[Thu May 17 09:24:44 2012] Detection parameters:
  Position = (326.6, 321.3) = 16 54 52.16 -41 8 49.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.3 +/- 19.0
  Background counts = 55.4
  Rate = 0.006 +/- 0.0006

[Thu May 17 09:24:45 2012] Off-axis axis estimate = 2.63'
[Thu May 17 09:30:08 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Thu May 17 09:30:08 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Thu May 17 09:30:08 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.203
[Thu May 17 09:30:08 2012] Giving source the simple spatial ID 62 for pass 0, mean size = 7.74"
[Thu May 17 13:59:43 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_src62.ximg exists
[Thu May 17 13:59:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_src62.csv
[Thu May 17 13:59:43 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_src62_1.ximg exists
[Thu May 17 13:59:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_src62.csv
[Thu May 17 13:59:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 13:59:44 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Thu May 17 13:59:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src62.csv
[Thu May 17 13:59:44 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Thu May 17 13:59:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src62.csv
[Thu May 17 13:59:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 17:07:38 2012] Warning: source 62 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 63 at 10.227328 pixels away
[Thu May 17 17:07:38 2012] Vigneting correction estimate = 1.000000
[Thu May 17 17:07:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 17:07:38 2012] Assessing source extent using major
[Thu May 17 17:07:38 2012] Source does appear to be extended
[Thu May 17 17:07:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 17:08:27 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Thu May 17 17:08:27 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Thu May 17 17:08:27 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.203
[Thu May 17 17:08:27 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 7.74"
[Thu May 17 21:11:47 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_src61.ximg exists
[Thu May 17 21:11:47 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_src61_1.ximg exists
[Thu May 17 21:11:47 2012] Fit fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_src61 appears to have run properly
[Thu May 17 21:11:49 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Thu May 17 21:11:49 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Thu May 17 21:11:49 2012] Fit fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Fri May 18 00:01:34 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 63 at 22.748734 pixels away
[Fri May 18 00:01:34 2012] Warning: source 61 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 63 at 10.227328 pixels away
[Fri May 18 00:01:34 2012] Source 63 is offset by 2.319136 and 3.738404 pixels which is larger than
2 X fitted extent = 0.720680 x 0.720680, not incorporating fit results
[Fri May 18 00:01:34 2012] Vigneting correction estimate = 1.000000
[Fri May 18 00:01:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 00:01:34 2012] Assessing source extent using major
[Fri May 18 00:01:34 2012] Source does appear to be extended
[Fri May 18 00:01:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 00:02:24 2012] XMMSAS src. selection expression = ellipse(28361.672852, 27902.581116, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 18 00:02:24 2012] Writing source region out to fullrun_pn_xmm0602020101_pi300-10000_pass1_cl_src63_src.reg
[Fri May 18 00:02:24 2012] Extracting stamp from image fullrun_pn_xmm0602020101_pi300-10000_cl_sm2.00.img.gz, (289, 284) - (364, 359)
[Fri May 18 00:02:24 2012] XMMSAS bgd. selection expression = annulus(28361.672852, 27902.581116, 1087.500000, 2175.000000, X, Y) && !ellipse(26916.249780, 27640.711400, 434.986413, 434.986413, 0.000000, X, Y) && !ellipse(28089.513763, 29887.794312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26905.012268, 29540.935974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31061.739410, 28348.549042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31301.727509, 27659.377777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28634.204400, 27039.292200, 501.592814, 501.592814, 0.000000, X, Y) && !ellipse(28447.228200, 26339.647000, 483.872014, 483.872014, 0.000000, X, Y) && !ellipse(27088.422600, 26312.502800, 346.960010, 346.960010, 0.000000, X, Y) && !ellipse(31354.313019, 25337.501556, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 18 00:02:24 2012] Writing fullrun_pn_xmm0602020101_pi300-10000_pass1_cl_src63.gif
[Fri May 18 01:26:57 2012] Mean detx,y = (1524.40, -334.00) 
[Fri May 18 01:27:04 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 01:27:56 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 01:27:57 2012] Setting source spectrum file to fullrun_pn_xmm0602020101_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Fri May 18 01:27:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0602020101_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Fri May 18 02:44:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 18 02:44:26 2012] rmf not generated due to insufficient counts
[Fri May 18 04:18:02 2012] Updating aperture counts using extracted products
[Fri May 18 04:18:02 2012] Error reading totcts from fullrun_pn_xmm0602020101_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Fri May 18 04:18:07 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 04:18:07 2012] Using photon index=1.80, rate=0.00559, arf fullrun_pn_xmm0602020101_pi300-10000_pass1_cl_src63.arf
[Fri May 18 04:18:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 04:18:08 2012] Updating source flux to 1.8e-14
[Fri May 18 04:19:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting