar 16 11:29:16 2012] Writing source region out to fullrun_mos1_xmm0602200201_pi300-10000_pass1_cl_src4_src.reg
[Fri Mar 16 11:29:16 2012] Extracting stamp from image fullrun_mos1_xmm0602200201_pi300-10000_cl_sm2.00.img.gz, (265, 359) - (298, 393)
[Fri Mar 16 11:29:16 2012] XMMSAS bgd. selection expression = annulus(24442.871200, 32670.965200, 485.923014, 971.846028, X, Y)
[Fri Mar 16 11:29:16 2012] Writing fullrun_mos1_xmm0602200201_pi300-10000_pass1_cl_src4.gif
[Fri Mar 16 11:31:17 2012] Mean detx,y = (5422.95, -220.18) 
[Fri Mar 16 11:31:20 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 11:31:31 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 11:31:32 2012] Setting source spectrum file to fullrun_mos1_xmm0602200201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Mar 16 11:31:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602200201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Mar 16 11:32:23 2012] Not generating rmf since there are only 22 counts
[Fri Mar 16 11:32:23 2012] rmf not generated due to insufficient counts
[Fri Mar 16 11:41:55 2012] Updating aperture counts using extracted products
[Fri Mar 16 11:41:55 2012] Error reading totcts from fullrun_mos1_xmm0602200201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Mar 16 11:41:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 11:41:55 2012] Using photon index=1.80, rate=0.00167, arf fullrun_mos1_xmm0602200201_pi300-10000_pass1_cl_src4.arf
[Fri Mar 16 11:41:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 11:41:55 2012] Updating source flux to 2.8e-14
[Fri Mar 16 11:41:59 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Mar 16 11:42:00 2012] xmm0602200201/analysis//spectral/fullrun_mos1_xmm0602200201_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete