[Thu May 17 09:24:44 2012] Detection parameters:
  Position = (433.3, 304.2) = 16 54 11.05 -41 10 4.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 258.7 +/- 22.2
  Background counts = 54.3
  Rate = 0.01 +/- 0.001

[Thu May 17 09:24:45 2012] Off-axis axis estimate = 9.78'
[Thu May 17 09:30:08 2012] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Thu May 17 09:30:08 2012] Initial guess for spatial extent in simple fitting = 11.32"
[Thu May 17 09:30:08 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.935
[Thu May 17 09:30:08 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 11.32"
[Thu May 17 13:59:42 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_src25.ximg exists
[Thu May 17 13:59:42 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu May 17 13:59:42 2012] Fit fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_src25 appears to have run properly
[Thu May 17 13:59:44 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu May 17 13:59:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu May 17 13:59:44 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu May 17 13:59:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu May 17 13:59:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 17:07:37 2012] Source 26 is offset by -5.401776 and -7.410402 pixels which is larger than
2 X fitted extent = 1.240331 x 1.240331, not incorporating fit results
[Thu May 17 17:07:38 2012] Warning: source 66 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 14.661865 pixels away
[Thu May 17 17:07:38 2012] Vigneting correction estimate = 1.000000
[Thu May 17 17:07:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 17:07:38 2012] Assessing source extent using major
[Thu May 17 17:07:38 2012] Source does appear to be extended
[Thu May 17 17:07:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 17:08:27 2012] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Thu May 17 17:08:27 2012] Initial guess for spatial extent in simple fitting = 11.32"
[Thu May 17 17:08:27 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.935
[Thu May 17 17:08:27 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 11.32"
[Thu May 17 21:11:46 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_src25.ximg exists
[Thu May 17 21:11:46 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu May 17 21:11:46 2012] Fit fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_src25 appears to have run properly
[Thu May 17 21:11:48 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu May 17 21:11:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu May 17 21:11:48 2012] fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu May 17 21:11:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu May 17 21:11:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 00:01:34 2012] Spatial fit model total counts = 756.820000, observed total counts = 744.000000
[Fri May 18 00:01:34 2012] Offset between fit and detection position for source 26 = 0.163877 pixels
[Fri May 18 00:01:34 2012] 759.063000 total counts/ 582.056000 bgd. counts: snr = 7.336823
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.163877 pixels
  Position = (433.1, 304.3) = 16 54 11.11 -41 10 3.9
  Extent = 6.6" x 3.9", rotation angle = 103
  Source counts = 177.0 +/- 27.6
  Background counts = 582.1
  Rate = 0.005 +/- 0.0008
[Fri May 18 00:01:34 2012] Vigneting correction estimate = 1.000000
[Fri May 18 00:01:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 00:01:34 2012] Assessing source extent using major
[Fri May 18 00:01:34 2012] Source does appear to be extended
[Fri May 18 00:01:34 2012] Computing asymmetry using major and minor axis, asym = 1.68
[Fri May 18 00:01:34 2012] Source is asymmetric
[Fri May 18 00:02:23 2012] XMMSAS src. selection expression = ellipse(37632.010638, 26422.549202, 394.591570, 235.392109, 102.878047, X, Y)
[Fri May 18 00:02:23 2012] Writing source region out to fullrun_pn_xmm0602020101_pi300-10000_pass1_cl_src26_src.reg
[Fri May 18 00:02:23 2012] Extracting stamp from image fullrun_pn_xmm0602020101_pi300-10000_cl_sm2.00.img.gz, (410, 282) - (456, 327)
[Fri May 18 00:02:23 2012] XMMSAS bgd. selection expression = annulus(37632.010638, 26422.549202, 657.652616, 1315.305233, X, Y) && !ellipse(36123.664276, 26561.294830, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 18 00:02:23 2012] Writing fullrun_pn_xmm0602020101_pi300-10000_pass1_cl_src26.gif
[Fri May 18 00:35:37 2012] Mean detx,y = (10650.43, 1745.83) 
[Fri May 18 00:35:43 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 00:36:09 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 00:36:09 2012] Setting source spectrum file to fullrun_pn_xmm0602020101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri May 18 00:36:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0602020101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Fri May 18 04:18:00 2012] Updating aperture counts using extracted products
[Fri May 18 04:18:00 2012] Error reading totcts from fullrun_pn_xmm0602020101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri May 18 04:18:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 04:18:05 2012] Using photon index=1.80, rate=0.00505, arf fullrun_pn_xmm0602020101_pi300-10000_pass1_cl_src26.arf
[Fri May 18 04:18:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 04:18:05 2012] Updating source flux to 3.5e-14
[Fri May 18 04:19:22 2012] Flag b found in src. 26 procflags, skipping spectral fitting