[Thu May 17 09:26:07 2012] Detection parameters:
  Position = (407.2, 198.6) = 16 54 21.02 -41 17 45.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.9 +/- 10.9
  Background counts = 16.4
  Rate = 0.003 +/- 0.0006

[Thu May 17 09:26:08 2012] Off-axis axis estimate = 10.70'
[Thu May 17 15:31:59 2012] Using EEF radius (= 11.78 ")to estimate initial spatial extent for simple fitting
[Thu May 17 15:31:59 2012] Initial guess for spatial extent in simple fitting = 11.78"
[Thu May 17 15:31:59 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.020
[Thu May 17 15:31:59 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 11.78"
[Thu May 17 17:07:10 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src14.ximg exists
[Thu May 17 17:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src14.csv
[Thu May 17 17:07:10 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu May 17 17:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src14.csv
[Thu May 17 17:07:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 17:07:10 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu May 17 17:07:10 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu May 17 17:07:10 2012] Fit fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Thu May 17 17:08:00 2012] Spatial fit model total counts = 187.000000, observed total counts = 187.000000
[Thu May 17 17:08:00 2012] Offset between fit and detection position for source 31 = 0.634362 pixels
[Thu May 17 17:08:00 2012] 189.985000 total counts/ 148.102000 bgd. counts: snr = 3.441576
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.634362 pixels
  Position = (407.8, 198.6) = 16 54 20.77 -41 17 43.7
  Extent = 7.0 (4.8-9.7)", rotation angle = 0
  Source counts = 41.9 +/- 13.8
  Background counts = 148.1
  Rate = 0.001 +/- 0.0004
[Thu May 17 17:08:00 2012] Vigneting correction estimate = 1.000000
[Thu May 17 17:08:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 17:08:00 2012] Assessing source extent using major axis lower bound
[Thu May 17 17:08:00 2012] Source does appear to be extended
[Thu May 17 17:08:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 22:32:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 22:32:17 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Thu May 17 22:32:17 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.901
[Thu May 17 22:32:17 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 6.99"
[Fri May 18 00:01:06 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_src14.ximg exists
[Fri May 18 00:01:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_src14.csv
[Fri May 18 00:01:06 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri May 18 00:01:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_src14.csv
[Fri May 18 00:01:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 00:01:06 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri May 18 00:01:06 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri May 18 00:01:06 2012] Fit fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Fri May 18 00:01:56 2012] Spatial fit model total counts = 187.000000, observed total counts = 187.000000
[Fri May 18 00:01:56 2012] Offset between fit and detection position for source 31 = 0.000807 pixels
[Fri May 18 00:01:56 2012] 189.986900 total counts/ 148.138000 bgd. counts: snr = 3.438356
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.000807 pixels
  Position = (407.8, 198.6) = 16 54 20.77 -41 17 43.7
  Extent = 7.0 (4.8-9.7)", rotation angle = 0
  Source counts = 41.8 +/- 13.8
  Background counts = 148.1
  Rate = 0.001 +/- 0.0004
[Fri May 18 00:01:56 2012] Vigneting correction estimate = 1.000000
[Fri May 18 00:01:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 00:01:56 2012] Assessing source extent using major axis lower bound
[Fri May 18 00:01:56 2012] Source does appear to be extended
[Fri May 18 00:01:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 03:34:52 2012] XMMSAS src. selection expression = ellipse(35430.920800, 17231.889200, 419.099412, 419.099412, 0.000000, X, Y)
[Fri May 18 03:34:52 2012] Writing source region out to fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src31_src.reg
[Fri May 18 03:34:52 2012] Extracting stamp from image fullrun_mos2_xmm0602020101_pi300-10000_cl_sm2.00.img.gz, (384, 175) - (432, 223)
[Fri May 18 03:34:52 2012] XMMSAS bgd. selection expression = annulus(35430.920800, 17231.889200, 698.499020, 1396.998040, X, Y)
[Fri May 18 03:34:52 2012] Writing fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src31.gif
[Fri May 18 03:42:03 2012] Mean detx,y = (-7812.19, -10845.56) 
[Fri May 18 03:42:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 03:42:21 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 03:42:21 2012] Setting source spectrum file to fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri May 18 03:42:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Fri May 18 04:11:46 2012] Not generating rmf since there are only 41 counts
[Fri May 18 04:11:46 2012] rmf not generated due to insufficient counts
[Fri May 18 04:18:13 2012] Updating aperture counts using extracted products
[Fri May 18 04:18:13 2012] Error reading totcts from fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri May 18 04:18:15 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 04:18:15 2012] Using photon index=1.80, rate=0.00114, arf fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src31.arf
[Fri May 18 04:18:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 04:18:15 2012] Updating source flux to 3.1e-14
[Fri May 18 04:18:53 2012] Source 31 has fewer than 100.000000 counts, skipping spectral fitting