[Thu Jun 20 00:50:11 2013] Detection parameters:
  Position = (290.8, 305.1) = 11 51 6.13 -28 49 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 190.5 +/- 28.3
  Background counts = 260.4
  Rate = 0.002 +/- 0.0003

[Thu Jun 20 00:50:14 2013] Off-axis axis estimate = 0.73'
[Thu Jun 20 00:51:16 2013] Using EEF radius (= 6.80 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 00:51:16 2013] Initial guess for spatial extent in simple fitting = 6.80"
[Thu Jun 20 00:51:16 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.941
[Thu Jun 20 00:51:16 2013] Giving source the simple spatial ID 58 for pass 0, mean size = 6.80"
[Thu Jun 20 00:51:20 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src58.ximg exists
[Thu Jun 20 00:51:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src58.csv
[Thu Jun 20 00:51:20 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src58_1.ximg exists
[Thu Jun 20 00:51:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src58.csv
[Thu Jun 20 00:51:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:51:22 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Thu Jun 20 00:51:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src58.csv
[Thu Jun 20 00:51:23 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Thu Jun 20 00:51:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src58.csv
[Thu Jun 20 00:51:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010301_pi300-10000_cl_pass0_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:52:12 2013] Source 61 is offset by 2.173878 and -4.316975 pixels which is larger than
2 X fitted extent = 0.827232 x 0.827232, not incorporating fit results
[Thu Jun 20 00:52:12 2013] Spatial fit model total counts = 3170.170000, observed total counts = 2729.000000
[Thu Jun 20 00:52:12 2013] Poor agreement between spatial fit and data for source 61
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 00:52:12 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 00:52:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 00:52:12 2013] Assessing source extent using major
[Thu Jun 20 00:52:12 2013] Source does appear to be extended
[Thu Jun 20 00:52:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 00:52:59 2013] Using EEF radius (= 6.80 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 00:52:59 2013] Initial guess for spatial extent in simple fitting = 6.80"
[Thu Jun 20 00:52:59 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.941
[Thu Jun 20 00:52:59 2013] Giving source the simple spatial ID 57 for pass 1, mean size = 6.80"
[Thu Jun 20 00:53:03 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src57.ximg exists
[Thu Jun 20 00:53:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src57.csv
[Thu Jun 20 00:53:03 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src57_1.ximg exists
[Thu Jun 20 00:53:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src57.csv
[Thu Jun 20 00:53:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:53:05 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Thu Jun 20 00:53:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src57.csv
[Thu Jun 20 00:53:05 2013] fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Thu Jun 20 00:53:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src57.csv
[Thu Jun 20 00:53:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0602010301_pi300-10000_cl_pass1_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 00:53:37 2013] Source 61 is offset by -3.027432 and 0.884335 pixels which is larger than
2 X fitted extent = 1.477393 x 1.477393, not incorporating fit results
[Thu Jun 20 00:53:37 2013] Spatial fit model total counts = 3414.470000, observed total counts = 2729.000000
[Thu Jun 20 00:53:37 2013] Poor agreement between spatial fit and data for source 61
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 00:53:37 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 00:53:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 00:53:37 2013] Assessing source extent using major
[Thu Jun 20 00:53:37 2013] Source does appear to be extended
[Thu Jun 20 00:53:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 00:54:24 2013] XMMSAS src. selection expression = ellipse(25250.379425, 26492.171143, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 00:54:24 2013] Not overwriting source region fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src61_src.reg
[Thu Jun 20 00:54:24 2013] Extracting stamp from image fullrun_pn_xmm0602010301_pi300-10000_cl_sm2.00.img.gz, (253, 268) - (328, 343)
[Thu Jun 20 00:54:24 2013] XMMSAS bgd. selection expression = annulus(25250.379425, 26492.171143, 1087.500000, 2175.000000, X, Y) && !ellipse(26377.003400, 27937.971600, 2294.004066, 2294.004066, 0.000000, X, Y) && !ellipse(25903.198029, 29083.065552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24329.352417, 28393.294250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27160.633179, 26919.976013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26037.619507, 29496.474854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25504.240051, 28905.614014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25041.131256, 27539.033264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24484.347717, 27374.575439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23733.595703, 26934.483093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25758.039612, 25925.569305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26879.877106, 25626.074036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23965.560400, 25536.942000, 475.532814, 475.532814, 0.000000, X, Y) && !ellipse(27121.763200, 24646.545400, 396.678411, 396.678411, 0.000000, X, Y)
[Thu Jun 20 00:54:24 2013] Writing fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src61.gif
[Thu Jun 20 00:55:07 2013] ../../xmm0602010301/products/events/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src61_src.evt and ../../xmm0602010301/products/events/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src61_bgd.evt exist, delete to re-create
[Thu Jun 20 00:55:07 2013] Mean detx,y = (-1403.31, 648.39) 
[Thu Jun 20 00:55:07 2013] ../../xmm0602010301/products/images/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src61_src.img and ../../xmm0602010301/products/images/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src61_bgd.img exist, delete to re-create
[Thu Jun 20 00:55:07 2013] ../../xmm0602010301/products/spectra/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src61_src_b10.pi.gz and ../../xmm0602010301/products/spectra/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src61_bgd.pi exist, delete to re-create
[Thu Jun 20 00:55:07 2013] Setting source spectrum file to fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Thu Jun 20 00:55:07 2013] Setting bgd. spectrum file to fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Thu Jun 20 00:55:07 2013] ../../xmm0602010301/products/lightcurves/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src61_src.lc and ../../xmm0602010301/products/lightcurves/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src61_bgd.lc exist, delete to re-create
[Thu Jun 20 00:55:57 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 00:55:57 2013] rmf not generated due to insufficient counts
[Thu Jun 20 00:55:57 2013] fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src61.arf exists, delete to re-create
[Thu Jun 20 02:47:01 2013] Updating aperture counts using extracted products
[Thu Jun 20 02:47:01 2013] Total counts from fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src61_src_b10.pi.gz = 1939.00
[Thu Jun 20 02:47:01 2013] Total counts from fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src61_bgd.pi.gz = 1767.00
[Thu Jun 20 02:47:02 2013] Got source and background scale factors 1329624.000000, 2092588.000000
[Thu Jun 20 02:47:02 2013] User source parameters:
  Position = (290.8, 305.1) = 11 51 6.13 -28 49 34.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 816.3 +/- 45.0
  Background aperture counts = 1122.7
  Rate = 0.009 +/- 0.0005

[Thu Jun 20 02:47:02 2013] Updating counts from extracted products
[Thu Jun 20 02:47:02 2013] Set source signif. to 816.25/33.51 = 24.36
[Thu Jun 20 02:47:12 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 02:47:12 2013] Using photon index=1.80, rate=0.00866, arf fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src61.arf
[Thu Jun 20 02:47:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 02:47:12 2013] Updating source flux to 2.9e-14
[Thu Jun 20 02:48:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 02:48:32 2013] xmm0602010301/analysis//spectral/fullrun_pn_xmm0602010301_pi300-10000_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete