[Thu May 17 09:26:06 2012] Detection parameters:
  Position = (407.9, 466.7) = 16 54 20.95 -40 58 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.9 +/- 11.1
  Background counts = 17.0
  Rate = 0.001 +/- 0.0003

[Thu May 17 09:26:08 2012] Off-axis axis estimate = 14.55'
[Thu May 17 15:31:59 2012] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Thu May 17 15:31:59 2012] Initial guess for spatial extent in simple fitting = 13.70"
[Thu May 17 15:31:59 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.051
[Thu May 17 15:31:59 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 13.70"
[Thu May 17 17:07:10 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src33.ximg exists
[Thu May 17 17:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src33.csv
[Thu May 17 17:07:10 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src33_1.ximg exists
[Thu May 17 17:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src33.csv
[Thu May 17 17:07:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 17:07:10 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Thu May 17 17:07:10 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Thu May 17 17:07:10 2012] Fit fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Thu May 17 17:08:00 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.965096 pixels away
[Thu May 17 17:08:00 2012] Vigneting correction estimate = 1.000000
[Thu May 17 17:08:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 17:08:00 2012] Assessing source extent using major
[Thu May 17 17:08:00 2012] Source does appear to be extended
[Thu May 17 17:08:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 22:32:17 2012] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Thu May 17 22:32:17 2012] Initial guess for spatial extent in simple fitting = 13.70"
[Thu May 17 22:32:17 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.051
[Thu May 17 22:32:17 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 13.70"
[Fri May 18 00:01:06 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_src33.ximg exists
[Fri May 18 00:01:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_src33.csv
[Fri May 18 00:01:06 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_src33_1.ximg exists
[Fri May 18 00:01:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_src33.csv
[Fri May 18 00:01:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 00:01:06 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Fri May 18 00:01:06 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Fri May 18 00:01:06 2012] Fit fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Fri May 18 00:01:56 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.561961 pixels away
[Fri May 18 00:01:56 2012] Vigneting correction estimate = 1.000000
[Fri May 18 00:01:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 00:01:56 2012] Assessing source extent using major
[Fri May 18 00:01:56 2012] Source does appear to be extended
[Fri May 18 00:01:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 03:34:52 2012] XMMSAS src. selection expression = ellipse(35437.214417, 40552.685913, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 18 03:34:52 2012] Writing source region out to fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src3_src.reg
[Fri May 18 03:34:52 2012] Extracting stamp from image fullrun_mos2_xmm0602020101_pi300-10000_cl_sm2.00.img.gz, (370, 429) - (445, 504)
[Fri May 18 03:34:52 2012] XMMSAS bgd. selection expression = annulus(35437.214417, 40552.685913, 1087.500000, 2175.000000, X, Y) && !ellipse(33969.243408, 37657.108307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35693.103485, 38213.342255, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 18 03:34:52 2012] Writing fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src3.gif
[Fri May 18 03:53:49 2012] Mean detx,y = (-9217.99, 12490.18) 
[Fri May 18 03:53:52 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 03:54:28 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 03:54:28 2012] Setting source spectrum file to fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 18 03:54:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri May 18 04:16:09 2012] Not generating rmf since there are only 52 counts
[Fri May 18 04:16:09 2012] rmf not generated due to insufficient counts
[Fri May 18 04:18:14 2012] Updating aperture counts using extracted products
[Fri May 18 04:18:14 2012] Error reading totcts from fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 18 04:18:16 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 04:18:16 2012] Using photon index=1.80, rate=0.00144, arf fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src3.arf
[Fri May 18 04:18:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 04:18:16 2012] Updating source flux to 4.8e-14
[Fri May 18 04:18:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting