[Tue Dec 27 15:57:09 2011] Detection parameters:
  Position = (206.4, 430.9) = 9 42 59.56 47 0 7.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.9 +/- 15.3
  Background counts = 53.1
  Rate = 0.001 +/- 0.0003

[Tue Dec 27 15:57:10 2011] Off-axis axis estimate = 11.69'
[Tue Dec 27 17:59:31 2011] Using EEF radius (= 12.27 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 17:59:31 2011] Initial guess for spatial extent in simple fitting = 12.27"
[Tue Dec 27 17:59:31 2011] source mask rpix=2.8, npix_max = 44, mask sum = 40, frac = 0.906
[Tue Dec 27 17:59:31 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 12.27"
[Tue Dec 27 20:47:07 2011] fullrun_mos1_xmm0602060101_pi300-10000_cl_pass0_src20.ximg exists
[Tue Dec 27 20:47:07 2011] fullrun_mos1_xmm0602060101_pi300-10000_cl_pass0_src20_1.ximg exists
[Tue Dec 27 20:47:07 2011] Fit fullrun_mos1_xmm0602060101_pi300-10000_cl_pass0_src20 appears to have run properly
[Tue Dec 27 20:47:08 2011] fullrun_mos1_xmm0602060101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Tue Dec 27 20:47:08 2011] fullrun_mos1_xmm0602060101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Tue Dec 27 20:47:08 2011] Fit fullrun_mos1_xmm0602060101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Tue Dec 27 23:51:11 2011] Source 10 is offset by -7.210017 and -3.751673 pixels which is larger than
2 X fitted extent = 1.392556 x 1.392556, not incorporating fit results
[Tue Dec 27 23:51:11 2011] Warning, spatial fit 20 centroid is now closest to src. 6
[Tue Dec 27 23:51:11 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 23:51:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 23:51:11 2011] Assessing source extent using major
[Tue Dec 27 23:51:11 2011] Source does appear to be extended
[Tue Dec 27 23:51:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 23:51:11 2011] Source is confused with source 11
[Wed Dec 28 02:13:13 2011] Using EEF radius (= 12.27 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 02:13:13 2011] Initial guess for spatial extent in simple fitting = 12.27"
[Wed Dec 28 02:13:13 2011] source mask rpix=2.8, npix_max = 44, mask sum = 40, frac = 0.906
[Wed Dec 28 02:13:13 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 12.27"
[Wed Dec 28 05:20:54 2011] fullrun_mos1_xmm0602060101_pi300-10000_cl_pass1_src19.ximg exists
[Wed Dec 28 05:20:54 2011] fullrun_mos1_xmm0602060101_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed Dec 28 05:20:54 2011] Fit fullrun_mos1_xmm0602060101_pi300-10000_cl_pass1_src19 appears to have run properly
[Wed Dec 28 05:20:55 2011] fullrun_mos1_xmm0602060101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed Dec 28 05:20:55 2011] fullrun_mos1_xmm0602060101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Dec 28 05:20:55 2011] Fit fullrun_mos1_xmm0602060101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Dec 28 08:15:39 2011] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.386453 pixels away
[Wed Dec 28 08:15:39 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 08:15:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 08:15:39 2011] Assessing source extent using major
[Wed Dec 28 08:15:39 2011] Source does appear to be extended
[Wed Dec 28 08:15:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 09:49:52 2011] XMMSAS src. selection expression = ellipse(17910.946533, 37438.822418, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Dec 28 09:49:52 2011] Writing source region out to fullrun_mos1_xmm0602060101_pi300-10000_pass1_cl_src10_src.reg
[Wed Dec 28 09:49:52 2011] Extracting stamp from image fullrun_mos1_xmm0602060101_pi300-10000_cl_sm2.00.img.gz, (169, 393) - (244, 468)
[Wed Dec 28 09:49:52 2011] XMMSAS bgd. selection expression = annulus(17910.946533, 37438.822418, 1087.500000, 2175.000000, X, Y) && !ellipse(18414.697460, 38401.665200, 349.304810, 349.304810, 0.000000, X, Y) && !ellipse(18277.072418, 36060.968414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16564.972794, 36845.826935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18389.672211, 37015.594818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16733.391922, 37262.018707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19060.752000, 37395.456000, 1819.408052, 1819.408052, 0.000000, X, Y) && !ellipse(16882.470200, 36792.910000, 2001.664058, 2001.664058, 0.000000, X, Y) && !ellipse(18195.440887, 36480.213470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17660.514000, 36294.760000, 4003.328115, 4003.328115, 0.000000, X, Y)
[Wed Dec 28 09:49:52 2011] Writing fullrun_mos1_xmm0602060101_pi300-10000_pass1_cl_src10.gif
[Wed Dec 28 10:07:30 2011] Mean detx,y = (12525.41, -2536.42) 
[Wed Dec 28 10:07:35 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 10:08:19 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 10:08:19 2011] Setting source spectrum file to fullrun_mos1_xmm0602060101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Dec 28 10:08:19 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0602060101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Dec 28 11:10:00 2011] Not generating rmf since there are only 65 counts
[Wed Dec 28 11:10:00 2011] rmf not generated due to insufficient counts
[Wed Dec 28 13:12:06 2011] Updating aperture counts using extracted products
[Wed Dec 28 13:12:06 2011] Error reading totcts from fullrun_mos1_xmm0602060101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Dec 28 13:12:08 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 13:12:08 2011] Using photon index=1.80, rate=0.00146, arf fullrun_mos1_xmm0602060101_pi300-10000_pass1_cl_src10.arf
[Wed Dec 28 13:12:08 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 13:12:08 2011] Updating source flux to 3e-14
[Wed Dec 28 13:12:15 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting