[Thu Jun 20 00:50:13 2013] Detection parameters:
  Position = (246.7, 125.7) = 11 51 20.75 -29 2 33.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.2 +/- 24.2
  Background counts = 135.5
  Rate = 0.001 +/- 0.0002

[Thu Jun 20 00:50:14 2013] Off-axis axis estimate = 13.07'
[Thu Jun 20 00:51:16 2013] Using EEF radius (= 12.96 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 00:51:16 2013] Initial guess for spatial extent in simple fitting = 12.96"
[Thu Jun 20 00:51:16 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.011
[Thu Jun 20 00:51:16 2013] Giving source the simple spatial ID 82 for pass 0, mean size = 12.96"
[Thu Jun 20 00:51:21 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src82.ximg exists
[Thu Jun 20 00:51:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src82.csv
[Thu Jun 20 00:51:21 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src82_1.ximg exists
[Thu Jun 20 00:51:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src82.csv
[Thu Jun 20 00:51:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:51:25 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src82.ximg exists
[Thu Jun 20 00:51:25 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src82_1.ximg exists
[Thu Jun 20 00:51:25 2013] Fit fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src82 appears to have run properly
[Thu Jun 20 00:52:12 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 86 at 12.153971 pixels away
[Thu Jun 20 00:52:12 2013] Spatial fit model total counts = 2317.200000, observed total counts = 1327.000000
[Thu Jun 20 00:52:12 2013] Poor agreement between spatial fit and data for source 86
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 00:52:12 2013] Warning, spatial fit 82 centroid is now closest to src. 49
[Thu Jun 20 00:52:12 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 00:52:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 00:52:12 2013] Assessing source extent using major
[Thu Jun 20 00:52:12 2013] Source does appear to be extended
[Thu Jun 20 00:52:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 00:52:59 2013] Using EEF radius (= 12.96 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 00:52:59 2013] Initial guess for spatial extent in simple fitting = 12.96"
[Thu Jun 20 00:52:59 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.011
[Thu Jun 20 00:52:59 2013] Giving source the simple spatial ID 79 for pass 1, mean size = 12.96"
[Thu Jun 20 00:53:03 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src79.ximg exists
[Thu Jun 20 00:53:03 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src79.csv
[Thu Jun 20 00:53:03 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src79_1.ximg exists
[Thu Jun 20 00:53:03 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src79.csv
[Thu Jun 20 00:53:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src79_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:53:05 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Thu Jun 20 00:53:05 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Thu Jun 20 00:53:05 2013] Fit fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src79 appears to have run properly
[Thu Jun 20 00:53:37 2013] Warning, spatial fit 79 centroid is now closest to src. 88
[Thu Jun 20 00:53:37 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 00:53:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 00:53:37 2013] Assessing source extent using major
[Thu Jun 20 00:53:37 2013] Source does appear to be extended
[Thu Jun 20 00:53:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 00:54:25 2013] XMMSAS src. selection expression = ellipse(21417.110519, 10889.521103, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 00:54:25 2013] Not overwriting source region fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src86_src.reg
[Thu Jun 20 00:54:25 2013] Extracting stamp from image fullrun_pn_xmm0602010301_pi300-10000_cl_sm2.00.img.gz, (209, 88) - (284, 163)
[Thu Jun 20 00:54:25 2013] XMMSAS bgd. selection expression = annulus(21417.110519, 10889.521103, 1087.500000, 2175.000000, X, Y) && !ellipse(23012.476471, 10739.194008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22341.460297, 10563.791489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24300.874573, 11304.905746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23412.315918, 11128.269302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21410.154343, 10180.531372, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 00:54:25 2013] Writing fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src86.gif
[Thu Jun 20 00:55:21 2013] ../../xmm0602010301/products/events/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src86_src.evt and ../../xmm0602010301/products/events/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src86_bgd.evt exist, delete to re-create
[Thu Jun 20 00:55:21 2013] Mean detx,y = (-11116.90, 13529.49) 
[Thu Jun 20 00:55:21 2013] ../../xmm0602010301/products/images/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src86_src.img and ../../xmm0602010301/products/images/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src86_bgd.img exist, delete to re-create
[Thu Jun 20 00:55:21 2013] ../../xmm0602010301/products/spectra/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src86_src_b10.pi.gz and ../../xmm0602010301/products/spectra/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src86_bgd.pi exist, delete to re-create
[Thu Jun 20 00:55:21 2013] Setting source spectrum file to fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Thu Jun 20 00:55:21 2013] Setting bgd. spectrum file to fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src86_bgd.pi.gz
[Thu Jun 20 00:55:21 2013] ../../xmm0602010301/products/lightcurves/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src86_src.lc and ../../xmm0602010301/products/lightcurves/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src86_bgd.lc exist, delete to re-create
[Thu Jun 20 00:55:57 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 00:55:57 2013] rmf not generated due to insufficient counts
[Thu Jun 20 00:55:57 2013] fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src86.arf exists, delete to re-create
[Thu Jun 20 02:47:08 2013] Updating aperture counts using extracted products
[Thu Jun 20 02:47:08 2013] Total counts from fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src86_src_b10.pi.gz = 986.00
[Thu Jun 20 02:47:08 2013] Total counts from fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src86_bgd.pi.gz = 3327.00
[Thu Jun 20 02:47:09 2013] Got source and background scale factors 1329600.000000, 3765032.000000
[Thu Jun 20 02:47:09 2013] User source parameters:
  Position = (246.7, 125.7) = 11 51 20.75 -29 2 33.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -188.9 +/- 32.4
  Background aperture counts = 1174.9
  Rate = -0.002 +/- 0.0003

[Thu Jun 20 02:47:09 2013] Updating counts from extracted products
[Thu Jun 20 02:47:09 2013] Set source signif. to -188.91/34.28 = -5.51
[Thu Jun 20 02:47:13 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 02:47:13 2013] Using photon index=1.80, rate=-0.002, arf fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src86.arf
[Thu Jun 20 02:47:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 02:47:13 2013] Updated flux is not positive, keeping original flux
[Thu Jun 20 02:48:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 02:48:32 2013] xmm0602010301/analysis//spectral/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src86_pl.csv not found, spectral fit skipped or did not complete