[Thu May 17 09:25:27 2012] Detection parameters:
  Position = (310.0, 317.3) = 16 54 58.54 -41 9 2.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 314.6 +/- 22.7
  Background counts = 20.1
  Rate = 0.01 +/- 0.0007

[Thu May 17 09:25:28 2012] Off-axis axis estimate = 1.60'
[Thu May 17 13:59:45 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Thu May 17 13:59:45 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Thu May 17 13:59:45 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.856
[Thu May 17 13:59:45 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.23"
[Thu May 17 15:31:57 2012] fullrun_mos1_xmm0602020101_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 17 15:31:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602020101_pi300-10000_cl_pass0_src2.csv
[Thu May 17 15:31:57 2012] fullrun_mos1_xmm0602020101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 17 15:31:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602020101_pi300-10000_cl_pass0_src2.csv
[Thu May 17 15:31:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602020101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602020101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 15:31:58 2012] fullrun_mos1_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 17 15:31:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 17 15:31:58 2012] fullrun_mos1_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 17 15:31:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 17 15:31:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 17:07:49 2012] Source 3 is offset by -6.648911 and 5.946305 pixels which is larger than
2 X fitted extent = 0.831094 x 0.831094, not incorporating fit results
[Thu May 17 17:07:49 2012] Vigneting correction estimate = 1.000000
[Thu May 17 17:07:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 17:07:49 2012] Assessing source extent using major
[Thu May 17 17:07:49 2012] Source does appear to be extended
[Thu May 17 17:07:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 21:11:49 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Thu May 17 21:11:49 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Thu May 17 21:11:49 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.856
[Thu May 17 21:11:49 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.23"
[Thu May 17 22:32:16 2012] fullrun_mos1_xmm0602020101_pi300-10000_cl_pass1_src2.ximg exists
[Thu May 17 22:32:16 2012] fullrun_mos1_xmm0602020101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May 17 22:32:16 2012] Fit fullrun_mos1_xmm0602020101_pi300-10000_cl_pass1_src2 appears to have run properly
[Thu May 17 22:32:16 2012] fullrun_mos1_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May 17 22:32:16 2012] fullrun_mos1_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May 17 22:32:16 2012] Fit fullrun_mos1_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri May 18 00:01:45 2012] Spatial fit model total counts = 428.162000, observed total counts = 444.000000
[Fri May 18 00:01:45 2012] Offset between fit and detection position for source 3 = 0.738411 pixels
[Fri May 18 00:01:45 2012] 423.246000 total counts/ 248.333000 bgd. counts: snr = 11.099537
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.738411 pixels
  Position = (310.0, 318.0) = 16 54 58.54 -41 9 4.7
  Extent = 5.4" x 3.6", rotation angle = 355
  Source counts = 174.9 +/- 20.6
  Background counts = 248.3
  Rate = 0.005 +/- 0.0006
[Fri May 18 00:01:45 2012] Vigneting correction estimate = 1.000000
[Fri May 18 00:01:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 00:01:45 2012] Assessing source extent using major
[Fri May 18 00:01:45 2012] Source does appear to be extended
[Fri May 18 00:01:45 2012] Computing asymmetry using major and minor axis, asym = 1.51
[Fri May 18 00:01:45 2012] Source is asymmetric
[Fri May 18 02:54:43 2012] XMMSAS src. selection expression = ellipse(26920.866035, 27620.625272, 323.942534, 214.671875, 354.787530, X, Y)
[Fri May 18 02:54:43 2012] Writing source region out to fullrun_mos1_xmm0602020101_pi300-10000_pass1_cl_src3_src.reg
[Fri May 18 02:54:43 2012] Extracting stamp from image fullrun_mos1_xmm0602020101_pi300-10000_cl_sm2.00.img.gz, (291, 299) - (329, 337)
[Fri May 18 02:54:43 2012] XMMSAS bgd. selection expression = annulus(26920.866035, 27620.625272, 539.904223, 1079.808447, X, Y)
[Fri May 18 02:54:43 2012] Writing fullrun_mos1_xmm0602020101_pi300-10000_pass1_cl_src3.gif
[Fri May 18 02:55:11 2012] Mean detx,y = (240.10, -270.88) 
[Fri May 18 02:55:14 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 02:55:28 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 02:55:28 2012] Setting source spectrum file to fullrun_mos1_xmm0602020101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 18 02:55:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602020101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri May 18 04:18:09 2012] Updating aperture counts using extracted products
[Fri May 18 04:18:09 2012] Error reading totcts from fullrun_mos1_xmm0602020101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 18 04:18:11 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 04:18:11 2012] Using photon index=1.80, rate=0.00478, arf fullrun_mos1_xmm0602020101_pi300-10000_pass1_cl_src3.arf
[Fri May 18 04:18:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 04:18:11 2012] Updating source flux to 7.3e-14
[Fri May 18 04:18:20 2012] Flag b found in src. 3 procflags, skipping spectral fitting