[Thu May 17 09:24:45 2012] Detection parameters:
  Position = (248.8, 498.3) = 16 55 22.04 -40 56 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.8 +/- 13.5
  Background counts = 44.4
  Rate = 0.002 +/- 0.0004

[Thu May 17 09:24:45 2012] Off-axis axis estimate = 14.93'
[Thu May 17 09:30:08 2012] Using EEF radius (= 13.89 ")to estimate initial spatial extent for simple fitting
[Thu May 17 09:30:08 2012] Initial guess for spatial extent in simple fitting = 13.89"
[Thu May 17 09:30:08 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.026
[Thu May 17 09:30:08 2012] Giving source the simple spatial ID 83 for pass 0, mean size = 13.89"
[Thu May 17 13:59:43 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_src83.ximg exists
[Thu May 17 13:59:43 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_src83.csv
[Thu May 17 13:59:43 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_src83_1.ximg exists
[Thu May 17 13:59:43 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_src83.csv
[Thu May 17 13:59:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 13:59:45 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Thu May 17 13:59:45 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src83.csv
[Thu May 17 13:59:45 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Thu May 17 13:59:45 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src83.csv
[Thu May 17 13:59:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 17:07:37 2012] Spatial fit model total counts = -2587.280000, observed total counts = 610.000000
[Thu May 17 17:07:37 2012] Poor agreement between spatial fit and data for source 84
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 17 17:07:38 2012] Warning, spatial fit 83 centroid is now closest to src. 33
[Thu May 17 17:07:38 2012] Vigneting correction estimate = 1.000000
[Thu May 17 17:07:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 17:07:38 2012] Assessing source extent using major
[Thu May 17 17:07:38 2012] Source does appear to be extended
[Thu May 17 17:07:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 17:07:38 2012] Source is confused with source 33
[Thu May 17 17:08:27 2012] Using EEF radius (= 13.89 ")to estimate initial spatial extent for simple fitting
[Thu May 17 17:08:27 2012] Initial guess for spatial extent in simple fitting = 13.89"
[Thu May 17 17:08:27 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.026
[Thu May 17 17:08:27 2012] Giving source the simple spatial ID 82 for pass 1, mean size = 13.89"
[Thu May 17 21:11:47 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_src82.ximg exists
[Thu May 17 21:11:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_src82.csv
[Thu May 17 21:11:47 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_src82_1.ximg exists
[Thu May 17 21:11:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_src82.csv
[Thu May 17 21:11:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 21:11:49 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src82.ximg exists
[Thu May 17 21:11:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src82.csv
[Thu May 17 21:11:49 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src82_1.ximg exists
[Thu May 17 21:11:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src82.csv
[Thu May 17 21:11:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 00:01:34 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 84 at 11.642074 pixels away
[Fri May 18 00:01:34 2012] Warning, spatial fit 82 centroid is now closest to src. 33
[Fri May 18 00:01:34 2012] Vigneting correction estimate = 1.000000
[Fri May 18 00:01:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 00:01:34 2012] Assessing source extent using major
[Fri May 18 00:01:34 2012] Source does appear to be extended
[Fri May 18 00:01:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 00:02:24 2012] XMMSAS src. selection expression = ellipse(21597.688354, 43300.561584, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 18 00:02:24 2012] Writing source region out to fullrun_pn_xmm0602020101_pi300-10000_pass1_cl_src84_src.reg
[Fri May 18 00:02:24 2012] Extracting stamp from image fullrun_pn_xmm0602020101_pi300-10000_cl_sm2.00.img.gz, (211, 461) - (286, 536)
[Fri May 18 00:02:24 2012] XMMSAS bgd. selection expression = annulus(21597.688354, 43300.561584, 1087.500000, 2175.000000, X, Y) && !ellipse(21060.739212, 43434.900757, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 18 00:02:24 2012] Writing fullrun_pn_xmm0602020101_pi300-10000_pass1_cl_src84.gif
[Fri May 18 01:54:39 2012] Mean detx,y = (-4250.72, -16139.66) 
[Fri May 18 01:54:46 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 01:55:38 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 01:55:38 2012] Setting source spectrum file to fullrun_pn_xmm0602020101_pi300-10000_pass1_cl_src84_src_b10.pi.gz
[Fri May 18 01:55:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0602020101_pi300-10000_pass1_cl_src84_bgd.pi.gz
[Fri May 18 02:54:19 2012] Not generating rmf since there are only 60 counts
[Fri May 18 02:54:19 2012] rmf not generated due to insufficient counts
[Fri May 18 04:18:03 2012] Updating aperture counts using extracted products
[Fri May 18 04:18:03 2012] Error reading totcts from fullrun_pn_xmm0602020101_pi300-10000_pass1_cl_src84_src_b10.pi.gz
[Fri May 18 04:18:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 04:18:09 2012] Using photon index=1.80, rate=0.00174, arf fullrun_pn_xmm0602020101_pi300-10000_pass1_cl_src84.arf
[Fri May 18 04:18:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 04:18:09 2012] Updating source flux to 1.9e-14
[Fri May 18 04:19:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting