[Thu May 17 09:26:06 2012] Detection parameters:
  Position = (403.3, 142.6) = 16 54 22.46 -41 21 49.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.8 +/- 11.5
  Background counts = 13.4
  Rate = 0.002 +/- 0.0003

[Thu May 17 09:26:08 2012] Off-axis axis estimate = 13.62'
[Thu May 17 15:31:59 2012] Using EEF radius (= 13.24 ")to estimate initial spatial extent for simple fitting
[Thu May 17 15:31:59 2012] Initial guess for spatial extent in simple fitting = 13.24"
[Thu May 17 15:31:59 2012] source mask rpix=3.0, npix_max = 50, mask sum = 35, frac = 0.697
[Thu May 17 15:31:59 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 13.24"
[Thu May 17 17:07:10 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src20.ximg exists
[Thu May 17 17:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src20.csv
[Thu May 17 17:07:10 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu May 17 17:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src20.csv
[Thu May 17 17:07:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 17:07:10 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu May 17 17:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Thu May 17 17:07:10 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu May 17 17:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Thu May 17 17:07:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 17:08:00 2012] Spatial fit model total counts = 255.611000, observed total counts = 156.000000
[Thu May 17 17:08:00 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 17 17:08:00 2012] Vigneting correction estimate = 1.000000
[Thu May 17 17:08:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 17:08:00 2012] Assessing source extent using major
[Thu May 17 17:08:00 2012] Source does appear to be extended
[Thu May 17 17:08:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 22:32:17 2012] Using EEF radius (= 13.24 ")to estimate initial spatial extent for simple fitting
[Thu May 17 22:32:17 2012] Initial guess for spatial extent in simple fitting = 13.24"
[Thu May 17 22:32:17 2012] source mask rpix=3.0, npix_max = 50, mask sum = 35, frac = 0.697
[Thu May 17 22:32:17 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 13.24"
[Fri May 18 00:01:06 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_src20.ximg exists
[Fri May 18 00:01:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_src20.csv
[Fri May 18 00:01:06 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri May 18 00:01:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_src20.csv
[Fri May 18 00:01:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 00:01:06 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri May 18 00:01:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri May 18 00:01:06 2012] fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri May 18 00:01:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri May 18 00:01:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 00:01:56 2012] Spatial fit model total counts = 423.193000, observed total counts = 156.000000
[Fri May 18 00:01:56 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 18 00:01:56 2012] Vigneting correction estimate = 1.000000
[Fri May 18 00:01:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 00:01:56 2012] Assessing source extent using major
[Fri May 18 00:01:56 2012] Source does appear to be extended
[Fri May 18 00:01:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 03:34:52 2012] XMMSAS src. selection expression = ellipse(35041.054840, 12354.097656, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 18 03:34:52 2012] Writing source region out to fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src2_src.reg
[Fri May 18 03:34:52 2012] Extracting stamp from image fullrun_mos2_xmm0602020101_pi300-10000_cl_sm2.00.img.gz, (366, 105) - (441, 180)
[Fri May 18 03:34:52 2012] XMMSAS bgd. selection expression = annulus(35041.054840, 12354.097656, 1087.500000, 2175.000000, X, Y) && !ellipse(35704.403290, 14766.685608, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 18 03:34:52 2012] Writing fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src2.gif
[Fri May 18 03:45:55 2012] Mean detx,y = (-7058.34, -15618.79) 
[Fri May 18 03:45:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 03:46:42 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 03:46:42 2012] Setting source spectrum file to fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May 18 03:46:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri May 18 04:12:59 2012] Not generating rmf since there are only 76 counts
[Fri May 18 04:12:59 2012] rmf not generated due to insufficient counts
[Fri May 18 04:18:14 2012] Updating aperture counts using extracted products
[Fri May 18 04:18:14 2012] Error reading totcts from fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May 18 04:18:16 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 04:18:16 2012] Using photon index=1.80, rate=0.0021, arf fullrun_mos2_xmm0602020101_pi300-10000_pass1_cl_src2.arf
[Fri May 18 04:18:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 04:18:16 2012] Updating source flux to 1.2e-13
[Fri May 18 04:18:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting