[Thu May 17 09:25:27 2012] Detection parameters:
  Position = (448.5, 377.2) = 16 54 5.26 -41 4 46.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 323.3 +/- 22.7
  Background counts = 17.9
  Rate = 0.02 +/- 0.001

[Thu May 17 09:25:28 2012] Off-axis axis estimate = 12.29'
[Thu May 17 13:59:45 2012] Using EEF radius (= 12.57 ")to estimate initial spatial extent for simple fitting
[Thu May 17 13:59:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 17 13:59:45 2012] Initial guess for spatial extent in simple fitting = 12.57"
[Thu May 17 13:59:45 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.066
[Thu May 17 13:59:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.57"
[Thu May 17 15:31:57 2012] fullrun_mos1_xmm0602020101_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 17 15:31:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602020101_pi300-10000_cl_pass0_src1.csv
[Thu May 17 15:31:57 2012] fullrun_mos1_xmm0602020101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 17 15:31:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0602020101_pi300-10000_cl_pass0_src1.csv
[Thu May 17 15:31:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0602020101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0602020101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 15:31:58 2012] fullrun_mos1_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 17 15:31:58 2012] fullrun_mos1_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 17 15:31:58 2012] Fit fullrun_mos1_xmm0602020101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 17 17:07:49 2012] Spatial fit model total counts = 698.964000, observed total counts = 687.000000
[Thu May 17 17:07:49 2012] Offset between fit and detection position for source 1 = 0.492417 pixels
[Thu May 17 17:07:49 2012] 695.973000 total counts/ 447.894000 bgd. counts: snr = 11.722018
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.492417 pixels
  Position = (448.0, 377.4) = 16 54 5.43 -41 4 45.7
  Extent = 6.8 (5.9-7.7)", rotation angle = 0
  Source counts = 248.1 +/- 26.4
  Background counts = 447.9
  Rate = 0.007 +/- 0.0007
[Thu May 17 17:07:49 2012] Vigneting correction estimate = 1.000000
[Thu May 17 17:07:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 17:07:49 2012] Assessing source extent using major axis lower bound
[Thu May 17 17:07:49 2012] Source does appear to be extended
[Thu May 17 17:07:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 21:11:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 21:11:49 2012] Initial guess for spatial extent in simple fitting = 6.77"
[Thu May 17 21:11:49 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.945
[Thu May 17 21:11:49 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.77"
[Thu May 17 22:32:16 2012] fullrun_mos1_xmm0602020101_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 17 22:32:16 2012] fullrun_mos1_xmm0602020101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 17 22:32:16 2012] Fit fullrun_mos1_xmm0602020101_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu May 17 22:32:16 2012] fullrun_mos1_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 17 22:32:16 2012] fullrun_mos1_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 17 22:32:16 2012] Fit fullrun_mos1_xmm0602020101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May 18 00:01:45 2012] Spatial fit model total counts = 457.813000, observed total counts = 448.000000
[Fri May 18 00:01:45 2012] Offset between fit and detection position for source 1 = 0.056559 pixels
[Fri May 18 00:01:45 2012] 461.949000 total counts/ 221.000000 bgd. counts: snr = 16.207984
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.056559 pixels
  Position = (448.0, 377.3) = 16 54 5.43 -41 4 46.0
  Extent = 6.5 (5.6-7.6)", rotation angle = 0
  Source counts = 240.9 +/- 21.5
  Background counts = 221.0
  Rate = 0.007 +/- 0.0006
[Fri May 18 00:01:45 2012] Vigneting correction estimate = 1.000000
[Fri May 18 00:01:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 00:01:45 2012] Assessing source extent using major axis lower bound
[Fri May 18 00:01:45 2012] Source does appear to be extended
[Fri May 18 00:01:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 02:54:43 2012] XMMSAS src. selection expression = ellipse(38931.302200, 32777.763800, 387.662411, 387.662411, 0.000000, X, Y)
[Fri May 18 02:54:43 2012] Writing source region out to fullrun_mos1_xmm0602020101_pi300-10000_pass1_cl_src1_src.reg
[Fri May 18 02:54:43 2012] Extracting stamp from image fullrun_mos1_xmm0602020101_pi300-10000_cl_sm2.00.img.gz, (426, 355) - (470, 400)
[Fri May 18 02:54:43 2012] XMMSAS bgd. selection expression = annulus(38931.302200, 32777.763800, 646.104019, 1292.208037, X, Y)
[Fri May 18 02:54:43 2012] Writing fullrun_mos1_xmm0602020101_pi300-10000_pass1_cl_src1.gif
[Fri May 18 02:54:48 2012] Mean detx,y = (4621.01, 12056.90) 
[Fri May 18 02:54:50 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 02:55:05 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 02:55:06 2012] Setting source spectrum file to fullrun_mos1_xmm0602020101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 18 02:55:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0602020101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri May 18 04:18:09 2012] Updating aperture counts using extracted products
[Fri May 18 04:18:09 2012] Error reading totcts from fullrun_mos1_xmm0602020101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 18 04:18:11 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 04:18:11 2012] Using photon index=1.80, rate=0.00658, arf fullrun_mos1_xmm0602020101_pi300-10000_pass1_cl_src1.arf
[Fri May 18 04:18:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 04:18:11 2012] Updating source flux to 1.6e-13
[Fri May 18 04:18:53 2012] Reading fit data from xmm0602020101/analysis//spectral/fullrun_mos1_xmm0602020101_pi300-10000_pass1_cl_src1_pl.csv
[Fri May 18 04:18:53 2012] Spectral fit parameter nH value = 8.89058e+21
[Fri May 18 04:18:53 2012] Spectral fit parameter PhoIndex value = 8.5512
[Fri May 18 04:18:53 2012] Failed to get F(0.3-8.0) from xmm0602020101/analysis//spectral/fullrun_mos1_xmm0602020101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri May 18 04:18:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 04:18:53 2012] Using Nh = 8.9e+21, photon index=8.55, rate=0.00658, arf fullrun_mos1_xmm0602020101_pi300-10000_pass1_cl_src1.arf
[Fri May 18 04:18:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 04:18:53 2012] Updating source flux to 9.1e-14