[Thu Jun 20 00:50:14 2013] Detection parameters:
  Position = (269.7, 128.5) = 11 51 13.14 -29 2 26.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.0 +/- 20.9
  Background counts = 142.4
  Rate = 0.001 +/- 0.0002

[Thu Jun 20 00:50:14 2013] Off-axis axis estimate = 12.50'
[Thu Jun 20 00:51:16 2013] Using EEF radius (= 12.68 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 00:51:16 2013] Initial guess for spatial extent in simple fitting = 12.68"
[Thu Jun 20 00:51:16 2013] source mask rpix=2.9, npix_max = 46, mask sum = 47, frac = 1.008
[Thu Jun 20 00:51:16 2013] Giving source the simple spatial ID 84 for pass 0, mean size = 12.68"
[Thu Jun 20 00:51:21 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src84.ximg exists
[Thu Jun 20 00:51:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src84.csv
[Thu Jun 20 00:51:21 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src84_1.ximg exists
[Thu Jun 20 00:51:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src84.csv
[Thu Jun 20 00:51:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src84_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:51:25 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src84.ximg exists
[Thu Jun 20 00:51:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src84.csv
[Thu Jun 20 00:51:25 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src84_1.ximg exists
[Thu Jun 20 00:51:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src84.csv
[Thu Jun 20 00:51:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src84_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:52:12 2013] Source 88 is offset by -3.459472 and 2.293394 pixels which is larger than
2 X fitted extent = 11.324782 x 1.415600, not incorporating fit results
[Thu Jun 20 00:52:12 2013] Warning: source 83 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 88 at 14.126456 pixels away
[Thu Jun 20 00:52:12 2013] Warning, spatial fit 84 centroid is now closest to src. 29
[Thu Jun 20 00:52:12 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 00:52:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 00:52:12 2013] Assessing source extent using major
[Thu Jun 20 00:52:12 2013] Source does appear to be extended
[Thu Jun 20 00:52:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 00:52:12 2013] Source is confused with source 25
[Thu Jun 20 00:52:59 2013] Using EEF radius (= 12.68 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 00:52:59 2013] Initial guess for spatial extent in simple fitting = 12.68"
[Thu Jun 20 00:52:59 2013] source mask rpix=2.9, npix_max = 46, mask sum = 47, frac = 1.008
[Thu Jun 20 00:52:59 2013] Giving source the simple spatial ID 81 for pass 1, mean size = 12.68"
[Thu Jun 20 00:53:03 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src81.ximg exists
[Thu Jun 20 00:53:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src81.csv
[Thu Jun 20 00:53:03 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src81_1.ximg exists
[Thu Jun 20 00:53:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src81.csv
[Thu Jun 20 00:53:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src81_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:53:05 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src81.ximg exists
[Thu Jun 20 00:53:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src81.csv
[Thu Jun 20 00:53:05 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src81_1.ximg exists
[Thu Jun 20 00:53:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src81.csv
[Thu Jun 20 00:53:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:53:36 2013] Source 88 is offset by 0.859447 and 3.663509 pixels which is larger than
2 X fitted extent = 1.586864 x 1.586864, not incorporating fit results
[Thu Jun 20 00:53:37 2013] Warning: source 79 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 88 at 15.075118 pixels away
[Thu Jun 20 00:53:37 2013] Warning, spatial fit 81 centroid is now closest to src. 49
[Thu Jun 20 00:53:37 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 00:53:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 00:53:37 2013] Assessing source extent using major
[Thu Jun 20 00:53:37 2013] Source does appear to be extended
[Thu Jun 20 00:53:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 00:54:25 2013] XMMSAS src. selection expression = ellipse(23412.315918, 11128.269302, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 00:54:25 2013] Not overwriting source region fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src88_src.reg
[Thu Jun 20 00:54:25 2013] Extracting stamp from image fullrun_pn_xmm0602010301_pi300-10000_cl_sm2.00.img.gz, (232, 91) - (307, 166)
[Thu Jun 20 00:54:25 2013] XMMSAS bgd. selection expression = annulus(23412.315918, 11128.269302, 1087.500000, 2175.000000, X, Y) && !ellipse(25835.192400, 13109.621400, 486.795214, 486.795214, 0.000000, X, Y) && !ellipse(23012.476471, 10739.194008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24475.856934, 11859.909088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22341.460297, 10563.791489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24972.716461, 12490.396240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25746.076050, 11980.921341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21417.110519, 10889.521103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24300.874573, 11304.905746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21410.154343, 10180.531372, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 00:54:25 2013] Writing fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src88.gif
[Thu Jun 20 00:55:23 2013] ../../xmm0602010301/products/events/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src88_src.evt and ../../xmm0602010301/products/events/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src88_bgd.evt exist, delete to re-create
[Thu Jun 20 00:55:24 2013] Mean detx,y = (-9217.08, 13972.02) 
[Thu Jun 20 00:55:24 2013] ../../xmm0602010301/products/images/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src88_src.img and ../../xmm0602010301/products/images/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src88_bgd.img exist, delete to re-create
[Thu Jun 20 00:55:24 2013] ../../xmm0602010301/products/spectra/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src88_src_b10.pi.gz and ../../xmm0602010301/products/spectra/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src88_bgd.pi exist, delete to re-create
[Thu Jun 20 00:55:24 2013] Setting source spectrum file to fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Thu Jun 20 00:55:24 2013] Setting bgd. spectrum file to fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src88_bgd.pi.gz
[Thu Jun 20 00:55:24 2013] ../../xmm0602010301/products/lightcurves/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src88_src.lc and ../../xmm0602010301/products/lightcurves/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src88_bgd.lc exist, delete to re-create
[Thu Jun 20 00:55:57 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 00:55:57 2013] rmf not generated due to insufficient counts
[Thu Jun 20 00:55:57 2013] fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src88.arf exists, delete to re-create
[Thu Jun 20 02:47:09 2013] Updating aperture counts using extracted products
[Thu Jun 20 02:47:09 2013] Total counts from fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src88_src_b10.pi.gz = 762.00
[Thu Jun 20 02:47:09 2013] Total counts from fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src88_bgd.pi.gz = 1887.00
[Thu Jun 20 02:47:09 2013] Got source and background scale factors 978524.000000, 1815204.000000
[Thu Jun 20 02:47:09 2013] User source parameters:
  Position = (269.7, 128.5) = 11 51 13.14 -29 2 26.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -255.2 +/- 28.6
  Background aperture counts = 1017.2
  Rate = -0.003 +/- 0.0003

[Thu Jun 20 02:47:09 2013] Updating counts from extracted products
[Thu Jun 20 02:47:09 2013] Set source signif. to -255.23/31.89 = -8.00
[Thu Jun 20 02:47:13 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 02:47:13 2013] Using photon index=1.80, rate=-0.00271, arf fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src88.arf
[Thu Jun 20 02:47:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 02:47:13 2013] Updated flux is not positive, keeping original flux
[Thu Jun 20 02:48:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 02:48:32 2013] xmm0602010301/analysis//spectral/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src88_pl.csv not found, spectral fit skipped or did not complete