[Thu May 17 09:26:06 2012] Detection parameters:
  Position = (313.4, 463.7) = 16 54 57.24 -40 58 29.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.5 +/- 10.8
  Background counts = 17.0
  Rate = 0.002 +/- 0.0003

[Thu May 17 09:26:08 2012] Off-axis axis estimate = 12.03'
[Thu May 17 15:31:59 2012] Using EEF radius (= 12.44 ")to estimate initial spatial extent for simple fitting
[Thu May 17 15:31:59 2012] Initial guess for spatial extent in simple fitting = 12.44"
[Thu May 17 15:31:59 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.085
[Thu May 17 15:31:59 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 12.44"
[Thu May 17 17:07:10 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src30.ximg exists
[Thu May 17 17:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src30.csv
[Thu May 17 17:07:10 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu May 17 17:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src30.csv
[Thu May 17 17:07:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 17:07:10 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu May 17 17:07:10 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu May 17 17:07:10 2012] Fit fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Thu May 17 17:08:00 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.543893 pixels away
[Thu May 17 17:08:00 2012] Vigneting correction estimate = 1.000000
[Thu May 17 17:08:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 17:08:00 2012] Assessing source extent using major
[Thu May 17 17:08:00 2012] Source does appear to be extended
[Thu May 17 17:08:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 22:32:17 2012] Using EEF radius (= 12.44 ")to estimate initial spatial extent for simple fitting
[Thu May 17 22:32:17 2012] Initial guess for spatial extent in simple fitting = 12.44"
[Thu May 17 22:32:17 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.085
[Thu May 17 22:32:17 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 12.44"
[Fri May 18 00:01:06 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_src30.ximg exists
[Fri May 18 00:01:06 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_src30_1.ximg exists
[Fri May 18 00:01:06 2012] Fit fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_src30 appears to have run properly
[Fri May 18 00:01:06 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Fri May 18 00:01:06 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Fri May 18 00:01:06 2012] Fit fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Fri May 18 00:01:56 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 16.190311 pixels away
[Fri May 18 00:01:56 2012] Vigneting correction estimate = 1.000000
[Fri May 18 00:01:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 00:01:56 2012] Assessing source extent using major
[Fri May 18 00:01:56 2012] Source does appear to be extended
[Fri May 18 00:01:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 03:34:52 2012] XMMSAS src. selection expression = ellipse(27216.917145, 40289.601715, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 18 03:34:52 2012] Writing source region out to fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src4_src.reg
[Fri May 18 03:34:52 2012] Extracting stamp from image fullrun_mos2_xmm0602020101_pi300-10000_cl_sm2.00.img.gz, (276, 426) - (351, 501)
[Fri May 18 03:34:52 2012] XMMSAS bgd. selection expression = annulus(27216.917145, 40289.601715, 1087.500000, 2175.000000, X, Y)
[Fri May 18 03:34:52 2012] Writing fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src4.gif
[Fri May 18 03:51:57 2012] Mean detx,y = (-969.23, 12641.46) 
[Fri May 18 03:51:59 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 03:52:49 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 03:52:50 2012] Setting source spectrum file to fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May 18 03:52:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri May 18 04:15:35 2012] Not generating rmf since there are only 57 counts
[Fri May 18 04:15:35 2012] rmf not generated due to insufficient counts
[Fri May 18 04:18:14 2012] Updating aperture counts using extracted products
[Fri May 18 04:18:14 2012] Error reading totcts from fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May 18 04:18:16 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 04:18:16 2012] Using photon index=1.80, rate=0.00157, arf fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src4.arf
[Fri May 18 04:18:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 04:18:16 2012] Updating source flux to 4.6e-14
[Fri May 18 04:18:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting